From kyle.sluder@gmail.com Sat Jul 1 04:02:00 2006 From: kyle.sluder@gmail.com (Kyle Sluder) Date: Sat, 01 Jul 2006 04:02:00 -0000 Subject: problem when starting the X server In-Reply-To: References: <5ADD7A851BF19D4F8C309F219231AB89102F7720@OCCLUST02EVS1.ugd.att.com> Message-ID: <4229fcad0606302102r43f3bebdyb6d3f42adf8f10f0@mail.gmail.com> It sounds like an Xauthority problem. Does the startxwin.bat file provided with Cygwin work properly? On 6/30/06, Ren? Berber wrote: > OVERBEY, ALFRED wrote: > > > I am having a problem starting the x-server, see snippet below. Would you be > > able to direct me to what needs to be configured or setup? > > Your server started fine but you probably have a firewall blocking all connections. > -- > Ren? Berber > > > -- > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > Problem reports: http://cygwin.com/problems.html > Documentation: http://x.cygwin.com/docs/ > FAQ: http://x.cygwin.com/docs/faq/ > > -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Sun Jul 2 20:26:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Sun, 02 Jul 2006 20:26:00 -0000 Subject: FW: xemacs freezes when latexing a file Message-ID: -----Original Message----- From: Yuval Grossman Sent: Sunday, July 02, 2006 3:49 PM To: The Cygwin ML Subject: xemacs freezes when latexing a file Hi, I am running xemacs (21.4.19) under cygwin/X (1.5.19.4). When I am in latex mode and I latex my file (C-c C-f) sometimes xemacs freezes. That is, I cannot edit the buffer, the cursor does not move, and I cannot close the window. All I could do is just to kill it. I can, however, minimize the window or move it around. Xemacs does not always hang, and I am unable to be able to predict when it will fail. All I can tell is that if it works well the first time, it does not fail later. That is, all the times it does fail it is in the first time I try to latex my file. I also tried to run other shell commands from inside xemacs (that is, with M-!), but they always work without a problem. I look in the cygwin mail archive, and found that a similar problem (not with latex, however) were discussed in 2002. The latest one I found was http://sourceware.org/ml/cygwin/2002-09/msg00521.html but it is not clear to my how the problem was solved. Any ideas how this problem can be fixed? Presumably, I just missed the post with the explanation. Thanks for any tips. Yuval This is a Cygwin/X problem. Please discuss this on that mailing list instead. Charli -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From yuvalg@physics.technion.ac.il Sun Jul 2 20:44:00 2006 From: yuvalg@physics.technion.ac.il (Yuval Grossman) Date: Sun, 02 Jul 2006 20:44:00 -0000 Subject: FW: xemacs freezes when latexing a file In-Reply-To: References: Message-ID: Hi, Thanks. I tested it now under cygwin and I had the same problem. That is, I did not start x and run latex directly from the cygwin window and I got the same problem. So maybe it is belong to the cygwin mailing list. Best, Yuval On Sun, 2 Jul 2006, Charli Li wrote: > -----Original Message----- > From: Yuval Grossman > Sent: Sunday, July 02, 2006 3:49 PM > To: The Cygwin ML > Subject: xemacs freezes when latexing a file > > > Hi, > > I am running xemacs (21.4.19) under cygwin/X (1.5.19.4). When I am in > latex mode and I latex my file (C-c C-f) sometimes xemacs freezes. That > is, I cannot edit the buffer, the cursor does not move, and I > cannot close the window. All I could do is just to kill it. I can, > however, minimize the window or move it around. Xemacs does not > always hang, and I am unable to be able to predict when it will > fail. All I can tell is that if it works well the first time, it does > not fail later. That is, all the times it does fail it is in the first > time I try to latex my file. I also tried to run other shell commands > from inside xemacs (that is, with M-!), but they always work without a > problem. > > I look in the cygwin mail archive, and found that a similar problem > (not with latex, however) were discussed in 2002. The latest one I > found was http://sourceware.org/ml/cygwin/2002-09/msg00521.html > but it is not clear to my how the problem was solved. Any ideas how > this problem can be fixed? Presumably, I just missed the post with the > explanation. > > Thanks for any tips. > > Yuval > > > > > This is a Cygwin/X problem. Please discuss this on that mailing list > instead. > > Charli > > > -- > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > Problem reports: http://cygwin.com/problems.html > Documentation: http://cygwin.com/docs.html > FAQ: http://cygwin.com/faq/ > > -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Sun Jul 2 21:01:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Sun, 02 Jul 2006 21:01:00 -0000 Subject: FW: xemacs freezes when latexing a file In-Reply-To: Message-ID: -----Original Message----- >From: Yuval Grossman >Sent: Sunday, July 02, 2006 4:44 PM >To: Cygwin Mailing List >Cc: Cygwin/X Mailing List >Subject: Re: FW: xemacs freezes when latexing a file > > >Hi, > >Thanks. I tested it now under cygwin and I had the same problem. That is, >I did not start x and run latex directly from the cygwin window and I got >the same problem. So maybe it is belong to the cygwin mailing list. > >Best, > Yuval > >On Sun, 2 Jul 2006, Charli Li wrote: > >> -----Original Message----- >> From: Yuval Grossman >> Sent: Sunday, July 02, 2006 3:49 PM >> To: The Cygwin ML >> Subject: xemacs freezes when latexing a file >> >> >> Hi, >> >> I am running xemacs (21.4.19) under cygwin/X (1.5.19.4). When I am in >> latex mode and I latex my file (C-c C-f) sometimes xemacs freezes. That >> is, I cannot edit the buffer, the cursor does not move, and I >> cannot close the window. All I could do is just to kill it. I can, >> however, minimize the window or move it around. Xemacs does not >> always hang, and I am unable to be able to predict when it will >> fail. All I can tell is that if it works well the first time, it does >> not fail later. That is, all the times it does fail it is in the first >> time I try to latex my file. I also tried to run other shell commands >> from inside xemacs (that is, with M-!), but they always work without a >> problem. >> >> I look in the cygwin mail archive, and found that a similar problem >> (not with latex, however) were discussed in 2002. The latest one I >> found was http://sourceware.org/ml/cygwin/2002-09/msg00521.html >> but it is not clear to my how the problem was solved. Any ideas how >> this problem can be fixed? Presumably, I just missed the post with the >> explanation. >> >> Thanks for any tips. >> >> Yuval >> >> >> >> >> This is a Cygwin/X problem. Please discuss this on that mailing list >> instead. >> >> Charli >> >> >> >> > ...and the XEmacs-news mailing list, perhaps? Charli -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Sun Jul 2 22:14:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Sun, 02 Jul 2006 22:14:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 There seems to be a problem with the new Cygwin1.dll version 1.5.20-1 made available by cgf in setup.exe. - --- First of all, the subject says it all. Please don't ask me to try a different startup method, since I have tried all three (startx, startxwin.sh, startxwin.bat) unsucessfully. Startup worked with Cygwin1.dll version 1.5.19-4, though. Charli -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (Cygwin) iD8DBQFEqEVsKGyf4JaPChgRAolYAJ46MpHB1DdwPeaY/ntjPf0ZD8XM9QCglUHi MAOcL3T9O26qqfnTwvuGIIE= =80nc -----END PGP SIGNATURE----- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From bobbymcn@bellsouth.net Sun Jul 2 23:08:00 2006 From: bobbymcn@bellsouth.net (Robert McNulty) Date: Sun, 02 Jul 2006 23:08:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 In-Reply-To: References: Message-ID: <44A851EB.7020504@bellsouth.net> Charli Li wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > There seems to be a problem with the new Cygwin1.dll version 1.5.20-1 made > available by cgf in setup.exe. > - --- > First of all, the subject says it all. Please don't ask me to try a > different startup method, since I have tried all three (startx, > startxwin.sh, startxwin.bat) unsucessfully. Startup worked with Cygwin1.dll > version 1.5.19-4, though. > > Charli > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.3 (Cygwin) > > iD8DBQFEqEVsKGyf4JaPChgRAolYAJ46MpHB1DdwPeaY/ntjPf0ZD8XM9QCglUHi > MAOcL3T9O26qqfnTwvuGIIE= > =80nc > -----END PGP SIGNATURE----- > > > -- > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > Problem reports: http://cygwin.com/problems.html > Documentation: http://x.cygwin.com/docs/ > FAQ: http://x.cygwin.com/docs/faq/ > > > > It works for me. Called up a bash prompt in an xterm. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ir0nh34d@gmail.com Mon Jul 3 02:16:00 2006 From: ir0nh34d@gmail.com (Chris Sutcliffe) Date: Mon, 03 Jul 2006 02:16:00 -0000 Subject: Keycodes and rxvt-unicode Message-ID: <2bf229d30607021916x6a8f2b7fxc8b90add48e4e93e@mail.gmail.com> I'm having a bit of a problem with urxvt and key-codes with vim. I have key-map setup such that Control-PageUp / PageDown switch between buffers (bp / bn). This key-mapping works fine under and xterm, but just rings the system bell under urxvt. The odd thing is that Ctrl and PageUp/PageDown work separately just fine, it's just when I try to use them together. Does anybody have any ideas? Thanx! Chris -- Chris Sutcliffe http://ir0nh34d.blogspot.com http://emergedesktop.org -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dickey@his.com Mon Jul 3 11:00:00 2006 From: dickey@his.com (Thomas Dickey) Date: Mon, 03 Jul 2006 11:00:00 -0000 Subject: Keycodes and rxvt-unicode In-Reply-To: <2bf229d30607021916x6a8f2b7fxc8b90add48e4e93e@mail.gmail.com> References: <2bf229d30607021916x6a8f2b7fxc8b90add48e4e93e@mail.gmail.com> Message-ID: <20060703065902.A74362@mail101.his.com> On Sun, 2 Jul 2006, Chris Sutcliffe wrote: > I'm having a bit of a problem with urxvt and key-codes with vim. I > have key-map setup such that Control-PageUp / PageDown switch between > buffers (bp / bn). This key-mapping works fine under and xterm, but > just rings the system bell under urxvt. The odd thing is that Ctrl > and PageUp/PageDown work separately just fine, it's just when I try to > use them together. rxvt (and derived things such as Eterm, aterm, wterm, urxvt) use a different escape sequence for modifiers with function-keys. -- Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From stephen@xemacs.org Mon Jul 3 11:30:00 2006 From: stephen@xemacs.org (Stephen J. Turnbull) Date: Mon, 03 Jul 2006 11:30:00 -0000 Subject: FW: xemacs freezes when latexing a file In-Reply-To: (Charli Li's message of "Sun, 2 Jul 2006 17:03:34 -0400") References: Message-ID: <8764if53jk.fsf@tleepslib.sk.tsukuba.ac.jp> Replies directed to xemacs-beta, cygwin/x, and cygwin mailing lists. I'm not sure that cygwin/x is relevant, but that's what charli suggested so I'm leaving it in for now. >>>>> "Charli" == Charli Li writes: >>> From: Yuval Grossman >>> I am running xemacs (21.4.19) under cygwin/X (1.5.19.4). When >>> I am in latex mode and I latex my file (C-c C-f) sometimes >>> xemacs freezes. That Are you sure that hitting C-g several times in succession doesn't work? This sounds like a process I/O issue. Since I have seen no other reports, the only things I can suggest are (a) try using a different version of the Cygwin dll, (b) since there's a pending change to process I/O, build XEmacs from CVS checked out with -rrelease-21-4 or wait for the release of 21.4.20 (downgrading XEmacs is unlikely to help, as the last changes to the process code are fairly ancient, you'd have to go back to at least 21.4.17, released 2006-02-06), or (c) run XEmacs under gdb, elicit the freeze, get a C backtrace at the point of the freeze, and send it to xemacs-beta. FWIW the "pending change to process I/O" is 2006-03-23 Tony Bennett * process-unix.c (unix_send_process): Reduce timeout for Faccept_process_output to 10ms. This dramatically speeds up many functions that read from processes, eg, inferior interpreter processes as in ilisp or python-mode. and the "most recent released change to process I/O" is 2005-02-03 David Evers * process-unix.c (unix_send_process): Flush the last chunk, even when the pipe is blocked. If the Cygwin build actually uses the process-nt.c code, then I have no idea what's going on---that code hasn't changed since 21.4.9 in mid-2002. Charli> ...and the XEmacs-news mailing list, perhaps? Please direct questions that clearly indicate a problem that could easily be an XEmacs bug to xemacs-beta@xemacs.org. Yuval may also want to post to the comp.emacs.xemacs newsgroup, as somebody there may know workarounds. It is unlikely that changes in areas as delicate as process I/O will be made in haste to the 21.4 line, especially since the experts on that are currently on vacation, so (if it's our bug) you're going to need to be patient. N.B. Despite the description of xemacs-news on the XEmacs Mailing Lists home page, the mail-news gateway has never worked well, and with nearly zero traffic, xemacs-news is going to be decomissioned next week, as announced several weeks ago. Regards, Stephen Turnbull stephen@xemacs.org -- School of Systems and Information Engineering http://turnbull.sk.tsukuba.ac.jp University of Tsukuba Tennodai 1-1-1 Tsukuba 305-8573 JAPAN Ask not how you can "do" free software business; ask what your business can "do for" free software. