Can't run XGGI on Cygwin 1.0

[Suhaib M. Siddiqi]

Can 
you try moving the your g:/usr/local on c:\ drive under 
/usr/local
The 
dlls are under /usr/local and rest of the ggi stuff should be under 
/usr/local/gg.
I will 
send you my config files directly to you.
It 
seems to me that XGGI is not finding the libraries under your 
configuration.
 
Suhaib
 

  -----Original Message----- From: Steve Kelem 
  [mailto:kelem@adaptivesilicon.com] Sent: Monday, March 27, 2000 4:49 
  PM To: Suhaib M. Siddiqi Cc: Cygwin-Xfree@Sourceware. 
  Cygnus. Com Subject: Re: Can't run XGGI on Cygwin 
  1.0 John Fortin wrote: 
  > > To answer your problems: > > .root: 
    G:/Cygwin/usr/local/lib/ggi > > > This should be .root 
    /g/usr/local/lib/ggi > > Fixed this line. > 
    Actually. it should be     .root: 
    G:/Cygwin/usr/local/lib/ggi because the libGGI libraries are not cygwin 
    libraries, but mingw libraries and do not understand cygwin 
  mounts. Thanks.  I tried this too, and it didn't work. 
  "Suhaib M. Siddiqi" wrote: 
  > % ls -l /usr/local/lib/*ggi* > 
    -rw-r--r--   1 kelem    Administ   303844 
    Mon Jan 10 20:19:06 2000 /usr/local/lib/libggi-2-0-0.dll > 
    -rw-r--r--   1 kelem    Administ    
    93762 Sun Jan 09 17:56:40 2000 /usr/local/lib/libggi.a > 
    -rw-r--r--   1 kelem    
    Administ      704 Mon Jan 10 20:19:08 2000 
    /usr/local/lib/libggi.la > -rw-r--r--   1 
    kelem    Administ   215439 Mon Jan 10 20:25:06 2000 
    /usr/local/lib/libggimisc-2-0-0.dll > -rw-r--r--   1 
    kelem    Administ    30026 Sun Jan 09 17:56:56 
    2000 /usr/local/lib/libggimisc.a > -rw-r--r--   1 
    kelem    Administ      741 Mon Jan 
    10 20:25:06 2000 /usr/local/lib/libggimisc.la > > 
    /usr/local/lib/ggi: 
    John is right. Leave that the way John said.  but looking back at 
    your ls -l you are missing a lot of libs (dlls)? Where did you move 
    them? I didn't move them anywhere. As you can see, above, I 
  listed only the files that matched *ggi*. Here's a full listing. The byte 
  counts match your listing, except that mine are in /usr/local/lib, while yours 
  are in /usr/local/lib/ggi! I checked the file I downloaded from  http://pws.prserv.net/thefortins/ggi.tar.gz , 
  and it does unload the libs into usr/local/lib, not usr/local/lib/ggi.  
  Is there another environment variable that needs to be set to find the 
  library? I don't have LD_LIBRARY_PATH set.  Do I need to? 
  % ls -l /usr/local/lib/ total 874 drwxr-xr-x   6 
  kelem    Administ        0 
  Sun Jan 09 13:29:48 2000 ggi/ -rw-r--r--   1 
  kelem    Administ   235063 Sun Jan 09 18:04:22 2000 
  libgg-0-0-6.dll -rw-r--r--   1 kelem    
  Administ   235063 Sun Jan 09 18:04:20 2000 libgg-0-0-7.dll 
  -rw-r--r--   1 kelem    
  Administ    18932 Sun Jan 09 17:58:08 2000 libgg.a 
  -rw-r--r--   1 kelem    Administ   
  303844 Mon Jan 10 20:19:06 2000 libggi-2-0-0.dll -rw-r--r--   1 
  kelem    Administ    93762 Sun Jan 09 17:56:40 
  2000 libggi.a -rw-r--r--   1 kelem    
  Administ      704 Mon Jan 10 20:19:08 2000 libggi.la 
  -rw-r--r--   1 kelem    Administ   
  215439 Mon Jan 10 20:25:06 2000 libggimisc-2-0-0.dll 
  -rw-r--r--   1 kelem    
  Administ    30026 Sun Jan 09 17:56:56 2000 libggimisc.a 
  -rw-r--r--   1 kelem    
  Administ      741 Mon Jan 10 20:25:06 2000 
  libggimisc.la -rw-r--r--   1 kelem    
  Administ   252533 Sun Jan 09 18:07:02 2000 libgii-0-0-6.dll 
