[PATCH] Copy/Paste non-ascii characters

Wed Oct 15 01:51:00 GMT 2003

Harold,

Before I embark on upgrading all of Cygwin to deal with this, is there any 
risk that stuff will break?  Since Cygwin underwent a major overhaul 
recently, it seems to me that there is a chance that some small parts of 
XFree86 stuff (I use little else) might be broken until all is brought up 
to speed.

Since this is a minute-to-minute critical application (X windowing) upon 
which we rely 100%, I have to be very careful about changes.  (Recalling 
recent RedHat library changes which broke lots of stuff and recent Perl 
version changes which wrecked our CGI scripts.)

What is the status? Does all the XFree86 stuff work under the new Cygwin? 
Is it "safe" now?  (I know that in the first few weeks it was not "safe".)

Jay

Harold L Hunt II said the following on 10/14/2003 09:23 PM:
> Jay,
> 
> Jay Smith wrote:
> 
>> Harold,
>>
>> a) Before I attempt this fix, will this work with my old version of 
>> everything else?  I know that Cygwin has moved ahead since April.  Or 
>> does installing this start me down a slippery slope...
> 
> 
> I hate when I forget to ask this if people are running the latest 
> version or not.  You really need to be running the latest versions in 
> order for us to properly debug and test things.
> 
> Yes, you will have to update to the 4.3.0 release of Cygwin/XFree86.  I 
> think I released it after April.  All of the DLLs have had their names 
> changed, so you need to get those (in the -bin package) but I believe I 
> made the fonts in such a way that they will not download again unless 
> you have a really old version.  You will basically need to get anything 
> that has a new version, since there have been updates to Cygwin's DLL, 
> various libraries, etc.
> 
>> b) Before I had the sense to ask the question above, I got as far as 
>> starting the download process from a mirror that I had previously 
>> used. The  setup program warned me that a newer setup.ini file would 
>> replace the old one, but did not seem to give me a way to cancel out.  
>> So, now I have an new setup.ini but old "everything else" files -- and 
>> I *do* need the "old everything else" to reinstall on PCs that die, 
>> etc.  Am I screwed?
> 
> 
> Setup gives a warning about setup.ini telling it that there is a new 
> version of setup.exe available and that you don't have it.  Download the 
> latest setup.exe and you won't get the warning (plus there has been a 
> lot of development on setup.exe in the last several months).
> 
> I'm not sure about the status of your installation images.  It sounds 
> like you have been doing a download to disk then installing from that? 
> Uh... guess all I can tell you is that you should have backed up first 
> :)  Of course, you could just look at files that have been updated 
> recently and check if setup.exe made a backup of the old setup.ini that 
> you had.
> 
> Harold
> 
> 
>> Jay
>>
>>
>> Harold L Hunt II said the following on 10/12/2003 11:01 PM:
>>
>>> Jay,
>>>
>>> I just posted XFree86-xserv-4.3.0-20 as a 'test' package; it should 
>>> be showing up on mirrors within a few hours.  When it does, run 
>>> setup.exe and manually select version '4.3.0-20' for the 
>>> XFree86-xserv package. Then, run the new server version as usual (do 
>>> not use the new flag that Kensuke talked about) and report your 
>>> results to the mailing list.
>>>
>>> Harold
>>>
>>> Jay Smith wrote:
>>>
>>>> Dear Kensuke,
>>>>
>>>> Thank you very much for your effort on this.
>>>>
>>>> Unfortunately, I am pretty ignorant of these matters, thus you will 
>>>> have to tell me what it is that I should do with the two .diff files 
>>>> you attached. I will be happy to do whatever with them, but I am 
>>>> clueless as to what is to be done with them.
>>>>
>>>> Sorry to be a pain.
>>>>
>>>> Jay
>>>>
>>>> Kensuke Matsuzaki said the following on 10/12/2003 09:33 PM:
>>>>
>>>>> Jay,
>>>>>
>>>>> Perhaps this patch enable XWin to copy/paste non-ascii characters
>>>>> even if Windows does't support Unicode (95/98/Me).
>>>>> LANG environment variable and Windows locale must be same.
>>>>> I added -nounicodeclipboard option, I tested using this on XP.
>>>>> But I don't have 95/98/Me.
>>>>>
>>>>> And it seems tha libX11 has some CTEXT convertion bug, I attach
>>>>> patch that based on TAKABE's work.
>>>>> http://www.ff.iij4u.or.jp/~t-takabe/xf410_xim_fix.diff
>>>>>
>>>>> By the way, nls/locale.alias has alias somethig like
>>>>> "Arabic_Egypt.1256". Can we use that?
>>>>> If so, we no longer need LANG environment variable.
>>>>> We can get it following code.
>>>>>
>>>>>   char pszCountry[128];
>>>>>   char pszLanguage[128];
>>>>>   int nAcp = GetACP ();
>>>>>     GetLocaleInfo (LOCALE_SYSTEM_DEFAULT, LOCALE_SENGCOUNTRY, 
>>>>> pszCountry, 128);
>>>>>   GetLocaleInfo (LOCALE_SYSTEM_DEFAULT, LOCALE_SENGLANGUAGE, 
>>>>> pszLanguage, 128);
>>>>>
>>>>>   printf ("%s_%s.%d\n", pszLanguage, pszCountry, nAcp);
>>>>>
>>>>> Kensuke Matsuzaki
>>>>
>>>>
>>>>
>>>>
>>>>
>>

-- 
Jay Smith

e-mail: Jay@JaySmith.com  mailto:Jay@JaySmith.com
website: http://www.JaySmith.com

Jay Smith & Associates
P.O. Box 650
Snow Camp, NC  27349  USA

Phone: Int+US+336-376-9991
Toll-Free Phone in US & Canada:
	1-800-447-8267
Fax: Int+US+336-376-6750