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ir0nh34d@gmail.com Mon Jul 3 12:09:00 2006 From: ir0nh34d@gmail.com (Chris Sutcliffe) Date: Mon, 03 Jul 2006 12:09:00 -0000 Subject: Keycodes and rxvt-unicode In-Reply-To: <20060703065902.A74362@mail101.his.com> References: <2bf229d30607021916x6a8f2b7fxc8b90add48e4e93e@mail.gmail.com> <20060703065902.A74362@mail101.his.com> Message-ID: <2bf229d30607030509s893c103hdae5011b3ca15c99@mail.gmail.com> > rxvt (and derived things such as Eterm, aterm, wterm, urxvt) use a > different escape sequence for modifiers with function-keys. Is it possible to determine what these escape sequences are? I assume once they are determined I should add them to my .inputrc? Chris -- Chris Sutcliffe http://ir0nh34d.blogspot.com http://emergedesktop.org -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dickey@his.com Mon Jul 3 12:17:00 2006 From: dickey@his.com (Thomas Dickey) Date: Mon, 03 Jul 2006 12:17:00 -0000 Subject: Keycodes and rxvt-unicode In-Reply-To: <2bf229d30607030509s893c103hdae5011b3ca15c99@mail.gmail.com> References: <2bf229d30607021916x6a8f2b7fxc8b90add48e4e93e@mail.gmail.com> <20060703065902.A74362@mail101.his.com> <2bf229d30607030509s893c103hdae5011b3ca15c99@mail.gmail.com> Message-ID: <20060703081358.D92170@mail101.his.com> On Mon, 3 Jul 2006, Chris Sutcliffe wrote: >> rxvt (and derived things such as Eterm, aterm, wterm, urxvt) use a >> different escape sequence for modifiers with function-keys. > > Is it possible to determine what these escape sequences are? I assume > once they are determined I should add them to my .inputrc? yes - they're documented (in rxvt's source, there's a doc or docs directory containing the file). I added some comments to terminfo.src in ncurses which covers much of that: ftp://invisible-island.net/ncurses/terminfo.src.gz Similarly, for xterm, the modifier encoding is documented in ctlseqs.ms (a corresponding ".txt" file is in my ftp area). Again, there's some coverage of it in terminfo.src -- Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ir0nh34d@gmail.com Mon Jul 3 12:54:00 2006 From: ir0nh34d@gmail.com (Chris Sutcliffe) Date: Mon, 03 Jul 2006 12:54:00 -0000 Subject: Keycodes and rxvt-unicode In-Reply-To: <20060703081358.D92170@mail101.his.com> References: <2bf229d30607021916x6a8f2b7fxc8b90add48e4e93e@mail.gmail.com> <20060703065902.A74362@mail101.his.com> <2bf229d30607030509s893c103hdae5011b3ca15c99@mail.gmail.com> <20060703081358.D92170@mail101.his.com> Message-ID: <2bf229d30607030554n3e8d9644ia48bd7d310a5cbed@mail.gmail.com> > yes - they're documented (in rxvt's source, there's a doc or docs > directory containing the file). I added some comments to terminfo.src in > ncurses which covers much of that: Thanx for providing that. I did some Googling and came up with this link: http://groups.yahoo.com/group/vim/message/66414 Using the 1 line c code listed there, I used it to determine the escape sequence for Ctrl-PageUp and Ctrl-PageDown and added the following to my .vimrc: nmap [5^ nmap [6^ nnoremap :bn! nnoremap :bp! and now everything works as expected. Cheers! Chris -- Chris Sutcliffe http://ir0nh34d.blogspot.com http://emergedesktop.org -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From edouard.bechetoille@ens-lyon.fr Mon Jul 3 15:20:00 2006 From: edouard.bechetoille@ens-lyon.fr (Ed Bech) Date: Mon, 03 Jul 2006 15:20:00 -0000 Subject: howto stop the beep in cygwin ?? References: <20060630055828.X59692@mail101.his.com> Message-ID: Thomas Dickey his.com> writes: > xterm's visibleBell resource (which is toggleable via the > control/left/mouse menu) does that. thanks a lot Thomas, I am now secured from beeing banned of my desk :) It is contol/middle click mouse/ with my cygwin and it works indeed ! Will I ask too much, if I ask you how to set it permanently in any config file ? And how to set permantly Enable Reverse Video mode ? thx. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From rafiq.ismail@abbey.com Mon Jul 3 15:30:00 2006 From: rafiq.ismail@abbey.com (Raf) Date: Mon, 03 Jul 2006 15:30:00 -0000 Subject: gnome desktop References: Message-ID: Hi Robert, Robert Wolf sears.ca> writes: > I noticed there is a 'gnome' package in cygwin. Is this a complete gnome > desktop that I can run locally? If so how to start it up? Unfortunately not. I've given up on getting gnome to work out of the box. If you search on sourceforge.net for cygnome, you'll find instructions which allow you to point your cygwin setup.exe at alternative archive. This contains various gnome components. I've found that inspite of the ease with which the installer builds most things, getting gnome to run is a real nightmare. I had to symlink various library_version.dll's to library.dll's in the /bin dir. This got it working to a point where my desktop seg-faulted and my own patience collapsed. I haven't actually seen many mortals with working cygnome implementations and, in answer to your question, simply including the 'gnome' stuff in the initial set-up doesn't do much more than load in a number of applications and gtk libraries. You "don't" get gnome-session. Once's you have managed to get it on your box, it's still hell to set-up. Don't give up, but do report your feed back. I for one would be interested. Cheers, Raf -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From lcaamano@gmail.com Mon Jul 3 20:07:00 2006 From: lcaamano@gmail.com (Luis P Caamano) Date: Mon, 03 Jul 2006 20:07:00 -0000 Subject: Updated: cygwin-1.5.20-1 In-Reply-To: <20060702161616.GA10851@coe.casa.cgf.cx> References: <20060702161616.GA10851@coe.casa.cgf.cx> Message-ID: Nice, many thanks! Just FYI, the gnome-terminal now doesn't complain about updwtmpx on first start but every now and then the gnome-pty-helper seems to hang gnome-terminal.exe when creating a new tab. It's not that bad though as it only seems to happen when opening several terminals at the same time and opening a tab on them quickly. On 7/2/06, Christopher Faylor wrote: > I've made a new version of the Cygwin DLL and associated utilities > available for download. As usual, a list of what has changed is below. > [ snip ] > > Changes since 1.5.19-4: > [ snip ] > > corinna: Implement updwtmpx. > [ snip ] > > cgf: Rework pty master handling to avoid handle leak (thanks to Dave Korn for > initial implementation). > -- Luis P Caamano Atlanta, GA USA -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dickey@his.com Mon Jul 3 20:09:00 2006 From: dickey@his.com (Thomas Dickey) Date: Mon, 03 Jul 2006 20:09:00 -0000 Subject: howto stop the beep in cygwin ?? In-Reply-To: References: <20060630055828.X59692@mail101.his.com> Message-ID: <20060703160438.B57766@mail101.his.com> On Mon, 3 Jul 2006, Ed Bech wrote: > Thomas Dickey his.com> writes: >> xterm's visibleBell resource (which is toggleable via the >> control/left/mouse menu) does that. > > thanks a lot Thomas, I am now secured from beeing banned of my desk :) > > It is contol/middle click mouse/ with my cygwin and it works indeed ! > Will I ask too much, if I ask you how to set it permanently in any config file ? > And how to set permantly Enable Reverse Video mode ? That's done in a resource file, e.g., $HOME/.Xdefaults Something like this might work for you: XTerm*VT100.visualBell: true XTerm*VT100.reverseVideo: true -- Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From edouard.bechetoille@ens-lyon.fr Tue Jul 4 09:36:00 2006 From: edouard.bechetoille@ens-lyon.fr (Ed Bech) Date: Tue, 04 Jul 2006 09:36:00 -0000 Subject: howto stop the beep in cygwin ?? References: <20060630055828.X59692@mail101.his.com> <20060703160438.B57766@mail101.his.com> Message-ID: > XTerm*VT100.visualBell: true Great, thx again a lot. > XTerm*VT100.reverseVideo: true Just a litle PB with the reverseVideo Mode, which became white when you move another xterm above it, kind of bug with redrawing of the background color. Such bug disappear with ( C-middle Enable Reverse Video ) x Twice. Anyhow, thanks for your tips, -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ingber@ingber.com Tue Jul 4 20:21:00 2006 From: ingber@ingber.com (Lester Ingber) Date: Tue, 04 Jul 2006 20:21:00 -0000 Subject: unixkill crashes under cygwin-1.5.20-1 Message-ID: <20060704202111.GA4340@ingber.com> Has anyone else noticed that unixkill crashes under cygwin-1.5.20-1? When I press CNTL-ALT-BKSP, I do not get a confirmation prompt, my X windows do close, but I get an XWin.exe.stackdump -file and after getting out of Cygwin CNTL-ALT-DEL shows som hanging tcsh processes (my primary shell). I start wy windows from a Cygwin window with XWin -notrayicon -unixkill -clipboard -multiwindow & in my modified /usr/local/bin/startxwin.sh file, also attached. I attach the log of the failed session and the crash file. Thanks. Lester -- Prof. Lester Ingber lester@ingber.com ingber@alumni.caltech.edu www.ingber.com alumnus.caltech.edu/~ingber -------------- next part -------------- Exception: STATUS_ACCESS_VIOLATION at eip=610DBE48 eax=00000000 ebx=00000014 ecx=00000005 edx=00000000 esi=0075CB7C edi=00000000 ebp=0022A680 esp=0022A674 program=C:\cygwin\usr\X11R6\bin\XWin.exe, pid 4108, thread main cs=001B ds=0023 es=0023 fs=003B gs=0000 ss=0023 Stack trace: Frame Function Args 0022A680 610DBE48 (00000000, 0075CB7C, 00000014, 0022A718) 0022A6C0 610F412C (0022D008, 0022C318, 0022C038, 00000001) 0022A6E0 610DF590 (0022C038, 0022AC86, 0075CB90, 00000001) 0022C300 610E0FAE (0022D008, 0022C318, 0075CB7C, 0022C3A4) 0022C390 610E34EF (00000000, 0075CB7C, 00000003, 000F042B) 0022C3C0 610916B8 (00250652, 00000110, 002A0686, 00A2B330) 0022C3EC 77D48734 (0044FB40, 00250652, 00000110, 002A0686) 0022C458 77D545E4 (00000000, 0044FB40, 00250652, 00000110) 0022C4A0 77D53FD9 (00000000, 00000110, 002A0686, 00A2B330) 0022C4BC 77D6E571 (00250652, 00000110, 002A0686, 00A2B330) 0022C4E8 77D48734 (77D6E54F, 00250652, 00000110, 002A0686) 0022C550 77D48816 (00000000, 77D6E54F, 00250652, 00000110) 0022C58C 77D4B89B (00C9E830, 40C92088, 002A0686, 00A2B330) 0022C644 77D54E28 (00000000, 40C9E830, 0000021C, 00250652) 0022C668 77D5514C (00400000, 007C8DDC, 0011067A, 0044FB40) 0022C694 77D6C7FD (00400000, 0075CB70, 0011067A, 0044FB40) End of stack trace (more stack frames may be present) -------------- next part -------------- [1] 2136 Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 6.8.2.0-4 Contact: cygwin-xfree@cygwin.com XWin was started with the following command line: XWin -notrayicon -unixkill -clipboard -multiwindow _XSERVTransmkdir: Cannot create /tmp/.X11-unix with root ownership winValidateArgs - g_iNumScreens: 1 iMaxConsecutiveScreen: 1 (II) XF86Config is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information (==) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" winPrefsLoadPreferences: /home/ingber/.XWinrc winDetectSupportedEngines - Windows NT/2000/XP winDetectSupportedEngines - DirectDraw installed winDetectSupportedEngines - DirectDraw4 installed winDetectSupportedEngines - Returning, supported engines 00000007 winSetEngine - Multi Window or Rootless => ShadowGDI winAdjustVideoModeShadowGDI - Using Windows display depth of 32 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1600 height: 1200 depth: 32 winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff winInitVisualsShadowGDI - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 bpp 32 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Hello winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000409" (00000409) (--) Using preset keyboard for "English (USA)" (409), type "4" Rules = "xorg" Model = "pc105" Layout = "us" Variant = "(null)" Options = "(null)" (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! winPointerWarpCursor - Discarding first warp: 800 600 winInitMultiWindowWM - pthread_mutex_lock () returned. winProcEstablishConnection - Hello winInitClipboard () winClipboardProc - Hello winProcEstablishConnection - winInitClipboard returned. DetectUnicodeSupport - Windows NT/2000/XP winMultiWindowXMsgProc - pthread_mutex_lock () returned. winInitMultiWindowWM - pthread_mutex_unlock () returned. winInitMultiWindowWM - DISPLAY=127.0.0.1:0.0 winMultiWindowXMsgProc - pthread_mutex_unlock () returned. winClipboardProc - DISPLAY=127.0.0.1:0.0 winMultiWindowXMsgProc - DISPLAY=127.0.0.1:0.0 winInitMultiWindowWM - XOpenDisplay () returned and successfully opened the display. winClipboardProc - XOpenDisplay () returned and successfully opened the display. winMultiWindowXMsgProc - XOpenDisplay () returned and successfully opened the display. winWindowProc - WM_*KEYDOWN - Closekey hit, quitting right: fatal IO error 104 (Connection reset by peer) or KillClient on X server "localhost:0.0" center: fatal IO error 104 (Connection reset by peer) or KillClient on X server "localhost:0.0" XIO: fatal IO error 104 (Connection reset by peer) on X server "localhost:0.0" after 68 requests (68 known processed) with 0 events remaining. -------------- next part -------------- A non-text attachment was scrubbed... Name: startxwinMW.sh Type: application/x-sh Size: 5234 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From corinna-cygwin@cygwin.com Tue Jul 4 20:36:00 2006 From: corinna-cygwin@cygwin.com (Corinna Vinschen) Date: Tue, 04 Jul 2006 20:36:00 -0000 Subject: unixkill crashes under cygwin-1.5.20-1 In-Reply-To: <20060704202111.GA4340@ingber.com> References: <20060704202111.GA4340@ingber.com> Message-ID: <20060704203630.GJ18873@calimero.vinschen.de> On Jul 4 13:21, Lester Ingber wrote: > Has anyone else noticed that unixkill crashes under cygwin-1.5.20-1? > When I press CNTL-ALT-BKSP, I do not get a confirmation prompt, my > X windows do close, but I get an XWin.exe.stackdump -file and after > getting out of Cygwin CNTL-ALT-DEL shows som hanging tcsh processes > (my primary shell). This is a bug in the confirmation dialog routine in the 6.8.2.0 X server. That's fixed in 6.8.99.901. Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Project Co-Leader cygwin AT cygwin DOT com Red Hat -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dickey@his.com Wed Jul 5 00:41:00 2006 From: dickey@his.com (Thomas Dickey) Date: Wed, 05 Jul 2006 00:41:00 -0000 Subject: howto stop the beep in cygwin ?? In-Reply-To: References: <20060630055828.X59692@mail101.his.com> <20060703160438.B57766@mail101.his.com> Message-ID: <20060704204017.W83181@mail101.his.com> On Tue, 4 Jul 2006, Ed Bech wrote: >> XTerm*VT100.visualBell: true > > Great, thx again a lot. > >> XTerm*VT100.reverseVideo: true > Just a litle PB with the reverseVideo Mode, which became white when you move > another xterm above it, kind of bug with redrawing of the background color. Such > bug disappear with ( C-middle Enable Reverse Video ) x Twice. I don't recall seeing that particular problem (what version of xterm are you using - "xterm -v")? -- Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From edouard.bechetoille@ens-lyon.fr Wed Jul 5 14:59:00 2006 From: edouard.bechetoille@ens-lyon.fr (Ed Bech) Date: Wed, 05 Jul 2006 14:59:00 -0000 Subject: howto stop the beep in cygwin ?? References: <20060630055828.X59692@mail101.his.com> <20060703160438.B57766@mail101.his.com> <20060704204017.W83181@mail101.his.com> Message-ID: > you using - "xterm -v")? I use : Cygwin 6.8.2.0(202) -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Wed Jul 5 17:29:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Wed, 05 Jul 2006 17:29:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 In-Reply-To: <44A851EB.7020504@bellsouth.net> Message-ID: Reformatted. -----Original Message----- >From: Robert McNulty >Sent: Sunday, July 02, 2006 7:08 PM >To: Cygwin/X Mailing List >Subject: Re: Cygwin/X does not start after updating Cygwin1.dll to >1.5.20-1 > > >Charli Li wrote: >> There seems to be a problem with the new Cygwin1.dll version >1.5.20-1 made >> available by cgf in setup.exe. >> - --- >> First of all, the subject says it all. Please don't ask me to try a >> different startup method, since I have tried all three (startx, >> startxwin.sh, startxwin.bat) unsucessfully. Startup worked with >Cygwin1.dll >> version 1.5.19-4, though. >> >> Charli > >It works for me. >Called up a bash prompt in an xterm. > > The error looks something like this (this is startx/startxwin.sh output; startxwin.bat doesn't output anything): 849 [main] ? (1920) X:\XXXXXXXXXX\cygwin\usr\X11R6\bin\xinit.exe: *** fatal error - proc magic mismatch detected - 0x704D1F7E/0xC87757A7. This problem is probably due to using incompatible versions of the Cygwin DLL. Search for Cygwin1.dll using the Windows Start->Find/Search utility and delete all but the most recent version. The most recent version *should* reside in x:\cygwin\bin, where 'x' is the drive on which you have installed the cygwin distribution. Rebooting is also suggested if you are unable to find another cygwin DLL. ...and similar error codes and the same message appear 5 more times. Is that telling me to downgrade back to 1.5.19-4 or what? Just because it feels that 1.5.20-1 is incompatible with X11? BTW, when is X11R7.1 is going to replace