  -rw-r--r--   1 kelem    Administ   
  252533 Sun Jan 09 18:07:00 2000 libgii-0-0-7.dll -rw-r--r--   1 
  kelem    Administ    23082 Sun Jan 09 17:58:12 
  2000 libgii.a -rw-r--r--   1 kelem    
  Administ   113244 Fri Jan 21 17:01:34 2000 libintl.a 
  drwxr-xr-x   4 kelem    
  Administ        0 Sun Mar 12 16:43:32 2000 
  perl5/ 
  Here is my ls -l from /usr/local/lib/ggi 
    bash-2.02$ ls -l total 818 drwxr-xr-x   6 administ 
    Administ        0 Mar 20 13:52 ggi 
    -rw-r--r--   1 administ Administ   235063 Jan  
    9 21:04 libgg-0-0-6.dll -rw-r--r--   1 administ 
    Administ   235063 Jan  9 21:04 libgg-0-0-7.dll 
    -rw-r--r--   1 administ Administ    18932 
    Jan  9 20:58 libgg.a -rw-r--r--   1 administ 
    Administ   303844 Jan 10 23:19 libggi-2-0-0.dll 
    -rw-r--r--   1 administ Administ    93762 
    Jan  9 20:56 libggi.a -rw-r--r--   1 administ 
    Administ      704 Jan 10 23:19 libggi.la 
    -rw-r--r--   1 administ Administ   215439 Jan 10 
    23:25 libggimisc-2-0-0.dll -rw-r--r--   1 administ 
    Administ    30026 Jan  9 20:56 libggimisc.a 
    -rw-r--r--   1 administ Administ      
    741 Jan 10 23:25 libggimisc.la -rw-r--r--   1 administ 
    Administ   252533 Jan  9 21:06 libgii-0-0-6.dll 
    -rw-r--r--   1 administ Administ   252533 Jan  
    9 21:06 libgii-0-0-7.dll -rw-r--r--   1 administ 
    Administ    23082 Jan  9 20:58 libgii.a bash-2.02$ 
    > total 0 > drwxr-xr-x   2 kelem    
    Administ        0 Sun Jan 09 13:54:20 
    > 2000 default/ > drwxr-xr-x   2 
    kelem    Administ        0 
    Sun Jan 09 13:29:50 > 2000 display/ > drwxr-xr-x   2 
    kelem    Administ        0 
    Sun Jan 09 18:15:04 2000 filter/ > drwxr-xr-x   2 
    kelem    Administ        0 
    Sun Jan 09 18:08:14 2000 input/ > > Steve (about ready to 
    shell out the big bucks for Hummingbird) Kelem > > > Suhaib 
    > > > > > -----Original Message----- > > 
    > From: Steve Kelem [ mailto:kelem@adaptivesilicon.com ] 
    > > > Sent: Monday, March 27, 2000 1:20 PM > > > 
    To: Suhaib M. Siddiqi > > > Subject: Re: Can't run XGGI on 
    Cygwin 1.0 > > > > > > > > > 
    Yup.  Did that before I sent my message. The message I got > was 
    with that > > > version of libggi.conf.  See the 
    attachment. > > > > > > Steve > > > 
    > > > "Suhaib M. Siddiqi" wrote: > > > > 
    > > > > I followed the instructions on the page > > 
    > > > > > > > http://sourceware.cygnus.com/ml/cygwin-xfree/2000-q1/msg00056.html , 
    but > > > > > am not able to get XGGI to run.  When 
    I type > > > > > ./XGGI -targets directx & > 
    > > > > it replies: > > > > > % XGGI -targets 
    direct > > > > > > > > > > Fatal 
    server error: > > > > > Unable to init LibGGI! > 
    > > > > > > > > > % which XGGI > > 
    > > > //g/Cygwin/usr/X11R6/bin/XGGI > > > > > % 
    > > > > > > > > > > To clarify, in the 
    above-referenced web page, you say to > add the line: > > 
    > > > 
    directx                       
    display/directx.dll > > > > > > > > you MUST 
    add this line to the file msg00056.html is instructing.  if you 
    > > > > want to use > > > > > > 
    > > XGGI -targets direct > > > > > > > 
    > Suhaib > > > > > > > > > There was 
    already the following line in the file: > > > > > 
    display-directx                 
    display/directx.dll > > > > > > > > > 
    > Any idea what's wrong? > > > > > > > > 
    > > Help! > > > > > 
STeve