X11R6? It's so old that X.Org is letting it to rot (not X11R6.9)! Charli -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From cgf-no-personal-reply-please@cygwin.com Wed Jul 5 17:37:00 2006 From: cgf-no-personal-reply-please@cygwin.com (Christopher Faylor) Date: Wed, 05 Jul 2006 17:37:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 In-Reply-To: References: <44A851EB.7020504@bellsouth.net> Message-ID: <20060705173746.GA2288@trixie.casa.cgf.cx> On Wed, Jul 05, 2006 at 01:30:50PM -0400, Charli Li wrote: >Reformatted. >-----Original Message----- >>From: Robert McNulty >>Sent: Sunday, July 02, 2006 7:08 PM >>To: Cygwin/X Mailing List >>Subject: Re: Cygwin/X does not start after updating Cygwin1.dll to >>1.5.20-1 >> >> >>Charli Li wrote: >>> There seems to be a problem with the new Cygwin1.dll version >>1.5.20-1 made >>> available by cgf in setup.exe. >>> - --- >>> First of all, the subject says it all. Please don't ask me to try a >>> different startup method, since I have tried all three (startx, >>> startxwin.sh, startxwin.bat) unsucessfully. Startup worked with >>Cygwin1.dll >>> version 1.5.19-4, though. >>> >>> Charli >> >>It works for me. >>Called up a bash prompt in an xterm. >> > >The error looks something like this (this is startx/startxwin.sh output; >startxwin.bat doesn't output anything): > >849 [main] ? (1920) X:\XXXXXXXXXX\cygwin\usr\X11R6\bin\xinit.exe: *** fatal >error - proc magic mismatch detected - 0x704D1F7E/0xC87757A7. >This problem is probably due to using incompatible versions of the Cygwin >DLL. Search for Cygwin1.dll using the Windows Start->Find/Search utility >and delete all but the most recent version. The most recent version >*should* reside in x:\cygwin\bin, where 'x' is the drive on which you have >installed the cygwin distribution. Rebooting is also suggested if you are >unable to find another cygwin DLL. > >...and similar error codes and the same message appear 5 more times. Is >that telling me to downgrade back to 1.5.19-4 or what? Just because it >feels that 1.5.20-1 is incompatible with X11? No, it's telling you that the problem is due to using incompatible versions of cygwin1.dll. You should search for cygwin1.dll using the Windows Start->Find/Search utility and delete all but the most recent version. The most recent version *should* reside in x:\cygwin\bin, where 'x' is the drive on which you have installed the cygwin distribution. Rebooting is also suggested if you are unable to find another cygwin DLL. HTH. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Wed Jul 5 17:51:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Wed, 05 Jul 2006 17:51:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 In-Reply-To: <20060705173746.GA2288@trixie.casa.cgf.cx> Message-ID: -----Original Message----- >From: cgf >Sent: Wednesday, July 05, 2006 1:38 PM >To: Cygwin/X Mailing List >Subject: Re: Cygwin/X does not start after updating Cygwin1.dll to >1.5.20-1 > > >On Wed, Jul 05, 2006 at 01:30:50PM -0400, Charli Li wrote: >>Reformatted. >>-----Original Message----- >>>From: Robert McNulty >>>Sent: Sunday, July 02, 2006 7:08 PM >>>To: Cygwin/X Mailing List >>>Subject: Re: Cygwin/X does not start after updating Cygwin1.dll to >>>1.5.20-1 >>> >>> >>>Charli Li wrote: >>>> There seems to be a problem with the new Cygwin1.dll version >>>1.5.20-1 made >>>> available by cgf in setup.exe. >>>> - --- >>>> First of all, the subject says it all. Please don't ask me to try a >>>> different startup method, since I have tried all three (startx, >>>> startxwin.sh, startxwin.bat) unsucessfully. Startup worked with >>>Cygwin1.dll >>>> version 1.5.19-4, though. >>>> >>>> Charli >>> >>>It works for me. >>>Called up a bash prompt in an xterm. >>> >> >>The error looks something like this (this is startx/startxwin.sh output; >>startxwin.bat doesn't output anything): >> >>849 [main] ? (1920) X:\XXXXXXXXXX\cygwin\usr\X11R6\bin\xinit.exe: >*** fatal >>error - proc magic mismatch detected - 0x704D1F7E/0xC87757A7. >>This problem is probably due to using incompatible versions of the Cygwin >>DLL. Search for Cygwin1.dll using the Windows Start->Find/Search utility >>and delete all but the most recent version. The most recent version >>*should* reside in x:\cygwin\bin, where 'x' is the drive on which you have >>installed the cygwin distribution. Rebooting is also suggested if you are >>unable to find another cygwin DLL. >> >>...and similar error codes and the same message appear 5 more times. Is >>that telling me to downgrade back to 1.5.19-4 or what? Just because it >>feels that 1.5.20-1 is incompatible with X11? > >No, it's telling you that the problem is due to using incompatible >versions of cygwin1.dll. You should search for cygwin1.dll using the >Windows Start->Find/Search utility and delete all but the most recent >version. The most recent version *should* reside in x:\cygwin\bin, >where 'x' is the drive on which you have installed the cygwin >distribution. > >Rebooting is also suggested if you are unable to find another cygwin DLL. > >HTH. > Only one Cygwin1.dll is in X:\XXXXXXXXXX\cygwin\bin. 1.5.20-1 is the most recent version of Cygwin1.dll, and that was installed from a *GENUINE* copy of setup.exe. And I know that rebooting my Windows 2000 Professional SP4 box won't help. I did that a million times (simply shutting down the computer when I'm not using it, and then turning it on when I am) already. --- Had to downgrade to 1.5.19-4 for everything to go back to normal. Charli -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From cgf-no-personal-reply-please@cygwin.com Wed Jul 5 18:09:00 2006 From: cgf-no-personal-reply-please@cygwin.com (Christopher Faylor) Date: Wed, 05 Jul 2006 18:09:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 In-Reply-To: References: <20060705173746.GA2288@trixie.casa.cgf.cx> Message-ID: <20060705180914.GA3201@trixie.casa.cgf.cx> On Wed, Jul 05, 2006 at 01:53:37PM -0400, Charli Li wrote: >Had to downgrade to 1.5.19-4 for everything to go back to normal. Well, then, have fun living in the past. cgf -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Wed Jul 5 18:13:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Wed, 05 Jul 2006 18:13:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 In-Reply-To: References: Message-ID: <44AC0140.6080408@cygwin.com> Charli Li wrote: > -----Original Message----- >> From: cgf >> Sent: Wednesday, July 05, 2006 1:38 PM >> To: Cygwin/X Mailing List >> Subject: Re: Cygwin/X does not start after updating Cygwin1.dll to >> 1.5.20-1 >> >> >> On Wed, Jul 05, 2006 at 01:30:50PM -0400, Charli Li wrote: >>> Reformatted. >>> -----Original Message----- >>>> From: Robert McNulty >>>> Sent: Sunday, July 02, 2006 7:08 PM >>>> To: Cygwin/X Mailing List >>>> Subject: Re: Cygwin/X does not start after updating Cygwin1.dll to >>>> 1.5.20-1 >>>> >>>> >>>> Charli Li wrote: >>>>> There seems to be a problem with the new Cygwin1.dll version >>>> 1.5.20-1 made >>>>> available by cgf in setup.exe. >>>>> - --- >>>>> First of all, the subject says it all. Please don't ask me to try a >>>>> different startup method, since I have tried all three (startx, >>>>> startxwin.sh, startxwin.bat) unsucessfully. Startup worked with >>>> Cygwin1.dll >>>>> version 1.5.19-4, though. >>>>> >>>>> Charli >>>> It works for me. >>>> Called up a bash prompt in an xterm. >>>> >>> The error looks something like this (this is startx/startxwin.sh output; >>> startxwin.bat doesn't output anything): >>> >>> 849 [main] ? (1920) X:\XXXXXXXXXX\cygwin\usr\X11R6\bin\xinit.exe: >> *** fatal >>> error - proc magic mismatch detected - 0x704D1F7E/0xC87757A7. >>> This problem is probably due to using incompatible versions of the Cygwin >>> DLL. Search for Cygwin1.dll using the Windows Start->Find/Search utility >>> and delete all but the most recent version. The most recent version >>> *should* reside in x:\cygwin\bin, where 'x' is the drive on which you have >>> installed the cygwin distribution. Rebooting is also suggested if you are >>> unable to find another cygwin DLL. >>> >>> ...and similar error codes and the same message appear 5 more times. Is >>> that telling me to downgrade back to 1.5.19-4 or what? Just because it >>> feels that 1.5.20-1 is incompatible with X11? >> No, it's telling you that the problem is due to using incompatible >> versions of cygwin1.dll. You should search for cygwin1.dll using the >> Windows Start->Find/Search utility and delete all but the most recent >> version. The most recent version *should* reside in x:\cygwin\bin, >> where 'x' is the drive on which you have installed the cygwin >> distribution. >> >> Rebooting is also suggested if you are unable to find another cygwin DLL. >> >> HTH. >> > > Only one Cygwin1.dll is in X:\XXXXXXXXXX\cygwin\bin. 1.5.20-1 is the most > recent version of Cygwin1.dll, and that was installed from a *GENUINE* copy > of setup.exe. And I know that rebooting my Windows 2000 Professional SP4 > box won't help. I did that a million times (simply shutting down the > computer when I'm not using it, and then turning it on when I am) already. > --- > Had to downgrade to 1.5.19-4 for everything to go back to normal. So that means that you have a copy of cygwin1.dll *outside* the Cygwin path, as Chris suggested. If you can't find it for some reason, please read and follow the problem reporting guidelines outlined at: > Problem reports: http://cygwin.com/problems.html Pay particular attention to the request to *attach* (not append) your cygcheck output. Others here on the list might be able to help find your wayward copy if you haven't had any luck yourself (though if you can't find it by searching your whole disk, then something is really amiss on your machine). -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Bengt-Arne.Fjellner@ltu.se Wed Jul 5 20:02:00 2006 From: Bengt-Arne.Fjellner@ltu.se (Bengt-Arne Fjellner) Date: Wed, 05 Jul 2006 20:02:00 -0000 Subject: startxproblems after upgrade Message-ID: <1496.130.240.136.130.1152129731.squirrel@pinus.tt.luth.se> Hi after a major upgrade cywin-dll,bash,cygutils and a bunch more I've now got an interesting problem. when running startx cygwin belived that i didnt have a home directory. reason confusion about which "codepage" to use. Username Administrat??r has a swedish char ?? in it (o with umlaut) See output below $ set|grep Admini|grep -v PATH HOME=$'/home/Administrat\224r' LOGNAME=$'Administrat\366r' PWD=$'/home/Administrat\224r' USER=$'Administrat\366r' I have tried downgrading bash and cygwin but no luck. Everything works as it should in rxvt. any ideas?? Bengt-Arne Fjellner -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: cygcheck.txt URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Thu Jul 6 22:05:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Thu, 06 Jul 2006 22:05:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 In-Reply-To: <44AC0140.6080408@cygwin.com> Message-ID: -----Original Message----- >From: Larry Hall (Cygwin X) >Sent: Wednesday, July 05, 2006 2:13 PM >To: Cygwin/X Mailing List >Subject: Re: Cygwin/X does not start after updating Cygwin1.dll to >1.5.20-1 > > >Charli Li wrote: >> -----Original Message----- >>> From: cgf >>> Sent: Wednesday, July 05, 2006 1:38 PM >>> To: Cygwin/X Mailing List >>> Subject: Re: Cygwin/X does not start after updating Cygwin1.dll to >>> 1.5.20-1 >>> >>> >>> On Wed, Jul 05, 2006 at 01:30:50PM -0400, Charli Li wrote: >>>> Reformatted. >>>> -----Original Message----- >>>>> From: Robert McNulty >>>>> Sent: Sunday, July 02, 2006 7:08 PM >>>>> To: Cygwin/X Mailing List >>>>> Subject: Re: Cygwin/X does not start after updating Cygwin1.dll to >>>>> 1.5.20-1 >>>>> >>>>> >>>>> Charli Li wrote: >>>>>> There seems to be a problem with the new Cygwin1.dll version >>>>> 1.5.20-1 made >>>>>> available by cgf in setup.exe. >>>>>> - --- >>>>>> First of all, the subject says it all. Please don't ask me to try a >>>>>> different startup method, since I have tried all three (startx, >>>>>> startxwin.sh, startxwin.bat) unsucessfully. Startup worked with >>>>> Cygwin1.dll >>>>>> version 1.5.19-4, though. >>>>>> >>>>>> Charli >>>>> It works for me. >>>>> Called up a bash prompt in an xterm. >>>>> >>>> The error looks something like this (this is >startx/startxwin.sh output; >>>> startxwin.bat doesn't output anything): >>>> >>>> 849 [main] ? (1920) X:\XXXXXXXXXX\cygwin\usr\X11R6\bin\xinit.exe: >>> *** fatal >>>> error - proc magic mismatch detected - 0x704D1F7E/0xC87757A7. >>>> This problem is probably due to using incompatible versions of >the Cygwin >>>> DLL. Search for Cygwin1.dll using the Windows >Start->Find/Search utility >>>> and delete all but the most recent version. The most recent version >>>> *should* reside in x:\cygwin\bin, where 'x' is the drive on >which you have >>>> installed the cygwin distribution. Rebooting is also >suggested if you are >>>> unable to find another cygwin DLL. >>>> >>>> ...and similar error codes and the same message appear 5 more >times. Is >>>> that telling me to downgrade back to 1.5.19-4 or what? Just because it >>>> feels that 1.5.20-1 is incompatible with X11? >>> No, it's telling you that the problem is due to using incompatible >>> versions of cygwin1.dll. You should search for cygwin1.dll using the >>> Windows Start->Find/Search utility and delete all but the most recent >>> version. The most recent version *should* reside in x:\cygwin\bin, >>> where 'x' is the drive on which you have installed the cygwin >>> distribution. >>> >>> Rebooting is also suggested if you are unable to find another >cygwin DLL. >>> >>> HTH. >>> >> >> Only one Cygwin1.dll is in X:\XXXXXXXXXX\cygwin\bin. 1.5.20-1 >is the most >> recent version of Cygwin1.dll, and that was installed from a >*GENUINE* copy >> of setup.exe. And I know that rebooting my Windows 2000 Professional SP4 >> box won't help. I did that a million times (simply shutting down the >> computer when I'm not using it, and then turning it on when I >am) already. >> --- >> Had to downgrade to 1.5.19-4 for everything to go back to normal. > > >So that means that you have a copy of cygwin1.dll *outside* the >Cygwin path, >as Chris suggested. If you can't find it for some reason, please read and >follow the problem reporting guidelines outlined at: > >> Problem reports: http://cygwin.com/problems.html > > >Pay particular attention to the request to *attach* (not append) >your cygcheck >output. Others here on the list might be able to help find your >wayward copy >if you haven't had any luck yourself (though if you can't find it >by searching >your whole disk, then something is really amiss on your machine). > > >-- >Larry Hall http://www.rfk.com >RFK Partners, Inc. (508) 893-9779 - RFK Office >216 Dalton Rd. (508) 893-9889 - FAX >Holliston, MA 01746 > Searching Local Harddrives (C:;D:)... Cygwin1.dll found in D:\XXXXXXXXXX\cygwin\bin Cygwin1.dll found in D:\XXXXXXXXXX\cygwin\usr\X11R6\bin Select an item to view its description. Both of these dirs are in $PATH. So, here we are at the xterm: (cl@xxxxxxxxxx)[27] ~ $ ...and we check the $PATH: (cl@xxxxxxxxxx)[27] ~ $ cat $PATH cat: /usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:./:/cygdrive/d/xxxxxxxxxx/pfiles /Microsoft Visual Studio/Common7/IDE:/cygdrive/d/xxxxxxxxxx/pfiles/Microsoft Visual Studio/VC/bin:/cygdrive/d/xxxxxxxxxx/pfiles/Microsoft Visual Studio/Common7/tools File name too long That was only a snippet of what I had in my $PATH. So this may mean that somehow, Cygwin1.dll may have been COPIED into the /usr/X11R6/bin dir. Does setup.exe have that behaviour to do that? Charli -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From lcaamano@gmail.com Fri Jul 7 00:53:00 2006 From: lcaamano@gmail.com (Luis P Caamano) Date: Fri, 07 Jul 2006 00:53:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 Message-ID: Just FYI. I'm running 1.5.20-1, X starts fine and I'm gladly running several gnome-terminals with no problems. I also run sshd and httpd2. -- Luis P Caamano Atlanta, GA USA -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Fri Jul 7 02:19:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Fri, 07 Jul 2006 02:19:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 In-Reply-To: References: Message-ID: <44ADC48B.8040509@cygwin.com> Charli Li wrote: > > Searching Local Harddrives (C:;D:)... > Cygwin1.dll found in D:\XXXXXXXXXX\cygwin\bin > Cygwin1.dll found in D:\XXXXXXXXXX\cygwin\usr\X11R6\bin > Select an item to view its description. > > Both of these dirs are in $PATH. So, here we are at the xterm: > > (cl@xxxxxxxxxx)[27] ~ > $ > > ...and we check the $PATH: > > (cl@xxxxxxxxxx)[27] ~ > $ cat $PATH > cat: > /usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:./:/cygdrive/d/xxxxxxxxxx/pfiles > /Microsoft Visual Studio/Common7/IDE:/cygdrive/d/xxxxxxxxxx/pfiles/Microsoft > Visual Studio/VC/bin:/cygdrive/d/xxxxxxxxxx/pfiles/Microsoft Visual > Studio/Common7/tools File name too long > > That was only a snippet of what I had in my $PATH. So this may mean that > somehow, Cygwin1.dll may have been COPIED into the /usr/X11R6/bin dir. Does > setup.exe have that behaviour to do that? > No, setup.exe won't do that. It must have gotten there through other means. Delete the one in /usr/X11R6/bin. If you have further difficulties that you wish to contact the list about, please read and follow the problem reporting guidelines found here: Problem reports: http://cygwin.com/problems.html Also, if any further problem you experience is not Cygwin-X specific, the general Cygwin list will get you more exposure. -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From john@redux.org.uk Fri Jul 7 20:15:00 2006 From: john@redux.org.uk (John Beranek) Date: Fri, 07 Jul 2006 20:15:00 -0000 Subject: "United Kingdom Extended" keyboard layout Message-ID: I noticed that the latest Cygwin/X doesn't recognise the "United Kingdom Extended" keyboard layout, so if you do happen to use this keyboard layout on XP, you end up with a US layout unless you modify your X startup script to set the keymap to 'gb'. So, as the FAQ suggests, I'm sending an email to the list... (--) winConfigKeyboard - Layout: "00000452" (00000452) (EE) Keyboardlayout "United Kingdom Extended" (00000452) is unknown Layout code is generally 'gb', if I understand the terminology correctly, but what it adds is deadkeys on `, and AltGr-"^'~, plus a few more AltGr combinations. See: http://www.microsoft.com/globaldev/keyboards/kbdukx.htm That's all, John. -- John Beranek To generalise is to be an idiot. http://redux.org.uk/ -- William Blake -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From mahesh.kumaraguru@lehman.com Fri Jul 7 21:18:00 2006 From: mahesh.kumaraguru@lehman.com (Kumaraguru, Mahesh) Date: Fri, 07 Jul 2006 21:18:00 -0000 Subject: Error message Message-ID: <3634BB178955614594809EA5505A0EBC0267AA49@njpcmg1exms317.leh.lbcorp.lehman.com> > Hi > > I got the following error message when trying to use cygwin > ------------------------------------------------------------------------ ----- A fatal error has occurred and Cygwin/X will now exit. Please open /tmp/XWin.log for more information. Vendor: The Cygwin/X Project Release; 6.8.2.0-4 Contact: cygwin-xfree@cygwin.com XWin was started with the following command-line: X :0 -multiwindow -clipboard ------------------------------------------------------------------------ ----- > The contents of file /tmp/Xwin.log is > ---------------------------------------------------------------------- > ------- > > Welcome to the XWin X Server > Vendor: The Cygwin/X Project > Release: 6.8.2.0-4 > > XWin was started with the following command line: > > X :5 > > ddxProcessArgument - Initializing default screens > winInitializeDefaultScreens - w 1280 h 1024 > winInitializeDefaultScreens - Returning > Welcome to the XWin X Server > Vendor: The Cygwin/X Project > Release: 6.8.2.0-4 > > Contact: cygwin-xfree@cygwin.com > > XWin was started with the following command line: > > X :5 > > ddxProcessArgument - Initializing default screens > winInitializeDefaultScreens - w 1280 h 1024 > winInitializeDefaultScreens - Returning > (WW) /tmp mounted int textmode > _XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root > (II) XF86Config is not supported > (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more > information > (==) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TT > F/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/ > X11R6/lib/ > X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > MIT-SHM extension disabled due to lack of kernel support > XFree86-Bigfont extension local-client optimization disabled due to > lack of shar > ed memory support in the kernel > (--) Setting autorepeat to delay=500, rate=31 > (--) winConfigKeyboard - Layout: "00000409" (00000409) > (--) Using preset keyboard for "English (USA)" (409), type "4" > (--) 3 mouse buttons found > Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, > removing from li > st! > winProcEstablishConnection - Hello > winProcEstablishConnection - Clipboard is not enabled, returning. > AUDIT: Tue Mar 28 14:42:37 2006: 1920 X: client 3 rejected from IP > 10.12.30.191 > AUDIT: Tue Mar 28 14:42:38 2006: 1920 X: client 3 rejected from IP > 10.12.30.191 > AUDIT: Tue Mar 28 14:42:39 2006: 1920 X: client 3 rejected from IP > 10.12.30.191 > (WW) /tmp mounted int textmode > (II) XF86Config is not supported > (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more > information > (==) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TT > F/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/ > X11R6/lib/ > X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > MIT-SHM extension disabled due to lack of kernel support > XFree86-Bigfont extension local-client optimization disabled due to > lack of shar > ed memory support in the kernel > (--) Setting autorepeat to delay=500, rate=31 > (--) winConfigKeyboard - Layout: "00000409" (00000409) > (--) Using preset keyboard for "English (USA)" (409), type "4" > (--) 3 mouse buttons found > Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, > removing from li > st! > winDeinitMultiWindowWM - Noting shutdown in progress > ~ > ~ > ------------------------------------------------------------------------ --------------- Please let me know how I can fix this error. > Regards, > K. Mahesh > > 1-212-320-7622 > > mahesh.kumaraguru@lehman.com > > ------------------------------------------------------------------------------ This message is intended only for the personal and confidential use of the designated recipient(s) named above. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and should not be regarded as an offer to sell or as a solicitation of an offer to buy any financial product, an official confirmation of any transaction, or as an official statement of Lehman Brothers. Email transmission cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. ---------- IRS Circular 230 Disclosure: Please be advised that any discussion of U.S. tax matters contained within this communication (including any attachments) is not intended or written to be used and cannot be used for the purpose of (i) avoiding U.S. tax related penalties or (ii) promoting, marketing or recommending to another party any transaction or matter addressed herein. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ingber@ingber.com Sat Jul 8 15:32:00 2006 From: ingber@ingber.com (Lester Ingber) Date: Sat, 08 Jul 2006 15:32:00 -0000 Subject: unixkill crashes under cygwin-1.5.20-1 (and cygwin1dll-20060707) Message-ID: <20060708153201.GA1476@ingber.com> Corinna: I don't understand why I do not have any such crashes under cygwin1dll-1.5.19, but only with cygwin1dll-1.5.20-1 and the latest snapshot cygwin1dll-20060707? I attach the output of cygcheck -s -v -r > cygcheck.out which I took with cygwin1dll-1.5.19. Thanks. Lester +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+= Date: Tue, 4 Jul 2006 22:36:30 +0200 On Jul 4 13:21, Lester Ingber wrote: > Has anyone else noticed that unixkill crashes under cygwin-1.5.20-1? > When I press CNTL-ALT-BKSP, I do not get a confirmation prompt, my > X windows do close, but I get an XWin.exe.stackdump -file and after > getting out of Cygwin CNTL-ALT-DEL shows som hanging tcsh processes > (my primary shell). This is a bug in the confirmation dialog routine in the 6.8.2.0 X server. That's fixed in 6.8.99.901. Corinna -------------- next part -------------- Cygwin Configuration Diagnostics Current System Time: Sat Jul 08 08:26:15 2006 Windows XP Professional Ver 5.1 Build 2600 Service Pack 2 Path: C:\cygwin\usr\local\bin C:\cygwin\bin C:\cygwin\bin C:\cygwin\usr\local\bin C:\cygwin\bin C:\cygwin\bin C:\cygwin\usr\X11R6\bin c:\WINDOWS\system32 c:\WINDOWS c:\WINDOWS\System32\Wbem c:\windows\system32\ c:\PROGRAM FILES\THINKPAD\UTILITIES c:\Program Files\ATI Technologies\ATI Control Panel c:\Program Files\Belkin\Belkin Wireless Utility\Unicows c:\Program Files\ATI Technologies\Fire GL 3D Studio Max c:\MATLAB7\bin\win32 c:\Program Files\Microsoft Visual Studio\Common\Tools\WinNT c:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin c:\Program Files\Microsoft Visual Studio\Common\Tools c:\Program Files\Microsoft Visual Studio\VC98\bin C:\cygwin\lib\lapack C:\cygwin\home\ingber\.local\bin C:\cygwin\home\ingber\.local\bin\MACS C:\cygwin\usr\local\rdb C:\cygwin\home\ingber\.local\bin\PERLS .\ C:\cygwin\home\ingber\.local\bin C:\cygwin\home\ingber\.local\bin\MACS C:\cygwin\usr\local\rdb C:\cygwin\home\ingber\.local\bin\PERLS .\ Output from C:\cygwin\bin\id.exe (nontsec) UID: 1005(ingber) GID: 513(None) 0(root) 513(None) 544(Administrators) 545(Users) Output from C:\cygwin\bin\id.exe (ntsec) UID: 1005(ingber) GID: 513(None) 0(root) 513(None) 544(Administrators) 545(Users) SysDir: C:\WINDOWS\system32 WinDir: C:\WINDOWS USER = 'ingber' PWD = '/home/ingber' HOME = '/home/ingber' MAKE_MODE = 'unix' HOMEPATH = '\Documents and Settings\ingber' MANPATH = ':/usr/ssl/man:/usr/share/qt3/doc/man:/usr/X11R6/man:/usr/X11R6/man:/usr/man:/usr/local/man:/home/ingber/.local/man:/usr/local/netpbm/man:/usr/ssl/man:/usr/share/qt3/doc/man:/usr/X11R6/man:/usr/X11R6/man:/usr/man:/usr/local/man:/home/ingber/.local/man:/usr/local/netpbm/man' APPDATA = 'C:\Documents and Settings\ingber\Application Data' SSH_AGENT_PID = '3044' ORGANIZATION = 'Lester Ingber Research' HOST = 'lester' TERM = 'xterm' PROCESSOR_IDENTIFIER = 'x86 Family 15 Model 2 Stepping 4, GenuineIntel' WINDIR = 'C:\WINDOWS' TMPDIR = '/tmp' BINDIR = '/usr/local/bin' PGPPATH = '/home/ingber/.pgp' CVSROOT = '/usr/local/src/CVS_REPOSITORY' QTDIR = '/usr/lib/qt3' USERDOMAIN = 'LESTER' OS = 'Windows_NT' ALLUSERSPROFILE = 'C:\Documents and Settings\All Users' TMAKEPATH = '/usr/local/tmake/lib/cygwin-g++' XAPPLRESDIR = '/usr/X11R6/lib/X11/app-defaults' XCMSDB = '/usr/X11R6/lib/X11/Xcms.txt' GROUP = 'None' !:: = '::\' LS_COLORS = 'no=00:fi=00;34:di=01;32:ln=00;35:pi=35;33:so=00;35:bd=35;33;01:cd=35;33;01:or=40;31;01:ex=00;31:*.tar=00;36:*.tgz=01;34:*.arj=01;36:*.taz=01;34:*.lzh=01;34:*.zip=01;34:*.z=01;34:*.Z=01;34:*.gz=01;34:*.deb=00;31:*.jpg=01;36:*.gif=01;36:*.bmp=01;36:*.ppm=01;36:*.tga=01;36:*.xbm=01;36:*.xpm=01;36:*.tif=01;36:*.mpg=01;36:*.html=01;36:*.htm=01;36:*.avi=01;36:*.gl=01;36:*.dl=01;36:' COMMONPROGRAMFILES = 'C:\Program Files\Common Files' XNLSPATH = '/usr/X11R6/lib/X11/locale' LIB = 'C:\Program Files\Microsoft Visual Studio\VC98\mfc\lib;C:\Program Files\Microsoft Visual Studio\VC98\lib' SSH_AUTH_SOCK = '/tmp/ssh-4KFJLj6e5Y/agent.3476' HOSTTYPE = 'i386' MAXIMA_PREFIX = '/cygdrive/c/ProgramFiles/Maxima-5.9.3/' USERNAME = 'ingber' PAGER = 'less -c -n -s -M' PROCESSOR_LEVEL = '15' MAIL = '/home/ingber/.mailbox/inbox' REPLYTO = 'Lester Ingber ' MANPATH3 = '/usr/local/netpbm/man' FP_NO_HOST_CHECK = 'NO' MANPATH2 = '/usr/local/man:/home/ingber/.local/man' SYSTEMDRIVE = 'C:' MANPATH1 = '/usr/X11R6/man:/usr/man' EDITOR = 'vim' ISPELL_DICTIONARY = '/usr/local/lib/ispell/ispell.dict' USERPROFILE = 'C:\Documents and Settings\ingber' JFDIR = '/home/ingber/.procmail/junkfilter' TZ = 'PST8PDT' QMAKESPEC = '/usr/lib/qt3/mkspecs/cygwin-g++' LYNX_CFG = '/home/ingber/.lynx.cfg' LOGONSERVER = '\\LESTER' PROCESSOR_ARCHITECTURE = 'x86' !C: = 'C:\cygwin\bin' MAPLE = '/usr/local/maple' ISPELL_WORDS = '/usr/local/lib/ispell/ispell.words' COLORFGBG = 'lightgray;blue' SHLVL = '1' OSTYPE = 'posix' PATHEXT = '.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH' GNUSTEP_USER_ROOT = '/home/ingber/.GNUstep' HOMEDRIVE = 'C:' VENDOR = 'intel' PROMPT = '$P$G' COMSPEC = 'C:\WINDOWS\system32\cmd.exe' LESS = '-c -n -s -M' LOGNAME = 'ingber' MACHTYPE = 'i386' SYSTEMROOT = 'C:\WINDOWS' PROCESSOR_REVISION = '0204' CLASSPATH = '.;' MSDEVDIR = 'C:\Program Files\Microsoft Visual Studio\Common\MSDev98' LESSOPEN = '|lesspipe %s' PKG_CONFIG_PATH = '/usr/X11R6/lib/pkgconfig' MBOX = '/home/ingber/.mailbox/inbox' INFOPATH = '.:/usr/info:/usr/share/info:/usr/local/info:/home/ingber/.local/info' PROGRAMFILES = 'C:\Program Files' DISPLAY = 'localhost:0.0' NUMBER_OF_PROCESSORS = '1' INCLUDE = 'C:\Program Files\Microsoft Visual Studio\VC98\atl\include;C:\Program Files\Microsoft Visual Studio\VC98\mfc\include;C:\Program Files\Microsoft Visual Studio\VC98\include' SESSIONNAME = 'Console' COMPUTERNAME = 'LESTER' _ = '/usr/bin/xterm' WINDOWID = '6291470' XTERM_VERSION = 'Cygwin 6.8.2.0(202)' TERMCAP = 'xterm-r6|xterm|xterm X11R6 version:am:km:mi:ms:xn:co#80:it#8:li#84:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:im=\E[4h:is=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:ue=\E[m:up=\E[A:us=\E[4m:kb=\010:' XTERM_SHELL = '/bin/tcsh' REMOTEHOST = 'lester.ingber.com' TEMP = 'c:/cygwin/tmp' TMP = '/tmp' POSIXLY_CORRECT = '1' HKEY_CURRENT_USER\Software\Cygnus Solutions HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2 HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin (default) = 0x00000400 HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2 (default) = '/cygdrive' cygdrive flags = 0x0000002a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/ (default) = 'C:\cygwin' flags = 0x0000000a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/bin (default) = 'C:\cygwin/bin' flags = 0x0000000a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/lib (default) = 'C:\cygwin/lib' flags = 0x0000000a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/X11R6/lib/X11/fonts (default) = 'C:\cygwin\usr\X11R6\lib\X11\fonts' flags = 0x0000000a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Program Options c: hd NTFS 55902Mb 48% CP CS UN PA FC LESTER_C d: cd N/A N/A e: hd NTFS 76316Mb 61% CP CS UN PA FC LESTER_E y: net N/A N/A C:\cygwin / system binmode C:\cygwin/bin /usr/bin system binmode C:\cygwin/lib /usr/lib system binmode C:\cygwin\usr\X11R6\lib\X11\fonts /usr/X11R6/lib/X11/fonts system binmode . /cygdrive system binmode,cygdrive Found: C:\cygwin\bin\awk.exe Found: C:\cygwin\bin\bash.exe Found: C:\cygwin\bin\cat.exe Found: C:\cygwin\bin\cp.exe Found: C:\cygwin\bin\cpp.exe Found: C:\cygwin\bin\crontab.exe Found: C:\cygwin\bin\find.exe Found: C:\cygwin\bin\gcc.exe Found: C:\cygwin\bin\gdb.exe Found: C:\cygwin\bin\grep.exe Found: C:\cygwin\bin\kill.exe Found: C:\cygwin\bin\ld.exe Found: C:\cygwin\bin\ls.exe Found: C:\cygwin\bin\make.exe Found: C:\cygwin\bin\mv.exe Found: C:\cygwin\bin\patch.exe Found: C:\cygwin\bin\perl.exe Found: C:\cygwin\bin\rm.exe Found: C:\cygwin\bin\sed.exe Found: C:\cygwin\bin\ssh.exe Found: C:\cygwin\bin\sh.exe Found: C:\cygwin\bin\tar.exe Found: C:\cygwin\bin\test.exe Not Found: vi Found: C:\cygwin\bin\vim.exe 80k 2006/02/20 C:\cygwin\bin\cygaa-1.dll - os=4.0 img=1.0 sys=4.0 "cygaa-1.dll" v0.0 ts=2006/2/20 13:16 25k 2005/08/15 C:\cygwin\bin\cygao-2.dll - os=4.0 img=1.0 sys=4.0 "cygao-2.dll" v0.0 ts=2005/8/15 2:22 91k 2005/11/11 C:\cygwin\bin\cygapr-0-0.dll - os=4.0 img=1.0 sys=4.0 "cygapr-0-0.dll" v0.0 ts=2005/11/11 7:03 103k 2006/06/05 C:\cygwin\bin\cygapr-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygapr-1-0.dll" v0.0 ts=2006/6/5 9:25 67k 2005/11/11 C:\cygwin\bin\cygaprutil-0-0.dll - os=4.0 img=1.0 sys=4.0 "cygaprutil-0-0.dll" v0.0 ts=2005/11/11 8:55 70k 2006/06/05 C:\cygwin\bin\cygaprutil-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygaprutil-1-0.dll" v0.0 ts=2006/6/5 15:06 52k 2005/11/10 C:\cygwin\bin\cygart_lgpl-2.dll - os=4.0 img=1.0 sys=4.0 "cygart_lgpl-2.dll" v0.0 ts=2005/11/10 12:33 76k 2005/07/30 C:\cygwin\bin\cygart_lgpl_2-2.dll - os=4.0 img=1.0 sys=4.0 "cygart_lgpl_2-2.dll" v0.0 ts=2005/7/30 3:46 802k 2003/09/15 C:\cygwin\bin\cygaspell-15.dll - os=4.0 img=1.0 sys=4.0 "cygaspell-15.dll" v0.0 ts=2003/9/15 5:32 113k 2005/07/16 C:\cygwin\bin\cygatk-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygatk-1.0-0.dll" v0.0 ts=2005/7/15 12:37 145k 2004/09/02 C:\cygwin\bin\cygaudiofile-0.dll - os=4.0 img=1.0 sys=4.0 "cygaudiofile-0.dll" v0.0 ts=2004/9/1 20:38 326k 2005/09/28 C:\cygwin\bin\cygbonobo-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygbonobo-2-0.dll" v0.0 ts=2005/9/28 13:27 67k 2005/09/28 C:\cygwin\bin\cygbonobo-activation-4.dll - os=4.0 img=1.0 sys=4.0 "cygbonobo-activation-4.dll" v0.0 ts=2005/9/28 12:35 334k 2005/09/27 C:\cygwin\bin\cygbonoboui-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygbonoboui-2-0.dll" v0.0 ts=2005/9/27 14:26 56k 2005/07/09 C:\cygwin\bin\cygbz2-1.dll - os=4.0 img=1.0 sys=4.0 "cygbz2-1.dll" v0.0 ts=2005/7/8 22:09 54k 2002/01/27 C:\cygwin\bin\cygbz21.0.dll - os=4.0 img=1.0 sys=4.0 "cygbz21.0.dll" v0.0 ts=2002/1/26 17:07 317k 2005/10/07 C:\cygwin\bin\cygcairo-2.dll - os=4.0 img=1.0 sys=4.0 "cygcairo-2.dll" v0.0 ts=2005/10/7 14:49 7k 2005/11/20 C:\cygwin\bin\cygcharset-1.dll - os=4.0 img=1.0 sys=4.0 "cygcharset-1.dll" v0.0 ts=2005/11/19 18:24 255k 2006/05/01 C:\cygwin\bin\cygclamav-1.dll - os=4.0 img=1.0 sys=4.0 "cygclamav-1.dll" v0.0 ts=2006/4/30 5:50 16k 2005/10/11 C:\cygwin\bin\cygcompface-0.dll - os=4.0 img=1.0 sys=4.0 "cygcompface-0.dll" v0.0 ts=2005/10/11 6:58 529k 2004/06/27 C:\cygwin\bin\cygcppunit-1-9-14.dll - os=4.0 img=1.0 sys=4.0 "cygcppunit-1-9-14.dll" v0.0 ts=2004/6/26 18:29 260k 2004/10/26 C:\cygwin\bin\cygcroco-0.6-3.dll - os=4.0 img=1.0 sys=4.0 "cygcroco-0.6-3.dll" v0.0 ts=2004/10/26 15:09 7k 2003/10/19 C:\cygwin\bin\cygcrypt-0.dll - os=4.0 img=1.0 sys=4.0 "cygcrypt-0.dll" v0.0 ts=2003/10/19 0:57 1108k 2006/06/01 C:\cygwin\bin\cygcrypto-0.9.7.dll - os=4.0 img=1.0 sys=4.0 "cygcrypto-0.9.7.dll" v0.0 ts=2006/6/1 8:50 1050k 2006/06/01 C:\cygwin\bin\cygcrypto-0.9.8.dll - os=4.0 img=1.0 sys=4.0 "cygcrypto-0.9.8.dll" v0.0 ts=2006/6/1 9:08 645k 2003/04/11 C:\cygwin\bin\cygcrypto.dll - os=4.0 img=1.0 sys=4.0 "cygcrypto.dll" v0.0 ts=2003/4/11 3:37 194k 2006/06/12 C:\cygwin\bin\cygcurl-3.dll - os=4.0 img=1.0 sys=4.0 "cygcurl-3.dll" v0.0 ts=2006/6/12 2:00 22k 2004/02/10 C:\cygwin\bin\cygcygipc-2.dll - os=4.0 img=1.0 sys=4.0 "cygcygipc-2.dll" v0.0 ts=2004/2/9 18:48 380k 2002/07/24 C:\cygwin\bin\cygdb-3.1.dll - os=4.0 img=1.0 sys=4.0 "cygdb-3.1.dll" v0.0 ts=2002/7/24 9:24 831k 2003/09/20 C:\cygwin\bin\cygdb-4.1.dll - os=4.0 img=1.0 sys=4.0 "cygdb-4.1.dll" v0.0 ts=2003/9/20 14:51 895k 2004/04/28 C:\cygwin\bin\cygdb-4.2.dll - os=4.0 img=1.0 sys=4.0 "cygdb-4.2.dll" v0.0 ts=2004/4/27 8:31 965k 2005/05/14 C:\cygwin\bin\cygdb-4.3.dll - os=4.0 img=1.0 sys=4.0 "cygdb-4.3.dll" v0.0 ts=2005/5/14 5:37 326k 2002/06/26 C:\cygwin\bin\cygdb2.dll - os=4.0 img=1.0 sys=4.0 "cygdb2.dll" v0.0 ts=2002/6/26 10:48 487k 2002/07/24 C:\cygwin\bin\cygdb_cxx-3.1.dll - os=4.0 img=1.0 sys=4.0 "cygdb_cxx-3.1.dll" v0.0 ts=2002/7/24 9:25 1080k 2003/09/20 C:\cygwin\bin\cygdb_cxx-4.1.dll - os=4.0 img=1.0 sys=4.0 "cygdb_cxx-4.1.dll" v0.0 ts=2003/9/20 14:53 1156k 2004/04/28 C:\cygwin\bin\cygdb_cxx-4.2.dll - os=4.0 img=1.0 sys=4.0 "cygdb_cxx-4.2.dll" v0.0 ts=2004/4/27 8:35 1240k 2005/05/14 C:\cygwin\bin\cygdb_cxx-4.3.dll - os=4.0 img=1.0 sys=4.0 "cygdb_cxx-4.3.dll" v0.0 ts=2005/5/14 5:41 9k 2004/10/24 C:\cygwin\bin\cygdlloader-6.dll - os=4.0 img=1.0 sys=4.0 "cygdlloader-6.dll" v0.0 ts=2004/10/24 0:59 507k 2005/10/10 C:\cygwin\bin\cygEMF-1.dll - os=4.0 img=1.0 sys=4.0 "cygEMF-1.dll" v0.0 ts=2005/10/9 22:11 27k 2005/08/21 C:\cygwin\bin\cygesd-0.dll - os=4.0 img=1.0 sys=4.0 "cygesd-0.dll" v0.0 ts=2005/8/21 16:04 94k 2004/06/07 C:\cygwin\bin\cygexif-10.dll - os=4.0 img=1.0 sys=4.0 "cygexif-10.dll" v0.0 ts=2004/6/7 1:53 107k 2005/08/08 C:\cygwin\bin\cygexif-12.dll - os=4.0 img=1.0 sys=4.0 "cygexif-12.dll" v0.0 ts=2005/8/8 4:50 174k 2004/10/14 C:\cygwin\bin\cygexpat-0.dll - os=4.0 img=1.0 sys=4.0 "cygexpat-0.dll" v0.0 ts=2004/10/14 1:34 72k 2005/12/10 C:\cygwin\bin\cygexslt-0.dll - os=4.0 img=1.0 sys=4.0 "cygexslt-0.dll" v0.0 ts=2005/12/9 16:45 509k 2006/01/11 C:\cygwin\bin\cygfftw3-3.dll - os=4.0 img=1.0 sys=4.0 "cygfftw3-3.dll" v0.0 ts=2006/1/10 18:24 69k 2006/01/11 C:\cygwin\bin\cygfftw3_threads-3.dll - os=4.0 img=1.0 sys=4.0 "cygfftw3_threads-3.dll" v0.0 ts=2006/1/11 5:27 214k 2005/08/13 C:\cygwin\bin\cygFLAC++-5.dll - os=4.0 img=1.0 sys=4.0 "cygFLAC++-5.dll" v0.0 ts=2005/8/13 1:09 274k 2005/08/13 C:\cygwin\bin\cygFLAC-7.dll - os=4.0 img=1.0 sys=4.0 "cygFLAC-7.dll" v0.0 ts=2005/8/13 1:04 654k 2003/11/04 C:\cygwin\bin\cygfltknox-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox-0.dll" v0.0 ts=2003/11/4 13:57 65k 2003/11/04 C:\cygwin\bin\cygfltknox_forms-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox_forms-0.dll" v0.0 ts=2003/11/4 13:57 81k 2003/11/04 C:\cygwin\bin\cygfltknox_gl-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox_gl-0.dll" v0.0 ts=2003/11/4 13:58 108k 2003/11/04 C:\cygwin\bin\cygfltknox_images-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox_images-0.dll" v0.0 ts=2003/11/4 13:58 129k 2004/03/11 C:\cygwin\bin\cygfontconfig-1.dll - os=4.0 img=1.0 sys=4.0 "cygfontconfig-1.dll" v0.0 ts=2004/3/10 16:12 40k 2006/03/24 C:\cygwin\bin\cygform-8.dll - os=4.0 img=1.0 sys=4.0 "cygform-8.dll" v0.0 ts=2006/3/23 23:16 45k 2001/04/25 C:\cygwin\bin\cygform5.dll - os=4.0 img=1.0 sys=4.0 "cygform5.dll" v0.0 ts=2001/4/24 22:28 35k 2002/01/09 C:\cygwin\bin\cygform6.dll - os=4.0 img=1.0 sys=4.0 "cygform6.dll" v0.0 ts=2002/1/8 22:03 48k 2003/08/09 C:\cygwin\bin\cygform7.dll - os=4.0 img=1.0 sys=4.0 "cygform7.dll" v0.0 ts=2003/8/9 2:25 859k 2005/08/08 C:\cygwin\bin\cygfpx-1.dll - os=4.0 img=1.0 sys=4.0 "cygfpx-1.dll" v0.0 ts=2005/8/8 14:35 375k 2005/09/06 C:\cygwin\bin\cygfreetype-6.dll - os=4.0 img=1.0 sys=4.0 "cygfreetype-6.dll" v0.0 ts=2005/9/6 15:51 23k 2005/11/30 C:\cygwin\bin\cyggailutil-17.dll - os=4.0 img=1.0 sys=4.0 "cyggailutil-17.dll" v0.0 ts=2005/11/30 13:11 178k 2005/09/28 C:\cygwin\bin\cyggconf-2-4.dll - os=4.0 img=1.0 sys=4.0 "cyggconf-2-4.dll" v0.0 ts=2005/9/28 13:21 323k 2005/07/10 C:\cygwin\bin\cyggcrypt-11.dll - os=4.0 img=1.0 sys=4.0 "cyggcrypt-11.dll" v0.0 ts=2005/7/9 17:10 222k 2005/01/13 C:\cygwin\bin\cyggd-2.dll - os=4.0 img=1.0 sys=4.0 "cyggd-2.dll" v0.0 ts=2005/1/13 7:56 28k 2003/07/20 C:\cygwin\bin\cyggdbm-3.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm-3.dll" v0.0 ts=2003/7/20 0:58 30k 2003/08/11 C:\cygwin\bin\cyggdbm-4.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm-4.dll" v0.0 ts=2003/8/10 19:12 19k 2003/03/22 C:\cygwin\bin\cyggdbm.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm.dll" v0.0 ts=2002/2/19 19:05 15k 2003/07/20 C:\cygwin\bin\cyggdbm_compat-3.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm_compat-3.dll" v0.0 ts=2003/7/20 1:00 15k 2003/08/11 C:\cygwin\bin\cyggdbm_compat-4.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm_compat-4.dll" v0.0 ts=2003/8/10 19:13 195k 2004/09/02 C:\cygwin\bin\cyggdk-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk-1-2-0.dll" v0.0 ts=2004/9/2 11:31 451k 2005/12/27 C:\cygwin\bin\cyggdk-x11-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk-x11-2.0-0.dll" v0.0 ts=2005/12/26 3:20 128k 2005/08/02 C:\cygwin\bin\cyggdk_imlib-1.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_imlib-1.dll" v0.0 ts=2005/8/1 17:36 77k 2005/12/27 C:\cygwin\bin\cyggdk_pixbuf-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf-2.0-0.dll" v0.0 ts=2005/12/26 3:11 72k 2005/11/16 C:\cygwin\bin\cyggdk_pixbuf-2.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf-2.dll" v0.0 ts=2005/11/16 13:40 54k 2005/12/27 C:\cygwin\bin\cyggdk_pixbuf_xlib-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf_xlib-2.0-0.dll" v0.0 ts=2005/12/26 4:03 105k 2005/11/16 C:\cygwin\bin\cyggdk_pixbuf_xlib-2.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf_xlib-2.dll" v0.0 ts=2005/11/16 13:41 23k 2006/02/14 C:\cygwin\bin\cygGeoIP-1.dll - os=4.0 img=1.0 sys=4.0 "cygGeoIP-1.dll" v0.0 ts=2006/2/6 13:13 21k 2006/02/14 C:\cygwin\bin\cygGeoIPUpdate-0.dll - os=4.0 img=1.0 sys=4.0 "cygGeoIPUpdate-0.dll" v0.0 ts=2006/2/13 23:27 116k 2004/10/10 C:\cygwin\bin\cyggeotiff-1.dll - os=4.0 img=1.0 sys=4.0 "cyggeotiff-1.dll" v0.0 ts=2004/10/10 16:55 78k 2005/11/20 C:\cygwin\bin\cyggettextlib-0-14-5.dll - os=4.0 img=1.0 sys=4.0 "cyggettextlib-0-14-5.dll" v0.0 ts=2005/11/19 18:11 13k 2005/11/20 C:\cygwin\bin\cyggettextpo-0.dll - os=4.0 img=1.0 sys=4.0 "cyggettextpo-0.dll" v0.0 ts=2005/11/19 18:11 163k 2005/11/20 C:\cygwin\bin\cyggettextsrc-0-14-5.dll - os=4.0 img=1.0 sys=4.0 "cyggettextsrc-0-14-5.dll" v0.0 ts=2005/11/19 18:11 32k 2006/02/28 C:\cygwin\bin\cyggg-1.dll - os=4.0 img=1.0 sys=4.0 "cyggg-1.dll" v0.0 ts=2006/2/28 8:13 46k 2006/03/02 C:\cygwin\bin\cygggi-2.dll - os=4.0 img=1.0 sys=4.0 "cygggi-2.dll" v0.0 ts=2006/3/2 8:53 9k 2006/03/02 C:\cygwin\bin\cygggimisc-2.dll - os=4.0 img=1.0 sys=4.0 "cygggimisc-2.dll" v0.0 ts=2006/3/2 12:05 9k 2006/03/02 C:\cygwin\bin\cygggiwmh-0.dll - os=4.0 img=1.0 sys=4.0 "cygggiwmh-0.dll" v0.0 ts=2006/3/2 11:48 24k 2006/02/28 C:\cygwin\bin\cyggii-1.dll - os=4.0 img=1.0 sys=4.0 "cyggii-1.dll" v0.0 ts=2006/2/28 8:15 81k 2005/08/18 C:\cygwin\bin\cygglade-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygglade-2.0-0.dll" v0.0 ts=2005/8/18 11:51 135k 2005/03/16 C:\cygwin\bin\cygglib-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygglib-1-2-0.dll" v0.0 ts=2005/3/15 18:16 557k 2006/01/04 C:\cygwin\bin\cygglib-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygglib-2.0-0.dll" v0.0 ts=2006/1/4 1:48 135k 2005/12/11 C:\cygwin\bin\cygglitz-1.dll - os=4.0 img=1.0 sys=4.0 "cygglitz-1.dll" v0.0 ts=2005/12/11 12:35 19k 2005/12/11 C:\cygwin\bin\cygglitz-glx-1.dll - os=4.0 img=1.0 sys=4.0 "cygglitz-glx-1.dll" v0.0 ts=2005/12/11 12:39 12k 2005/03/16 C:\cygwin\bin\cyggmodule-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggmodule-1-2-0.dll" v0.0 ts=2005/3/15 18:18 10k 2006/01/04 C:\cygwin\bin\cyggmodule-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggmodule-2.0-0.dll" v0.0 ts=2006/1/4 1:49 158k 2004/10/16 C:\cygwin\bin\cyggmp-3.dll - os=4.0 img=1.0 sys=4.0 "cyggmp-3.dll" v0.0 ts=2004/10/16 0:40 288k 2004/10/16 C:\cygwin\bin\cyggmpxx-3.dll - os=4.0 img=1.0 sys=4.0 "cyggmpxx-3.dll" v0.0 ts=2004/10/16 0:40 68k 2005/12/01 C:\cygwin\bin\cyggnome-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnome-2-0.dll" v0.0 ts=2005/11/30 18:14 87k 2005/11/10 C:\cygwin\bin\cyggnome-32.dll - os=4.0 img=1.0 sys=4.0 "cyggnome-32.dll" v0.0 ts=2005/11/10 13:21 35k 2006/02/14 C:\cygwin\bin\cyggnome-keyring-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnome-keyring-0.dll" v0.0 ts=2006/2/14 15:55 156k 2005/11/30 C:\cygwin\bin\cyggnomecanvas-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomecanvas-2-0.dll" v0.0 ts=2005/11/30 14:55 12k 2005/11/16 C:\cygwin\bin\cyggnomecanvaspixbuf-1.dll - os=4.0 img=1.0 sys=4.0 "cyggnomecanvaspixbuf-1.dll" v0.0 ts=2005/11/16 13:41 338k 2005/08/22 C:\cygwin\bin\cyggnomeprint-2-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeprint-2-2-0.dll" v0.0 ts=2005/8/21 17:20 179k 2005/08/22 C:\cygwin\bin\cyggnomeprintui-2-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeprintui-2-2-0.dll" v0.0 ts=2005/8/22 12:14 18k 2005/11/10 C:\cygwin\bin\cyggnomesupport-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomesupport-0.dll" v0.0 ts=2005/11/10 12:30 509k 2006/02/07 C:\cygwin\bin\cyggnomeui-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeui-2-0.dll" v0.0 ts=2006/2/7 13:57 826k 2005/11/10 C:\cygwin\bin\cyggnomeui-32.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeui-32.dll" v0.0 ts=2005/11/10 13:24 332k 2005/12/06 C:\cygwin\bin\cyggnomevfs-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomevfs-2-0.dll" v0.0 ts=2005/12/5 14:01 42k 2005/11/10 C:\cygwin\bin\cyggnorba-27.dll - os=4.0 img=1.0 sys=4.0 "cyggnorba-27.dll" v0.0 ts=2005/11/10 13:27 22k 2005/11/10 C:\cygwin\bin\cyggnorbagtk-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnorbagtk-0.dll" v0.0 ts=2005/11/10 13:10 382k 2005/08/21 C:\cygwin\bin\cyggnutls-11.dll - os=4.0 img=1.0 sys=4.0 "cyggnutls-11.dll" v0.0 ts=2005/8/21 4:40 71k 2005/08/21 C:\cygwin\bin\cyggnutls-extra-11.dll - os=4.0 img=1.0 sys=4.0 "cyggnutls-extra-11.dll" v0.0 ts=2005/8/21 4:42 21k 2005/08/21 C:\cygwin\bin\cyggnutls-openssl-11.dll - os=4.0 img=1.0 sys=4.0 "cyggnutls-openssl-11.dll" v0.0 ts=2005/8/21 4:42 229k 2006/01/04 C:\cygwin\bin\cyggobject-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggobject-2.0-0.dll" v0.0 ts=2006/1/4 1:49 12k 2005/07/09 C:\cygwin\bin\cyggpg-error-0.dll - os=4.0 img=1.0 sys=4.0 "cyggpg-error-0.dll" v0.0 ts=2005/7/9 15:34 351k 2004/07/17 C:\cygwin\bin\cygGraphicsMagick++-0.dll - os=4.0 img=1.0 sys=4.0 "cygGraphicsMagick++-0.dll" v0.0 ts=2004/7/17 1:48 2170k 2004/07/17 C:\cygwin\bin\cygGraphicsMagick-0.dll - os=4.0 img=1.0 sys=4.0 "cygGraphicsMagick-0.dll" v0.0 ts=2004/7/17 1:46 1444k 2006/05/24 C:\cygwin\bin\cyggsl-0.dll - os=4.0 img=1.0 sys=4.0 "cyggsl-0.dll" v0.0 ts=2006/5/24 13:26 186k 2006/05/24 C:\cygwin\bin\cyggslcblas-0.dll - os=4.0 img=1.0 sys=4.0 "cyggslcblas-0.dll" v0.0 ts=2006/5/24 12:43 10k 2005/03/16 C:\cygwin\bin\cyggthread-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggthread-1-2-0.dll" v0.0 ts=2005/3/15 18:18 14k 2006/01/04 C:\cygwin\bin\cyggthread-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggthread-2.0-0.dll" v0.0 ts=2006/1/4 1:50 1293k 2004/09/02 C:\cygwin\bin\cyggtk-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggtk-1-2-0.dll" v0.0 ts=2004/9/2 11:44 2764k 2005/12/27 C:\cygwin\bin\cyggtk-x11-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggtk-x11-2.0-0.dll" v0.0 ts=2005/12/26 3:43 340k 2006/02/15 C:\cygwin\bin\cyggtkhtml-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggtkhtml-2-0.dll" v0.0 ts=2006/2/14 18:56 338k 2005/11/10 C:\cygwin\bin\cyggtkxmhtml-1.dll - os=4.0 img=1.0 sys=4.0 "cyggtkxmhtml-1.dll" v0.0 ts=2005/11/10 13:04 528k 2005/10/09 C:\cygwin\bin\cygguile-12.dll - os=4.0 img=1.0 sys=4.0 "cygguile-12.dll" v0.0 ts=2005/10/9 6:25 488k 2002/07/18 C:\cygwin\bin\cygguile-14.dll - os=4.0 img=1.0 sys=4.0 "cygguile-14.dll" v0.0 ts=2002/7/18 3:35 640k 2004/10/12 C:\cygwin\bin\cygguile-16.dll - os=4.0 img=1.0 sys=4.0 "cygguile-16.dll" v0.0 ts=2004/10/12 7:42 18k 2005/10/09 C:\cygwin\bin\cygguile-ltdl-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-ltdl-1.dll" v0.0 ts=2005/10/9 6:24 5k 2004/10/12 C:\cygwin\bin\cygguile-ltdl-2.dll - os=4.0 img=1.0 sys=4.0 "cygguile-ltdl-2.dll" v0.0 ts=2004/10/12 4:02 11k 2004/10/12 C:\cygwin\bin\cygguile-srfi-srfi-1-v-2-2.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-1-v-2-2.dll" v0.0 ts=2004/10/12 7:42 63k 2002/07/18 C:\cygwin\bin\cygguile-srfi-srfi-13-14-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-13-14-1.dll" v0.0 ts=2002/7/18 3:35 68k 2005/10/09 C:\cygwin\bin\cygguile-srfi-srfi-13-14-v-1-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-13-14-v-1-1.dll" v0.0 ts=2005/10/9 6:25 4k 2004/10/12 C:\cygwin\bin\cygguile-srfi-srfi-13-14-v-2-2.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-13-14-v-2-2.dll" v0.0 ts=2004/10/12 7:43 24k 2002/07/18 C:\cygwin\bin\cygguile-srfi-srfi-4-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-4-1.dll" v0.0 ts=2002/7/18 3:35 31k 2005/10/09 C:\cygwin\bin\cygguile-srfi-srfi-4-v-1-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-4-v-1-1.dll" v0.0 ts=2005/10/9 6:25 22k 2004/10/12 C:\cygwin\bin\cygguile-srfi-srfi-4-v-2-2.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-4-v-2-2.dll" v0.0 ts=2004/10/12 7:42 14k 2002/07/18 C:\cygwin\bin\cygguilereadline-14.dll - os=4.0 img=1.0 sys=4.0 "cygguilereadline-14.dll" v0.0 ts=2002/7/18 3:35 12k 2005/10/09 C:\cygwin\bin\cygguilereadline-v-12-12.dll - os=4.0 img=1.0 sys=4.0 "cygguilereadline-v-12-12.dll" v0.0 ts=2005/10/9 6:25 11k 2004/10/12 C:\cygwin\bin\cygguilereadline-v-16-16.dll - os=4.0 img=1.0 sys=4.0 "cygguilereadline-v-16-16.dll" v0.0 ts=2004/10/12 7:42 17k 2001/06/28 C:\cygwin\bin\cyghistory4.dll - os=4.0 img=1.0 sys=4.0 "cyghistory4.dll" v0.0 ts=2001/1/6 20:34 29k 2003/08/10 C:\cygwin\bin\cyghistory5.dll - os=4.0 img=1.0 sys=4.0 "cyghistory5.dll" v0.0 ts=2003/8/10 16:16 24k 2006/03/25 C:\cygwin\bin\cyghistory6.dll - os=4.0 img=1.0 sys=4.0 "cyghistory6.dll" v0.0 ts=2006/3/25 6:05 335k 2006/06/06 C:\cygwin\bin\cyghttpd2core.dll - os=4.0 img=1.0 sys=4.0 "cyghttpd2core.dll" v0.0 ts=2006/6/6 5:28 947k 2005/11/20 C:\cygwin\bin\cygiconv-2.dll - os=4.0 img=1.0 sys=4.0 "cygiconv-2.dll" v0.0 ts=2005/11/19 18:24 136k 2005/08/01 C:\cygwin\bin\cygIDL-0-6-0.dll - os=4.0 img=1.0 sys=4.0 "cygIDL-0-6-0.dll" v0.0 ts=2005/8/1 12:50 142k 2005/08/01 C:\cygwin\bin\cygIDL-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygIDL-2-0.dll" v0.0 ts=2005/8/1 14:33 40k 2005/08/01 C:\cygwin\bin\cygIIOP-0.dll - os=4.0 img=1.0 sys=4.0 "cygIIOP-0.dll" v0.0 ts=2005/8/1 13:28 155k 2005/08/02 C:\cygwin\bin\cygImlib-1.dll - os=4.0 img=1.0 sys=4.0 "cygImlib-1.dll" v0.0 ts=2005/8/1 17:37 9k 2005/08/02 C:\cygwin\bin\cygimlib-bmp.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-bmp.dll" v0.0 ts=2005/8/1 17:38 6k 2005/08/02 C:\cygwin\bin\cygimlib-gif.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-gif.dll" v0.0 ts=2005/8/1 17:38 7k 2005/08/02 C:\cygwin\bin\cygimlib-jpeg.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-jpeg.dll" v0.0 ts=2005/8/1 17:38 11k 2005/08/02 C:\cygwin\bin\cygimlib-png.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-png.dll" v0.0 ts=2005/8/1 17:39 8k 2005/08/02 C:\cygwin\bin\cygimlib-ppm.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-ppm.dll" v0.0 ts=2005/8/1 17:38 7k 2005/08/02 C:\cygwin\bin\cygimlib-ps.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-ps.dll" v0.0 ts=2005/8/1 17:38 6k 2005/08/02 C:\cygwin\bin\cygimlib-tiff.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-tiff.dll" v0.0 ts=2005/8/1 17:39 10k 2005/08/02 C:\cygwin\bin\cygimlib-xpm.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-xpm.dll" v0.0 ts=2005/8/1 17:38 22k 2001/12/13 C:\cygwin\bin\cygintl-1.dll - os=4.0 img=1.0 sys=4.0 "cygintl-1.dll" v0.0 ts=2001/12/13 1:28 37k 2003/08/10 C:\cygwin\bin\cygintl-2.dll - os=4.0 img=1.0 sys=4.0 "cygintl-2.dll" v0.0 ts=2003/8/10 14:50 31k 2005/11/20 C:\cygwin\bin\cygintl-3.dll - os=4.0 img=1.0 sys=4.0 "cygintl-3.dll" v0.0 ts=2005/11/19 18:04 21k 2001/06/20 C:\cygwin\bin\cygintl.dll - os=4.0 img=1.0 sys=4.0 "cygintl.dll" v0.0 ts=2001/6/20 10:09 12k 2003/02/17 C:\cygwin\bin\cygioperm-0.dll - os=4.0 img=1.0 sys=4.0 "cygioperm-0.dll" v0.0 ts=2003/2/17 11:58 241k 2004/08/06 C:\cygwin\bin\cygjasper-1-701-1.dll - os=4.0 img=1.0 sys=4.0 "cygjasper-1-701-1.dll" v0.0 ts=2004/8/6 8:17 48k 2003/08/10 C:\cygwin\bin\cygjbig1.dll - os=4.0 img=1.0 sys=4.0 "cygjbig1.dll" v0.0 ts=2003/8/10 16:58 132k 2003/08/11 C:\cygwin\bin\cygjpeg-62.dll - os=4.0 img=1.0 sys=4.0 "cygjpeg-62.dll" v0.0 ts=2003/8/10 17:37 119k 2002/02/09 C:\cygwin\bin\cygjpeg6b.dll - os=4.0 img=1.0 sys=4.0 "cygjpeg6b.dll" v0.0 ts=2002/2/8 21:19 60k 2004/09/27 C:\cygwin\bin\cygkpathsea-3.dll - os=4.0 img=1.0 sys=4.0 "cygkpathsea-3.dll" v0.0 ts=2004/9/27 10:32 60k 2003/07/27 C:\cygwin\bin\cygkpathsea-3abi13.dll - os=4.0 img=1.0 sys=4.0 "cygkpathsea-3abi13.dll" v0.0 ts=2003/7/27 13:23 65k 2005/05/05 C:\cygwin\bin\cygkpathsea-4.dll - os=4.0 img=1.0 sys=4.0 "cygkpathsea-4.dll" v0.0 ts=2005/5/5 7:33 41k 2005/08/29 C:\cygwin\bin\cyglber-2-2-7.dll - os=4.0 img=1.0 sys=4.0 "cyglber-2-2-7.dll" v0.0 ts=2005/8/14 10:48 40k 2004/01/02 C:\cygwin\bin\cyglber-2.dll - os=4.0 img=1.0 sys=4.0 "cyglber-2.dll" v0.0 ts=2004/1/2 3:11 156k 2005/08/08 C:\cygwin\bin\cyglcms-1.dll - os=4.0 img=1.0 sys=4.0 "cyglcms-1.dll" v0.0 ts=2005/8/8 3:15 176k 2005/08/29 C:\cygwin\bin\cygldap-2-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygldap-2-2-7.dll" v0.0 ts=2005/8/29 4:14 194k 2004/01/02 C:\cygwin\bin\cygldap-2.dll - os=4.0 img=1.0 sys=4.0 "cygldap-2.dll" v0.0 ts=2004/1/2 3:27 188k 2005/08/29 C:\cygwin\bin\cygldap_r-2-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygldap_r-2-2-7.dll" v0.0 ts=2005/8/29 4:14 202k 2004/01/02 C:\cygwin\bin\cygldap_r-2.dll - os=4.0 img=1.0 sys=4.0 "cygldap_r-2.dll" v0.0 ts=2004/1/2 3:27 68k 2006/01/21 C:\cygwin\bin\cyglightcomp.dll - os=4.0 img=1.0 sys=4.0 "cyglightcomp.dll" v0.0 ts=2006/1/21 2:42 23k 2006/04/19 C:\cygwin\bin\cygltdl-3.dll - os=4.0 img=1.0 sys=4.0 "cygltdl-3.dll" v0.0 ts=2006/4/18 23:19 26k 2004/10/24 C:\cygwin\bin\cygltdl-6.dll - os=4.0 img=1.0 sys=4.0 "cygltdl-6.dll" v0.0 ts=2004/10/24 0:59 48k 2005/11/19 C:\cygwin\bin\cygmagic-1.dll - os=4.0 img=1.0 sys=4.0 "cygmagic-1.dll" v0.0 ts=2005/11/19 3:22 369k 2004/08/11 C:\cygwin\bin\cygMagick++-6.dll - os=4.0 img=1.0 sys=4.0 "cygMagick++-6.dll" v0.0 ts=2004/8/10 23:04 3214k 2004/08/11 C:\cygwin\bin\cygMagick-6.dll - os=4.0 img=1.0 sys=4.0 "cygMagick-6.dll" v0.0 ts=2004/8/10 22:37 181k 2003/10/06 C:\cygwin\bin\cygmcrypt-4.dll - os=4.0 img=1.0 sys=4.0 "cygmcrypt-4.dll" v0.0 ts=2003/10/6 7:54 21k 2006/03/24 C:\cygwin\bin\cygmenu-8.dll - os=4.0 img=1.0 sys=4.0 "cygmenu-8.dll" v0.0 ts=2006/3/23 23:16 26k 2001/04/25 C:\cygwin\bin\cygmenu5.dll - os=4.0 img=1.0 sys=4.0 "cygmenu5.dll" v0.0 ts=2001/4/24 22:27 20k 2002/01/09 C:\cygwin\bin\cygmenu6.dll - os=4.0 img=1.0 sys=4.0 "cygmenu6.dll" v0.0 ts=2002/1/8 22:03 29k 2003/08/09 C:\cygwin\bin\cygmenu7.dll - os=4.0 img=1.0 sys=4.0 "cygmenu7.dll" v0.0 ts=2003/8/9 2:25 222k 2005/05/28 C:\cygwin\bin\cygmhash-2.dll - os=4.0 img=1.0 sys=4.0 "cygmhash-2.dll" v0.0 ts=2005/5/28 2:40 21k 2004/10/22 C:\cygwin\bin\cygminires.dll - os=4.0 img=1.0 sys=4.0 "cygminires.dll" v0.0 ts=2004/10/22 13:28 330k 2005/08/08 C:\cygwin\bin\cygmng-1.dll - os=4.0 img=1.0 sys=4.0 "cygmng-1.dll" v0.0 ts=2005/8/8 14:17 71k 2004/10/16 C:\cygwin\bin\cygmp-3.dll - os=4.0 img=1.0 sys=4.0 "cygmp-3.dll" v0.0 ts=2004/10/16 0:40 95k 2004/10/16 C:\cygwin\bin\cygmpfr-0.dll - os=4.0 img=1.0 sys=4.0 "cygmpfr-0.dll" v0.0 ts=2004/10/16 0:47 408k 2006/05/11 C:\cygwin\bin\cygnaim_core-0.dll - os=4.0 img=1.0 sys=4.0 "cygnaim_core-0.dll" v0.0 ts=2006/5/10 18:56 67k 2006/03/24 C:\cygwin\bin\cygncurses++-8.dll - os=4.0 img=1.0 sys=4.0 "cygncurses++-8.dll" v0.0 ts=2006/3/23 23:17 156k 2001/04/25 C:\cygwin\bin\cygncurses++5.dll - os=4.0 img=1.0 sys=4.0 "cygncurses++5.dll" v0.0 ts=2001/4/24 22:29 175k 2002/01/09 C:\cygwin\bin\cygncurses++6.dll - os=4.0 img=1.0 sys=4.0 "cygncurses++6.dll" v0.0 ts=2002/1/8 22:03 227k 2006/03/24 C:\cygwin\bin\cygncurses-8.dll - os=4.0 img=1.0 sys=4.0 "cygncurses-8.dll" v0.0 ts=2006/3/23 20:51 226k 2001/04/25 C:\cygwin\bin\cygncurses5.dll - os=4.0 img=1.0 sys=4.0 "cygncurses5.dll" v0.0 ts=2001/4/24 22:17 202k 2002/01/09 C:\cygwin\bin\cygncurses6.dll - os=4.0 img=1.0 sys=4.0 "cygncurses6.dll" v0.0 ts=2002/1/8 22:03 224k 2003/08/09 C:\cygwin\bin\cygncurses7.dll - os=4.0 img=1.0 sys=4.0 "cygncurses7.dll" v0.0 ts=2003/8/9 2:24 91k 2005/11/24 C:\cygwin\bin\cygneon-24.dll - os=4.0 img=1.0 sys=4.0 "cygneon-24.dll" v0.0 ts=2005/11/24 4:21 90k 2006/01/25 C:\cygwin\bin\cygneon-25.dll - os=4.0 img=1.0 sys=4.0 "cygneon-25.dll" v0.0 ts=2006/1/25 3:02 147k 2005/10/23 C:\cygwin\bin\cygnetpbm-10.dll - os=4.0 img=1.0 sys=4.0 "cygnetpbm-10.dll" v0.0 ts=2005/10/23 13:04 23k 2005/08/12 C:\cygwin\bin\cygogg-0.dll - os=4.0 img=1.0 sys=4.0 "cygogg-0.dll" v0.0 ts=2005/8/12 15:39 150k 2005/08/13 C:\cygwin\bin\cygOggFLAC++-2.dll - os=4.0 img=1.0 sys=4.0 "cygOggFLAC++-2.dll" v0.0 ts=2005/8/13 1:09 107k 2005/08/13 C:\cygwin\bin\cygOggFLAC-3.dll - os=4.0 img=1.0 sys=4.0 "cygOggFLAC-3.dll" v0.0 ts=2005/8/13 1:09 49k 2004/08/02 C:\cygwin\bin\cygogrove-0.dll - os=4.0 img=1.0 sys=4.0 "cygogrove-0.dll" v0.0 ts=2004/8/2 8:41 131k 2005/08/21 C:\cygwin\bin\cygopencdk-8.dll - os=4.0 img=1.0 sys=4.0 "cygopencdk-8.dll" v0.0 ts=2005/8/21 8:35 217k 2005/08/01 C:\cygwin\bin\cygORBit-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBit-0.dll" v0.0 ts=2005/8/1 13:29 287k 2005/08/17 C:\cygwin\bin\cygORBit-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBit-2-0.dll" v0.0 ts=2005/8/17 14:45 36k 2005/08/17 C:\cygwin\bin\cygORBit-imodule-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBit-imodule-2-0.dll" v0.0 ts=2005/8/17 15:11 28k 2005/08/01 C:\cygwin\bin\cygORBitCosNaming-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBitCosNaming-0.dll" v0.0 ts=2005/8/1 13:29 16k 2005/08/17 C:\cygwin\bin\cygORBitCosNaming-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBitCosNaming-2-0.dll" v0.0 ts=2005/8/17 15:11 5k 2005/08/01 C:\cygwin\bin\cygORBitutil-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBitutil-0.dll" v0.0 ts=2005/8/1 12:51 1706k 2004/08/02 C:\cygwin\bin\cygosp-4.dll - os=4.0 img=1.0 sys=4.0 "cygosp-4.dll" v0.0 ts=2004/8/2 7:51 326k 2004/08/02 C:\cygwin\bin\cygospgrove-0.dll - os=4.0 img=1.0 sys=4.0 "cygospgrove-0.dll" v0.0 ts=2004/8/2 9:07 1922k 2004/08/02 C:\cygwin\bin\cygostyle-0.dll - os=4.0 img=1.0 sys=4.0 "cygostyle-0.dll" v0.0 ts=2004/8/2 9:07 12k 2006/03/24 C:\cygwin\bin\cygpanel-8.dll - os=4.0 img=1.0 sys=4.0 "cygpanel-8.dll" v0.0 ts=2006/3/23 23:16 15k 2001/04/25 C:\cygwin\bin\cygpanel5.dll - os=4.0 img=1.0 sys=4.0 "cygpanel5.dll" v0.0 ts=2001/4/24 22:27 12k 2002/01/09 C:\cygwin\bin\cygpanel6.dll - os=4.0 img=1.0 sys=4.0 "cygpanel6.dll" v0.0 ts=2002/1/8 22:03 19k 2003/08/09 C:\cygwin\bin\cygpanel7.dll - os=4.0 img=1.0 sys=4.0 "cygpanel7.dll" v0.0 ts=2003/8/9 2:24 198k 2005/07/18 C:\cygwin\bin\cygpango-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpango-1.0-0.dll" v0.0 ts=2005/7/18 4:26 134k 2005/07/18 C:\cygwin\bin\cygpangoft2-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangoft2-1.0-0.dll" v0.0 ts=2005/7/18 4:28 33k 2005/07/18 C:\cygwin\bin\cygpangowin32-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangowin32-1.0-0.dll" v0.0 ts=2005/7/18 4:29 36k 2005/07/18 C:\cygwin\bin\cygpangox-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangox-1.0-0.dll" v0.0 ts=2005/7/18 4:27 22k 2005/07/18 C:\cygwin\bin\cygpangoxft-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangoxft-1.0-0.dll" v0.0 ts=2005/7/18 4:29 176k 2005/09/06 C:\cygwin\bin\cygpcre-0.dll - os=4.0 img=1.0 sys=4.0 "cygpcre-0.dll" v0.0 ts=2005/9/6 13:49 299k 2005/09/06 C:\cygwin\bin\cygpcrecpp-0.dll - os=4.0 img=1.0 sys=4.0 "cygpcrecpp-0.dll" v0.0 ts=2005/9/6 14:26 63k 2003/04/11 C:\cygwin\bin\cygpcreOld.dll - os=4.0 img=1.0 sys=4.0 "cygpcre.dll" v0.0 ts=2003/4/11 1:31 6k 2005/09/06 C:\cygwin\bin\cygpcreposix-0.dll - os=4.0 img=1.0 sys=4.0 "cygpcreposix-0.dll" v0.0 ts=2005/9/6 14:26 1249k 2005/12/30 C:\cygwin\bin\cygperl5_8.dll - os=4.0 img=1.0 sys=4.0 "cygperl5_8.dll" v0.0 ts=2005/12/29 17:48 1063k 2005/10/13 C:\cygwin\bin\cygplot-2.dll - os=4.0 img=1.0 sys=4.0 "cygplot-2.dll" v0.0 ts=2005/10/13 7:30 1229k 2005/10/13 C:\cygwin\bin\cygplotter-2.dll - os=4.0 img=1.0 sys=4.0 "cygplotter-2.dll" v0.0 ts=2005/10/13 8:22 224k 2005/07/11 C:\cygwin\bin\cygpng10.dll - os=4.0 img=1.0 sys=4.0 "cygpng10.dll" v0.0 ts=2005/7/11 16:45 230k 2005/07/11 C:\cygwin\bin\cygpng12.dll - os=4.0 img=1.0 sys=4.0 "cygpng12.dll" v0.0 ts=2005/7/11 16:50 170k 2002/01/21 C:\cygwin\bin\cygpng2.dll - os=4.0 img=1.0 sys=4.0 "cygpng2.dll" v0.0 ts=2002/1/20 17:05 22k 2002/06/09 C:\cygwin\bin\cygpopt-0.dll - os=4.0 img=1.0 sys=4.0 "cygpopt-0.dll" v0.0 ts=2002/6/8 22:45 94k 2006/02/17 C:\cygwin\bin\cygpq.dll - os=4.0 img=1.0 sys=4.0 "cygpq.dll" v0.0 ts=2006/2/16 23:21 575k 2004/10/10 C:\cygwin\bin\cygproj-0.dll - os=4.0 img=1.0 sys=4.0 "cygproj-0.dll" v0.0 ts=2004/10/10 15:57 514k 2005/10/14 C:\cygwin\bin\cygpstoedit-0.dll - os=4.0 img=1.0 sys=4.0 "cygpstoedit-0.dll" v0.0 ts=2005/10/14 8:05 6018k 2005/08/11 C:\cygwin\bin\cygqt-mt-3.dll - os=4.0 img=1.0 sys=4.0 "cygqt-mt-3.dll" v0.0 ts=2005/8/11 15:06 202k 2005/08/11 C:\cygwin\bin\cygqui-1.dll - os=4.0 img=1.0 sys=4.0 "cygqui-1.dll" v0.0 ts=2005/8/11 15:13 108k 2001/06/28 C:\cygwin\bin\cygreadline4.dll - os=4.0 img=1.0 sys=4.0 "cygreadline4.dll" v0.0 ts=2001/1/6 20:34 148k 2003/08/10 C:\cygwin\bin\cygreadline5.dll - os=4.0 img=1.0 sys=4.0 "cygreadline5.dll" v0.0 ts=2003/8/10 16:16 152k 2006/03/25 C:\cygwin\bin\cygreadline6.dll - os=4.0 img=1.0 sys=4.0 "cygreadline6.dll" v0.0 ts=2006/3/25 6:05 704k 2006/01/20 C:\cygwin\bin\cygruby18.dll - os=4.0 img=1.0 sys=4.0 "cygruby18.dll" v0.0 ts=2006/1/20 2:43 78k 2004/10/13 C:\cygwin\bin\cygsasl2-2.dll - os=4.0 img=1.0 sys=4.0 "cygsasl2-2.dll" v0.0 ts=2004/10/13 15:50 380k 2003/12/13 C:\cygwin\bin\cygsmi-2.dll - os=4.0 img=1.0 sys=4.0 "cygsmi-2.dll" v0.0 ts=2003/12/12 16:57 129k 2005/08/15 C:\cygwin\bin\cygspeex-1.dll - os=4.0 img=1.0 sys=4.0 "cygspeex-1.dll" v0.0 ts=2005/8/15 2:57 230k 2006/06/01 C:\cygwin\bin\cygssl-0.9.7.dll - os=4.0 img=1.0 sys=4.0 "cygssl-0.9.7.dll" v0.0 ts=2006/6/1 8:50 214k 2006/06/01 C:\cygwin\bin\cygssl-0.9.8.dll - os=4.0 img=1.0 sys=4.0 "cygssl-0.9.8.dll" v0.0 ts=2006/6/1 9:08 165k 2003/04/11 C:\cygwin\bin\cygssl.dll - os=4.0 img=1.0 sys=4.0 "cygssl.dll" v0.0 ts=2003/4/11 3:37 28k 2004/11/15 C:\cygwin\bin\cygstartup-notification-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygstartup-notification-1-0.dll" v0.0 ts=2004/11/14 19:59 203k 2006/03/14 C:\cygwin\bin\cygsvn_client-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_client-1-0.dll" v0.0 ts=2006/3/14 9:13 45k 2006/03/14 C:\cygwin\bin\cygsvn_delta-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_delta-1-0.dll" v0.0 ts=2006/3/14 9:07 38k 2006/03/14 C:\cygwin\bin\cygsvn_diff-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_diff-1-0.dll" v0.0 ts=2006/3/14 9:12 30k 2006/03/14 C:\cygwin\bin\cygsvn_fs-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_fs-1-0.dll" v0.0 ts=2006/3/14 9:09 172k 2006/03/14 C:\cygwin\bin\cygsvn_fs_base-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_fs_base-1-0.dll" v0.0 ts=2006/3/14 9:08 127k 2006/03/14 C:\cygwin\bin\cygsvn_fs_fs-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_fs_fs-1-0.dll" v0.0 ts=2006/3/14 9:07 21k 2006/03/14 C:\cygwin\bin\cygsvn_ra-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra-1-0.dll" v0.0 ts=2006/3/14 9:13 133k 2006/03/14 C:\cygwin\bin\cygsvn_ra_dav-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra_dav-1-0.dll" v0.0 ts=2006/3/14 9:12 42k 2006/03/14 C:\cygwin\bin\cygsvn_ra_local-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra_local-1-0.dll" v0.0 ts=2006/3/14 9:09 87k 2006/03/14 C:\cygwin\bin\cygsvn_ra_svn-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra_svn-1-0.dll" v0.0 ts=2006/3/14 9:10 150k 2006/03/14 C:\cygwin\bin\cygsvn_repos-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_repos-1-0.dll" v0.0 ts=2006/3/14 9:09 187k 2006/03/14 C:\cygwin\bin\cygsvn_subr-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_subr-1-0.dll" v0.0 ts=2006/3/14 9:07 50k 2006/03/14 C:\cygwin\bin\cygsvn_swig_perl-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_swig_perl-1-0.dll" v0.0 ts=2006/3/14 9:18 172k 2006/03/14 C:\cygwin\bin\cygsvn_swig_py-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_swig_py-1-0.dll" v0.0 ts=2006/3/14 9:16 187k 2006/03/14 C:\cygwin\bin\cygsvn_swig_ruby-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_swig_ruby-1-0.dll" v0.0 ts=2006/3/14 9:21 200k 2006/03/14 C:\cygwin\bin\cygsvn_wc-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_wc-1-0.dll" v0.0 ts=2006/3/14 9:12 228k 2005/08/15 C:\cygwin\bin\cygt1-5.dll - os=4.0 img=1.0 sys=4.0 "cygt1-5.dll" v0.0 ts=2005/8/15 7:44 16k 2005/08/15 C:\cygwin\bin\cygt1x-5.dll - os=4.0 img=1.0 sys=4.0 "cygt1x-5.dll" v0.0 ts=2005/8/15 7:45 65k 2005/08/21 C:\cygwin\bin\cygtasn1-2.dll - os=4.0 img=1.0 sys=4.0 "cygtasn1-2.dll" v0.0 ts=2005/8/21 7:20 247k 2004/12/07 C:\cygwin\bin\cygtidy-0-99-0.dll - os=4.0 img=1.0 sys=4.0 "cygtidy-0-99-0.dll" v0.0 ts=2004/12/7 6:34 304k 2005/07/10 C:\cygwin\bin\cygtiff-5.dll - os=4.0 img=1.0 sys=4.0 "cygtiff-5.dll" v0.0 ts=2005/7/10 16:18 281k 2003/02/24 C:\cygwin\bin\cygtiff3.dll - os=4.0 img=1.0 sys=4.0 "cygtiff3.dll" v0.0 ts=2003/2/23 20:58 282k 2003/08/11 C:\cygwin\bin\cygtiff4.dll - os=4.0 img=1.0 sys=4.0 "cygtiff4.dll" v0.0 ts=2003/8/10 19:32 281k 2005/07/10 C:\cygwin\bin\cygtiffxx-5.dll - os=4.0 img=1.0 sys=4.0 "cygtiffxx-5.dll" v0.0 ts=2005/7/10 16:21 27k 2005/10/23 C:\cygwin\bin\cygungif-4.dll - os=4.0 img=1.0 sys=4.0 "cygungif-4.dll" v0.0 ts=2005/10/23 13:11 45k 2006/04/15 C:\cygwin\bin\cygusb0.dll - os=4.0 img=1.0 sys=4.0 "cygusb0.dll" v0.0 ts=2006/4/15 3:41 174k 2005/08/14 C:\cygwin\bin\cygvorbis-0.dll - os=4.0 img=1.0 sys=4.0 "cygvorbis-0.dll" v0.0 ts=2005/8/14 12:15 1125k 2005/08/14 C:\cygwin\bin\cygvorbisenc-2.dll - os=4.0 img=1.0 sys=4.0 "cygvorbisenc-2.dll" v0.0 ts=2005/8/14 12:20 42k 2005/08/14 C:\cygwin\bin\cygvorbisfile-3.dll - os=4.0 img=1.0 sys=4.0 "cygvorbisfile-3.dll" v0.0 ts=2005/8/14 12:20 154k 2004/08/11 C:\cygwin\bin\cygWand-6.dll - os=4.0 img=1.0 sys=4.0 "cygWand-6.dll" v0.0 ts=2004/8/10 23:04 314k 2005/08/10 C:\cygwin\bin\cygwmf-0-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygwmf-0-2-7.dll" v0.0 ts=2005/8/10 6:54 150k 2005/08/10 C:\cygwin\bin\cygwmflite-0-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygwmflite-0-2-7.dll" v0.0 ts=2005/8/10 6:53 152k 2006/02/08 C:\cygwin\bin\cygwnck-1-18.dll - os=4.0 img=1.0 sys=4.0 "cygwnck-1-18.dll" v0.0 ts=2006/2/7 19:10 2689k 2002/11/16 C:\cygwin\bin\cygxerces-c21.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c21.dll" v0.0 ts=2002/11/15 20:07 2984k 2003/02/07 C:\cygwin\bin\cygxerces-c22.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c22.dll" v0.0 ts=2003/2/7 10:50 3006k 2003/10/12 C:\cygwin\bin\cygxerces-c23.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c23.dll" v0.0 ts=2003/10/11 19:36 3520k 2003/12/16 C:\cygwin\bin\cygxerces-c24.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c24.dll" v0.0 ts=2003/12/16 11:45 3416k 2004/02/21 C:\cygwin\bin\cygxerces-c25.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c25.dll" v0.0 ts=2004/2/20 22:49 95k 2005/10/13 C:\cygwin\bin\cygxmi-0.dll - os=4.0 img=1.0 sys=4.0 "cygxmi-0.dll" v0.0 ts=2005/10/13 7:33 408k 2005/08/01 C:\cygwin\bin\cygxml-1.dll - os=4.0 img=1.0 sys=4.0 "cygxml-1.dll" v0.0 ts=2005/8/1 12:43 1430k 2005/11/18 C:\cygwin\bin\cygxml2-2.dll - os=4.0 img=1.0 sys=4.0 "cygxml2-2.dll" v0.0 ts=2005/11/18 9:48 45k 2006/04/18 C:\cygwin\bin\cygXpm-noX4.dll - os=4.0 img=1.0 sys=4.0 "cygXpm-noX4.dll" v0.0 ts=2006/4/17 22:06 200k 2005/12/10 C:\cygwin\bin\cygxslt-1.dll - os=4.0 img=1.0 sys=4.0 "cygxslt-1.dll" v0.0 ts=2005/12/9 16:43 65k 2005/08/23 C:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0 "cygz.dll" v0.0 ts=2005/8/22 19:03 78k 2005/11/10 C:\cygwin\bin\cygzvt-2.dll - os=4.0 img=1.0 sys=4.0 "cygzvt-2.dll" v0.0 ts=2005/11/10 13:06 1763k 2006/01/20 C:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0 "cygwin1.dll" v0.0 ts=2006/1/20 10:28 Cygwin DLL version info: DLL version: 1.5.19 DLL epoch: 19 DLL bad signal mask: 19005 DLL old termios: 5 DLL malloc env: 28 API major: 0 API minor: 150 Shared data: 4 DLL identifier: cygwin1 Mount registry: 2 Cygnus registry name: Cygnus Solutions Cygwin registry name: Cygwin Program options name: Program Options Cygwin mount registry name: mounts v2 Cygdrive flags: cygdrive flags Cygdrive prefix: cygdrive prefix Cygdrive default prefix: Build date: Fri Jan 20 13:28:43 EST 2006 CVS tag: cr-0x5ef Shared id: cygwin1S4 243k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygdps-1.dll - os=4.0 img=1.0 sys=4.0 "cygdps-1.dll" v0.0 ts=2005/2/23 6:42 26k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygdpstk-1.dll - os=4.0 img=1.0 sys=4.0 "cygdpstk-1.dll" v0.0 ts=2005/2/23 6:42 28k 2004/03/31 C:\cygwin\usr\X11R6\bin\cygDtPrint-1.dll - os=4.0 img=1.0 sys=4.0 "cygDtPrint-1.dll" v0.0 ts=2004/3/30 20:23 21k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygfontenc-1.dll - os=4.0 img=1.0 sys=4.0 "cygfontenc-1.dll" v0.0 ts=2005/2/23 6:45 282k 2003/10/28 C:\cygwin\usr\X11R6\bin\cygfreetype-9.dll - os=4.0 img=1.0 sys=4.0 "cygfreetype-9.dll" v0.0 ts=2003/10/17 23:44 36k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygFS-6.dll - os=4.0 img=1.0 sys=4.0 "cygFS-6.dll" v0.0 ts=2005/2/23 6:34 358k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygGL-1.dll - os=4.0 img=1.0 sys=4.0 "cygGL-1.dll" v0.0 ts=2005/2/23 6:39 438k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygGLU-1.dll - os=4.0 img=1.0 sys=4.0 "cygGLU-1.dll" v0.0 ts=2005/2/23 6:41 140k 2004/08/06 C:\cygwin\usr\X11R6\bin\cygglut-3.dll - os=4.0 img=1.0 sys=4.0 "cygglut-3.dll" v0.0 ts=2004/8/6 7:43 75k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygICE-6.dll - os=4.0 img=1.0 sys=4.0 "cygICE-6.dll" v0.0 ts=2005/2/23 6:28 77k 2004/03/31 C:\cygwin\usr\X11R6\bin\cygMrm-2.dll - os=4.0 img=1.0 sys=4.0 "cygMrm-2.dll" v0.0 ts=2004/3/30 20:23 9k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygoldX-6.dll - os=4.0 img=1.0 sys=4.0 "cygoldX-6.dll" v0.0 ts=2005/2/23 6:28 1413k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygOSMesa-4.dll - os=4.0 img=1.0 sys=4.0 "cygOSMesa-4.dll" v0.0 ts=2005/2/23 6:39 41k 2002/05/14 C:\cygwin\usr\X11R6\bin\cygPropList-0.dll - os=4.0 img=1.0 sys=4.0 "cygPropList-0.dll" v0.0 ts=2002/5/13 20:13 20k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygpsres-1.dll - os=4.0 img=1.0 sys=4.0 "cygpsres-1.dll" v0.0 ts=2005/2/23 6:42 30k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygSM-6.dll - os=4.0 img=1.0 sys=4.0 "cygSM-6.dll" v0.0 ts=2005/2/23 6:28 66k 2004/03/31 C:\cygwin\usr\X11R6\bin\cygUil-2.dll - os=4.0 img=1.0 sys=4.0 "cygUil-2.dll" v0.0 ts=2004/3/30 20:23 877k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygX11-6.dll - os=4.0 img=1.0 sys=4.0 "cygX11-6.dll" v0.0 ts=2005/2/23 6:28 254k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXaw-6.dll - os=4.0 img=1.0 sys=4.0 "cygXaw-6.dll" v0.0 ts=2005/2/23 6:31 356k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXaw-7.dll - os=4.0 img=1.0 sys=4.0 "cygXaw-7.dll" v0.0 ts=2005/2/23 6:32 363k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXaw-8.dll - os=4.0 img=1.0 sys=4.0 "cygXaw-8.dll" v0.0 ts=2005/2/23 6:33 275k 2004/01/13 C:\cygwin\usr\X11R6\bin\cygXaw3d-7.dll - os=4.0 img=1.0 sys=4.0 "cygXaw3d-7.dll" v0.0 ts=2004/1/13 14:17 9k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXcomposite-1.dll - os=4.0 img=1.0 sys=4.0 "cygXcomposite-1.dll" v0.0 ts=2005/2/23 6:44 30k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXcursor-1.dll - os=4.0 img=1.0 sys=4.0 "cygXcursor-1.dll" v0.0 ts=2005/2/23 6:43 9k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXdamage-1.dll - os=4.0 img=1.0 sys=4.0 "cygXdamage-1.dll" v0.0 ts=2005/2/23 6:44 7k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXevie-1.dll - os=4.0 img=1.0 sys=4.0 "cygXevie-1.dll" v0.0 ts=2005/2/23 6:43 49k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXext-6.dll - os=4.0 img=1.0 sys=4.0 "cygXext-6.dll" v0.0 ts=2005/2/23 6:28 16k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXfixes-3.dll - os=4.0 img=1.0 sys=4.0 "cygXfixes-3.dll" v0.0 ts=2005/2/23 6:43 56k 2004/03/11 C:\cygwin\usr\X11R6\bin\cygXft-1.dll - os=4.0 img=1.0 sys=4.0 "cygXft-1.dll" v0.0 ts=2003/11/17 17:42 63k 2004/03/23 C:\cygwin\usr\X11R6\bin\cygXft-2.dll - os=4.0 img=1.0 sys=4.0 "cygXft-2.dll" v0.0 ts=2004/3/23 14:20 27k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXi-6.dll - os=4.0 img=1.0 sys=4.0 "cygXi-6.dll" v0.0 ts=2005/2/23 6:34 125k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygxkbfile-1.dll - os=4.0 img=1.0 sys=4.0 "cygxkbfile-1.dll" v0.0 ts=2005/2/23 6:34 12k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygxkbui-1.dll - os=4.0 img=1.0 sys=4.0 "cygxkbui-1.dll" v0.0 ts=2005/2/23 6:34 1294k 2004/03/31 C:\cygwin\usr\X11R6\bin\cygXm-2.dll - os=4.0 img=1.0 sys=4.0 "cygXm-2.dll" v0.0 ts=2004/3/30 20:20 459k 2004/02/10 C:\cygwin\usr\X11R6\bin\cygXmHTML-0.dll - os=4.0 img=1.0 sys=4.0 "cygXmHTML-0.dll" v0.0 ts=2004/2/10 12:14 76k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXmu-6.dll - os=4.0 img=1.0 sys=4.0 "cygXmu-6.dll" v0.0 ts=2005/2/23 6:30 11k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXmuu-1.dll - os=4.0 img=1.0 sys=4.0 "cygXmuu-1.dll" v0.0 ts=2005/2/23 6:30 26k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXp-6.dll - os=4.0 img=1.0 sys=4.0 "cygXp-6.dll" v0.0 ts=2005/2/23 6:31 52k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXpm-4.dll - os=4.0 img=1.0 sys=4.0 "cygXpm-4.dll" v0.0 ts=2005/2/23 6:30 12k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXrandr-2.dll - os=4.0 img=1.0 sys=4.0 "cygXrandr-2.dll" v0.0 ts=2005/2/23 6:43 28k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXrender-1.dll - os=4.0 img=1.0 sys=4.0 "cygXrender-1.dll" v0.0 ts=2005/2/23 6:42 8k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXRes-1.dll - os=4.0 img=1.0 sys=4.0 "cygXRes-1.dll" v0.0 ts=2005/2/23 6:43 40k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygxrx-6.dll - os=4.0 img=1.0 sys=4.0 "cygxrx-6.dll" v0.0 ts=2005/2/23 6:53 25k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygxrxnest-6.dll - os=4.0 img=1.0 sys=4.0 "cygxrxnest-6.dll" v0.0 ts=2005/2/23 6:53 282k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXt-6.dll - os=4.0 img=1.0 sys=4.0 "cygXt-6.dll" v0.0 ts=2005/2/23 6:29 27k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXTrap-6.dll - os=4.0 img=1.0 sys=4.0 "cygXTrap-6.dll" v0.0 ts=2005/2/23 6:43 17k 2005/02/23 C:\cygwin\usr\X11R6\bin\cygXtst-6.dll - os=4.0 img=1.0 sys=4.0 "cygXtst-6.dll" v0.0 ts=2005/2/23 6:34 578k 2006/03/24 C:\cygwin\lib\lapack\cygblas.dll - os=4.0 img=1.0 sys=4.0 "cygblas.dll" v0.0 ts=2006/3/23 21:30 4887k 2006/03/24 C:\cygwin\lib\lapack\cyglapack.dll - os=4.0 img=1.0 sys=4.0 "cyglapack.dll" v0.0 ts=2006/3/23 21:30 Service : sshd Display name : CYGWIN sshd Current State : Stopped Command : /usr/sbin/sshd -D stdin path : /dev/null stdout path : /var/log/sshd.log stderr path : /var/log/sshd.log Environment : CYGWIN="'ntsec notraverse'" Process Type : Own Process Startup : Automatic Account : LocalSystem Cygwin Package Information Last downloaded files to: C:\cygwin Last downloaded files from: http://mirrors.kernel.org/sources.redhat.com/cygwin Package Version _update-info-dir 00405-1 a2ps 4.13-1 aalib 1.4rc5-1 aalib-devel 1.4rc5-1 agetty 2.1-2 alternatives 1.3.20a-2 antiword 0.34-2 apache 1.3.33-2 apache2 2.2.2-1 apache2-devel 2.2.2-1 apache2-manual 2.2.2-1 apr 0.9.7-1 apr-util 0.9.7-1 apr1 1.2.7-1 aprutil1 1.2.7-1 ash 20040127-3 aspell 0.50.3-1 aspell-de 0.50.2-1 aspell-dev 0.50.3-1 aspell-doc 0.50.3-1 aspell-en 0.51.0-1 aspell-pl 0.50.2-1 astyle 1.15.3-3 atk 1.9.1-1 atk-devel 1.9.1-1 atk-doc 1.9.1-1 atk-runtime 1.9.1-1 audiofile 0.2.6-2 autoconf 2.59-2 autoconf-devel 2.59-2 autoconf-stable 2.13-6 autoconf2.1 2.13-1 autoconf2.5 2.59-2 automake 1.7.9-2 automake-devel 1.9.2-2 automake-stable 1.4p6-3 automake1.4 1.4p6-3 automake1.5 1.5-1 automake1.6 1.6.3-2 automake1.7 1.7.9-2 automake1.8 1.8.5-2 automake1.9 1.9.6-1 autossh 1.4-1 base-files 3.7-1 base-passwd 2.2-1 bash 3.1-6 bash-completion 20060301-1 bashdb 3.1_0.05-1 bashdb3 0.02-1 bc 1.06-2 binutils 20050610-1 bison 2.1-1 boost 1.33.1-2 boost-devel 1.33.1-2 bsflite 0.81p2-1 byacc 1.9-1 bzip2 1.0.3-1 bzr 0.8.2-1 c-client 2002e-3 c3270 3.3.4p7-1 cabextract 1.1-1 cadaver 0.22.2-1 cairo 1.0.2-1 cairo-doc 1.0.2-1 catgets 1.0-1 ccache 2.2-1 ccdoc 0.8.41-2 ccrypt 1.7-1 cgoban 1.9.14-2 check 0.9.1-1 checkx 0.1.0-1 chere 0.6-4 chkconfig 1.2.24h-1 clamav 0.88.2-1 clear 1.0-2 clisp 2.38-1 cmake 2.4.2-1 cocom 0.995-1 compface 1.5.2-1 coreutils 5.97-1 cpio 2.6-5 cppunit 1.9.14-1 cramfs 1.1-1 cron 3.0.1-19 crypt 1.1-1 ctags 5.6-1 ctetris 0.30-1 curl 7.15.4-1 curl-devel 7.15.4-1 cvs 1.11.17-1 cvsutils 0.2.3-1 cygipc 2.03-2 cygport 0.1.93-1 cygrunsrv 1.17-1 cygutils 1.3.0-1 cygwin 1.5.20-1 cygwin-doc 1.4-3 cygwin-x-doc 1.0.4-1 cyrus-sasl 2.1.19-3 d 1.2.0-1 db2 2.7.7-4 db3.1 3.1.17-2 db4.1 4.1.25-1 db4.2 4.2.52-1 db4.3 4.3.28-1 ddd 3.3.9-1 dejagnu 20021217-2 desktop-file-utils 0.10-1 diff 1.0-1 diffstat 1.42-2 diffutils 2.8.7-1 distcc 2.18.3-1 dmalloc 5.4.2-1 docbook-xml412 4.1.2-1 docbook-xml42 4.2-3 docbook-xml43 4.3-1 docbook-xml44 4.4-1 docbook-xsl 1.69.1-1 doxygen 1.4.6-1 dpkg 1.10.4-2 e2fsimage 0.2.0-2 e2fsprogs 1.35-3 ec-fonts-mftraced 1.0.8-4 ed 0.2-1 editrights 1.01-1 ELFIO 1.0.2-1 emacs 21.2-13 emacs-el 21.2-13 emacs-leim 21.3.50-2 emacs-X11 21.2-13 email 2.5.0-1 enscript 1.6.4-1 epstool 3.08-1 esound 0.2.36-1 exif 0.6.9-2 exim 4.62-1 expat 1.95.8-1 expect 20030128-1 fetchmail 6.3.1-1 fftw3 3.0.1-2 fftw3-dev 3.0.1-2 fftw3-doc 3.0.1-2 figlet 2.2-1 file 4.16-1 fileutils 4.1-3 findutils 4.2.27-1 flac 1.1.2-1 flac-devel 1.1.2-1 flex 2.5.4a-3 fltk 1.1.4-2 fontconfig 2.2.2-1 fortune 1.99.1-1 freeglut 2.2.0-1 freetype2 2.1.9-1 fvwm 2.4.7-3 gail 1.8.8-1 gawk 3.1.5-4 gcc 3.4.4-1 gcc-ada 3.4.4-1 gcc-core 3.4.4-1 gcc-g++ 3.4.4-1 gcc-g77 3.4.4-1 gcc-gdc 3.4.4-1 gcc-gm2 3.3.3-1 gcc-gpc 3.3.3-3 gcc-java 3.4.4-1 gcc-mingw 20040810-1 gcc-mingw-ada 20050522-1 gcc-mingw-core 20050522-1 gcc-mingw-g++ 20050522-1 gcc-mingw-g77 20050522-1 gcc-mingw-gdc 20050522-1 gcc-mingw-gpc 20040810-1 gcc-mingw-java 20050522-1 gcc-mingw-objc 20050522-1 gcc-objc 3.4.4-1 gcc2 2.95.3-10 GConf2 2.10.1-1 gd 2.0.33-1 gdb 20060706-2 gdbm 1.8.3-7 gdk-pixbuf 0.22.0-4 gdk-pixbuf-devel 0.22.0-4 gdk-pixbuf-doc 0.22.0-4 geoip 1.3.14-1 gettext 0.14.5-1 gettext-devel 0.14.5-1 ghostscript 8.50-1 ghostscript-base 8.50-1 ghostscript-x11 8.50-1 glib 1.2.10-3 glib-devel 1.2.10-3 glib2 2.6.6-2 glib2-devel 2.6.6-2 glib2-doc 2.6.6-2 glib2-runtime 2.6.6-2 glitz 0.4.4-2 gmp 4.1.4-2 gnome-common 2.12.0-1 gnome-icon-theme 2.10.1-1 gnome-keyring 0.4.7-1 gnome-libs 1.4.2-3 gnome-libs-devel 1.4.2-3 gnome-libs-doc 1.4.2-3 gnome-mime-data 2.4.2-1 gnome-themes 2.12.3-1 gnome-vfs2 2.12.2-1 gnome-vfs2-devel 2.12.2-1 gnome-vfs2-doc 2.12.2-1 gnubg 0.14.3-1 gnugo 3.7.10-1 gnupg 1.4.2.1-1 gnuplot 4.0.0-1 gnutls 1.0.25-2 gnutls-devel 1.0.25-2 gnutls-doc 1.0.25-2 gperf 2.7.2-1 grace 5.1.19-1 GraphicsMagick 1.0.6-1 grep 2.5.1a-2 groff 1.18.1-2 gsl 1.8-1 gsl-apps 1.8-1 gsl-devel 1.8-1 gsl-doc 1.8-1 gtk+ 1.2.10-2 gtk+-devel 1.2.10-2 gtk-doc 1.3-1 gtk-engines 0.12-2 gtk2-x11 2.6.10-1 gtk2-x11-devel 2.6.10-1 gtk2-x11-doc 2.6.10-1 gtk2-x11-engines 2.6.7-1 gtk2-x11-runtime 2.6.10-1 gtypist 2.7-2 guile 1.6.7-4 guile-devel 1.6.7-4 guile-doc 1.6.7-4 gv 3.6.1-1 gvim 6.4-1 gzip 1.3.5-2 help2man 1.35.1-1 hexedit 1.2.10-1 hicolor-icon-theme 0.5-1 httptunnel 3.3-1 ImageMagick 6.0.4-1 imlib 1.9.14-3 indent 2.2.9-1 inetutils 1.3.2-35 initscripts 0.9-1 intltool 0.33-1 ioperm 0.4-1 irc 20010101-3 jasper 1.701.0-1 jbigkit 1.5-3 jgraph 8.3-1 jikes 1.22-1 joe 3.4-1 jpeg 6b-11 keychain 2.5.3.1-1 lablgtk2 2.4.0-2 lapack 3.0-5 lcms 1.14-1 less 381-1 lesstif 0.93.94-2 lftp 2.6.10-2 libaa1 1.4rc5-1 libao 0.8.6-1 libao-devel 0.8.6-1 libao2 0.8.6-1 libapr0 0.9.7-1 libapr1 1.2.7-1 libaprutil0 0.9.7-1 libaprutil1 1.2.7-1 libart_lgpl 1.4.2-3 libart_lgpl2 2.3.17-1 libaspell15 0.50.3-1 libaudiofile-devel 0.2.6-2 libaudiofile0 0.2.6-2 libbonobo2 2.10.1-1 libbonobo2-devel 2.10.1-1 libbonobo2-doc 2.10.1-1 libbonobo20 2.10.1-1 libbonoboui2 2.10.1-1 libbz2_0 1.0.2-1 libbz2_1 1.0.3-1 libcairo2 1.0.2-1 libcharset1 1.9.2-2 libcroco 0.5.1-2 libcroco06 0.6.0-1 libcurl2 7.11.1-3 libcurl3 7.15.4-1 libdb2 2.7.7-4 libdb2-devel 2.7.7-4 libdb3.1 3.1.17-2 libdb3.1-devel 3.1.17-2 libdb4.1 4.1.25-1 libdb4.1-devel 4.1.25-1 libdb4.2 4.2.52-1 libdb4.2-devel 4.2.52-1 libdb4.3 4.3.28-1 libdb4.3-devel 4.3.28-1 libEMF 1.0.3-1 libEMF-devel 1.0.3-1 libEMF1 1.0.3-1 libesound-devel 0.2.36-1 libesound0 0.2.36-1 libexif 0.6.12-1 libexif10 0.6.9-2 libFLAC++5 1.1.2-1 libFLAC7 1.1.2-1 libfontconfig-devel 2.2.2-1 libfontconfig1 2.2.2-1 libfpx 1.2.0.12-1 libfreetype2-devel 2.1.9-1 libfreetype26 2.1.9-1 libgc 6.4-1 libgcrypt 1.2.1-1 libgd-devel 2.0.33-1 libgd2 2.0.33-1 libgdbm 1.8.0-5 libgdbm-devel 1.8.3-7 libgdbm3 1.8.3-3 libgdbm4 1.8.3-7 libgeotiff 1.2.2-1 libgeotiff-devel 1.2.2-1 libgeotiff1 1.2.2-1 libgettextpo0 0.14.5-1 libggi2 2.2.1-1 libggi2-devel 2.2.1-1 libggi2-display-aa 2.2.1-1 libggi2-display-file 2.2.1-1 libggi2-display-terminfo 2.2.1-1 libggi2-display-x 2.2.1-1 libggi2-samples 2.2.1-1 libggimisc2 2.2.1-1 libggimisc2-devel 2.2.1-1 libggimisc2-samples 2.2.1-1 libggiwmh0 0.3.1-1 libggiwmh0-devel 0.3.1-1 libggiwmh0-display-x 0.3.1-1 libggiwmh0-samples 0.3.1-1 libgii1 1.0.1-1 libgii1-devel 1.0.1-1 libgii1-input-x 1.0.1-1 libglade2 2.5.1-1 libglitz-glx1 0.4.4-2 libglitz1 0.4.4-2 libgnome 1.4.2-3 libgnome2 2.12.0.1-1 libgnome2-devel 2.12.0.1-1 libgnome2-doc 2.12.0.1-1 libgnomecanvas2 2.12.0-1 libgnomecanvas2-devel 2.12.0-1 libgnomecanvas2-doc 2.12.0-1 libgnomecanvaspixbuf 0.22.0-4 libgnomeprint22 2.10.3-1 libgnomeprintui22 2.10.2-1 libgnomesupport 1.4.2-3 libgnomeui 1.4.2-3 libgnomeui2 2.12.1-1 libgnomeui2-devel 2.12.1-1 libgnomeui2-doc 2.12.1-1 libgnorba 1.4.2-3 libgnutls11 1.0.25-2 libgpg-error 1.1-1 libGraphicsMagick-devel 1.0.6-1 libGraphicsMagick0 1.0.6-1 libgtkhtml2 2.6.3-2 libgtkhtml2-devel 2.6.3-2 libgtkxmhtml 1.4.2-3 libguile12 1.6.7-4 libguile12abi13 1.6.4-3 libguile14 1.5.6-5 libguile16 1.7.1.20041006-1 libiconv 1.9.2-2 libiconv2 1.9.2-2 libIDL 0.5.17-2 libIDL2 0.8.6-1 libintl 0.10.38-3 libintl1 0.10.40-1 libintl2 0.12.1-3 libintl3 0.14.5-1 libjpeg62 6b-11 libjpeg6b 6b-8 libkpathsea3 2.0.2-15 libkpathsea3abi13 2.0.2-2 libkpathsea4 3.0.0-3 libltdl3 1.5.22-1 libltdl6 1.9f_20041024-1 libMagick-devel 6.0.4-1 libMagick6 6.0.4-1 libmcrypt 2.5.7-2 libmcrypt-devel 2.5.7-2 libmng 1.0.9-1 libncurses-devel 5.5-2 libncurses5 5.2-1 libncurses6 5.2-8 libncurses7 5.3-4 libncurses8 5.5-2 libneon24 0.24.7-2 libneon25 0.25.5-1 libnetpbm-devel 10.30-1 libnetpbm10 10.30-1 libogg 1.1.2-1 libogg-devel 1.1.2-1 libogg0 1.1.2-1 libOggFLAC++2 1.1.2-1 libOggFLAC3 1.1.2-1 libopencdk8 0.5.7-1 libopenldap2 2.1.25-1 libopenldap2_2_7 2.2.26-2 libpcre 4.1-2 libpcre0 6.3-1 libplot2 2.4.1-1 libploticus 2.32-1 libplotter2 2.4.1-1 libpng 1.2.8-2 libpng10 1.0.18-2 libpng10-devel 1.0.18-2 libpng12 1.2.8-2 libpng12-devel 1.2.8-2 libpng2 1.0.12-1 libpopt0 1.6.4-4 libproj-devel 4.4.8-1 libproj0 4.4.8-1 libPropList 0.10.1-3 libreadline4 4.1-2 libreadline5 4.3-5 libreadline6 5.1-5 libsasl2 2.1.19-3 libsasl2-devel 2.1.19-3 libsmi 0.4.2-1 libspeex1 1.1.10-1 libtasn1 0.2.15-1 libtiff-devel 3.7.3-1 libtiff3 3.6.0-2 libtiff4 3.6.0-5 libtiff5 3.7.3-1 libtool 1.5b-2 libtool-devel 1.5.10-2 libtool-stable 1.4.3-3 libtool1.5 1.5.22-1 libungif 4.1.4-1 libungif4 4.1.4-1 libusb-win32 0.1.10.1-3 libvorbis 1.1.1-1 libvorbis-devel 1.1.1-1 libvorbis0 1.1.1-1 libvorbisenc2 1.1.1-1 libvorbisfile3 1.1.1-1 libwmf 0.2.8.4-1 libwnck 2.12.3-1 libwnck-devel 2.12.3-1 libwnck-doc 2.12.3-1 libwnck1_18 2.12.3-1 libxerces-c21 2.1.0-1 libxerces-c22 2.2.0-1 libxerces-c23 2.3.0-4 libxerces-c24 2.4.0-4 libxerces-c25 2.5.0-1 libXft 2.1.6-1 libXft-devel 2.1.6-1 libXft1 1.0.0-1 libXft2 2.1.6-1 libxmi0 2.4.1-1 libxml 1.8.17-2 libxml2 2.6.22-1 libxml2-devel 2.6.22-1 libxml2-doc 2.6.22-1 libxml2-python 2.6.22-1 libxslt 1.1.15-2 libzvt 1.4.2-3 lighttpd 1.4.9-1 lilypond 2.6.4-1 lilypond-doc 2.6.4-1 links 0.99pre14-1 login 1.9-7 lynx 2.8.5-4 m4 1.4.4-1 make 3.80-1 man 1.5p-1 mathomatic 12.5.17-1 mc 4.6.1-2 mhash 0.9.2-1 mhash-devel 0.9.1-1 mined 2000.12-3 mingw-bzip2 1.0.3-1 mingw-libbz2_1 1.0.3-1 mingw-runtime 3.10-1 mingw-zlib 1.2.2-2 minires 1.00-1 minires-devel 1.00-1 mktemp 1.5-3 mod_auth_mysql 1.11-1 mod_auth_ntsec 1.7-1 mod_dav 1.0.3-1.3.6-1 mod_php4 4.2.0-2 mod_ssl 2.8.8-1.3.24-1 monotone 0.27-1 more 2.11o-3 mt 2.3.1-1 mtd 20050419-1 mutt 1.4.2.1i-1 naim 0.11.8.2-1 nano 1.2.2-1 nasm 0.98.39-1 ncftp 3.1.7-1 ncurses 5.5-2 ncurses-demo 5.5-2 nedit 5.5-1 neon 0.25.5-1 netcat 1.10-2 netpbm 10.30-1 netpbm-doc 10.30-1 newlib-man 20020801 nfs-server 2.3-4 Numeric 24.2-1 ocaml 3.08.1-1 octave 2.1.73-1 octave-doc 2.1.73-1 octave-forge 2006.03.17-1 octave-headers 2.1.73-1 octave-htmldoc 2.1.73-1 octave-info 2.1.73-1 octave-otags 2.1.73-1 openbox 0.99.1-4 opencdk 0.5.7-1 opengl 1.1.0-8 openjade 1.3.3-1 openldap 2.2.26-2 openldap-devel 2.2.26-2 OpenSP 1.5.1-1 openssh 4.3p2-3 openssl 0.9.8b-1 openssl-devel 0.9.8b-1 openssl096 0.9.6j-1 openssl097 0.9.7j-1 ORBit 0.5.17-2 ORBit-devel 0.5.17-2 ORBit2 2.12.3-1 ORBit2-devel 2.12.3-1 orpie 1.4.3-1 pango 1.8.1-1 pango-devel 1.8.1-1 pango-doc 1.8.1-1 pango-runtime 1.8.1-1 par 1.52-1 patch 2.5.8-8 patchutils 0.2.31-1 pcre 6.3-1 pcre-devel 6.3-1 pcre-doc 6.3-1 pdksh 5.2.14-3 perl 5.8.7-5 perl-ExtUtils-Depends 0.205-1 perl-ExtUtils-PkgConfig 1.07-1 perl-libwin32 0.26-1 perl-Tk 804.027-4 perl-Win32-GUI 1.03-1 perl_manpages 5.8.7-5 pine 4.58-1 pinfo 0.6.8-1 ping 1.0-1 pkg-config 0.20-1 pkgconfig 0.17.2-3 ploticus 2.32-1 ploticus-common 2.32-1 ploticus-doc 2.32-1 plotutils 2.4.1-1 plotutils-devel 2.4.1-1 plotutils-doc 2.4.1-1 popt 1.6.4-4 postgresql 8.0.7-1 pr3270 3.2.20-1 pr3287 3.3.4p7-1 procmail 3.22-10 procps 3.2.6-1 proftpd 1.2.10-1 proj 4.4.8-1 psmisc 21.5-2 pstoedit 3.42-1 pstoedit-devel 3.42-1 psutils 1.17-1 pygtk2 2.6.3-1 python 2.4.3-1 qt3 3.3.4-2 qt3-bin 3.3.4-2 qt3-devel 3.3.4-2 qt3-doc 3.3.4-2 qt_2 2.3.1-b2 quilt 0.43-1 rcs 5.7-3 readline 5.1-5 rebase 2.4.2-1 regex 4.4-4 robots 2.0-4 rpm 4.1-2 rpm-build 4.1-1 rpm-doc 4.1-1 rsync 2.6.6-1 ruby 1.8.4-1 run 1.1.10-1 rxvt 20050409-3 rxvt-unicode-common 7.7-4 rxvt-unicode-X 7.7-4 s3270 3.3.4p7-1 sed 4.1.5-1 setsid 0.0-4 sh-utils 2.0.15-5 shared-mime-info 0.16-1 sharutils 4.5.3-1 shutdown 1.7-1 singular-base 3.0.1-1 singular-help 3.0.1-1 singular-icons 3.0.1-1 singular-share 3.0.1-1 singular-surf 3.0.0-2 smartmontools 5.36-1 speex 1.1.10-1 speex-devel 1.1.10-1 splint 3.1.1-1 squid 2.4.STABLE7-1 ssmtp 2.60.9-3 startup-notification 0.8-1 stow 1.3.3-1 stunnel 4.14-2 subversion 1.3.0-1 subversion-apache2 1.3.0-1 subversion-book 1.2.3-1 subversion-devel 1.3.0-1 subversion-perl 1.3.0-1 subversion-python 1.3.0-1 subversion-ruby 1.3.0-1 suite3270 3.3.4p7-1 sunrpc 4.0-3 SWI-Prolog 5.2.6-1 swig 1.3.29-2 syslog-ng 1.6.11-1 sysvinit 2.84-4 t1lib 5.1.0-1 t1lib-x11 5.1.0-1 tar 1.15.1-4 tcl3270 3.3.4p7-1 tcltk 20060202-1 tcm 2.20-1 tcp_wrappers 7.6-1 tcsh 6.14.00-5 termcap 20050421-1 terminfo 5.5_20060323-1 tetex 3.0.0-3 tetex-base 3.0.0-3 tetex-beta 20020911-1 tetex-bin 3.0.0-3 tetex-devel 3.0.0-3 tetex-doc 3.0.0-3 tetex-extra 3.0.0-3 tetex-tiny 3.0.0-3 tetex-x11 3.0.0-3 texi2html 1.76-1 texinfo 4.8-3 TeXmacs 1.0.6-1 texmf 20020911-1 texmf-base 20020911-1 texmf-doc 20020911-1 texmf-extra 20020911-1 texmf-tiny 20020911-1 textutils 2.0.21-2 tidy 041206-1 tiff 3.7.3-1 time 1.7-1 tin 1.8.2-1 tinyirc 1.1-1 tnef 1.3.4-1 transfig 3.2.4-2 ttcp 19980512-1 typespeed 0.4.4-2 tzcode 2005r-2 ucl 1.01-1 unison 2.10.2-4 unison2.10.2 2.10.2-6 unison2.12.0 2.12.0-4 unison2.13 2.13.16-1 unison2.17 2.17.1-1 unison2.9.1 2.9.1-3 unison2.9.20 2.9.20-3 units 1.77-1 unzip 5.50-5 upx 1.24-1 util-linux 2.12r-2 uw-imap 2002e-3 uw-imap-imapd 2002e-3 uw-imap-util 2002e-3 vim 7.0.035-1 vorbis-tools 1.1.1-5 w32api 3.7-1 w3m 0.5.1-1 wget 1.10.2-1 which 1.7-1 whois 4.7.11-1 WindowMaker 0.90.0-2 WordNet 2.1-1 wtf 0.0.4-6 X-start-menu-icons 1.0.4-1 X-startup-scripts 1.0.11-1 X11 2.2.2-1 x2x 1.30-2 x3270 3.3.4p7-1 Xaw3d 1.5D-5 xemacs 21.4.19-1 xemacs-emacs-common 21.4.19-1 xemacs-mule-sumo 2005-12-08-1 xemacs-sumo 2005-12-08-1 xemacs-tags 21.4.19-1 xerces-c 2.5.0-1 xerces-c-devel 2.5.0-1 xerces-c-doc 2.5.0-1 xfig 3.2.4-6 xfig-base 3.2.4-1 xfig-bin 3.2.4-3 xfig-doc 3.2.4-2 xfig-etc 3.2.4-4 xfig-lib 3.2.4-6 xfig-man 3.2.4-2 XFree86-base 4.3.0-11 XFree86-bin 4.3.0-21 XFree86-bin-icons 4.3.0-7 XFree86-doc 4.3.0-2 XFree86-etc 4.3.0-12 XFree86-f100 4.3.0-2 XFree86-fcyr 4.3.0-2 XFree86-fenc 4.3.0-2 XFree86-fnts 4.3.0-2 XFree86-fscl 4.3.0-2 XFree86-fsrv 4.3.0-9 XFree86-html 4.3.0-10 XFree86-jdoc 4.3.0-2 XFree86-lib 4.3.0-3 XFree86-lib-compat 4.3.0-2 XFree86-man 4.3.0-10 XFree86-nest 4.3.0-8 XFree86-prog 4.3.0-21 XFree86-prt 4.3.0-6 XFree86-ps 4.3.0-2 XFree86-startup-scripts 4.3.0-1 XFree86-vfb 4.3.0-8 XFree86-xserv 4.3.0-68 XFree86-xwinclip 4.3.0-3 xgraph 12.1-1 xinetd 2.3.9-1 XmHTML 1.1.7-1 xmlto 0.0.18-1 xmon 1.5.6-1 xorg-x11-base 6.8.2.0-1 xorg-x11-bin 6.8.2.0-1 xorg-x11-bin-dlls 6.8.2.0-1 xorg-x11-bin-lndir 6.8.2.0-1 xorg-x11-devel 6.8.2.0-2 xorg-x11-etc 6.8.2.0-1 xorg-x11-f100 6.8.1.0-3 xorg-x11-fcyr 6.8.1.0-2 xorg-x11-fenc 6.8.1.0-2 xorg-x11-fnts 6.8.1.0-3 xorg-x11-fscl 6.8.1.0-2 xorg-x11-fsrv 6.8.2.0-1 xorg-x11-libs-data 6.8.2.0-1 xorg-x11-man-pages 6.8.2.0-1 xorg-x11-man-pages-html 6.8.2.0-1 xorg-x11-nest 6.8.2.0-2 xorg-x11-vfb 6.8.2.0-2 xorg-x11-xwin 6.8.2.0-4 xorg-x11-xwin-gl 6.8.2.0-4 xpdf 3.01-2 xpm-nox 4.2.0-5 xsri 2.1.0-1 xterm 202-1 xwinclip 1.2.0-1 xwinwm 0.0.5-1 zip 2.3-6 zlib 1.2.3-1 zsh 4.2.6-1 Use -h to see help about each section -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From corinna-cygwin@cygwin.com Sat Jul 8 16:08:00 2006 From: corinna-cygwin@cygwin.com (Corinna Vinschen) Date: Sat, 08 Jul 2006 16:08:00 -0000 Subject: unixkill crashes under cygwin-1.5.20-1 (and cygwin1dll-20060707) In-Reply-To: <20060708153201.GA1476@ingber.com> References: <20060708153201.GA1476@ingber.com> Message-ID: <20060708160836.GB18873@calimero.vinschen.de> On Jul 8 08:32, Lester Ingber wrote: > Corinna: > > I don't understand why I do not have any such crashes under > cygwin1dll-1.5.19, but only with cygwin1dll-1.5.20-1 and the latest > snapshot cygwin1dll-20060707? May I guess you didn't debug this situation? I did. Trust me. Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Project Co-Leader cygwin AT cygwin DOT com Red Hat -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Mon Jul 10 02:31:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Mon, 10 Jul 2006 02:31:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 In-Reply-To: <44ADC48B.8040509@cygwin.com> Message-ID: -----Original Message----- >From: Larry Hall (Cygwin X) >Sent: Thursday, July 06, 2006 10:19 PM >To: The Cygwin/X Maiming List (ha-ha) >Subject: Re: Cygwin/X does not start after updating Cygwin1.dll to >1.5.20-1 > > >Charli Li wrote: >> >> Searching Local Harddrives (C:;D:)... >> Cygwin1.dll found in D:\XXXXXXXXXX\cygwin\bin >> Cygwin1.dll found in D:\XXXXXXXXXX\cygwin\usr\X11R6\bin >> Select an item to view its description. >> >> Both of these dirs are in $PATH. So, here we are at the xterm: >> >> (cl@xxxxxxxxxx)[27] ~ >> $ >> >> ...and we check the $PATH: >> >> (cl@xxxxxxxxxx)[27] ~ >> $ cat $PATH >> cat: >> >/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:./:/cygdrive/d/xxxxxxxx >xx/pfiles >> /Microsoft Visual >Studio/Common7/IDE:/cygdrive/d/xxxxxxxxxx/pfiles/Microsoft >> Visual Studio/VC/bin:/cygdrive/d/xxxxxxxxxx/pfiles/Microsoft Visual >> Studio/Common7/tools File name too long >> >> That was only a snippet of what I had in my $PATH. So this may mean that >> somehow, Cygwin1.dll may have been COPIED into the >/usr/X11R6/bin dir. Does >> setup.exe have that behaviour to do that? >> > >No, setup.exe won't do that. It must have gotten there through >other means. >Delete the one in /usr/X11R6/bin. If you have further >difficulties that you >wish to contact the list about, please read and follow the problem >reporting >guidelines found here: > >Problem reports: http://cygwin.com/problems.html > >Also, if any further problem you experience is not Cygwin-X specific, the >general Cygwin list will get you more exposure. > >-- >Larry Hall http://www.rfk.com >RFK Partners, Inc. (508) 893-9779 - RFK Office >216 Dalton Rd. (508) 893-9889 - FAX >Holliston, MA 01746 > Good news: * Sucessful startup after removing Cygwin1.dll from /usr/X11R6/bin * DLL in /usr/X11R6/bin was version 1.5.19-4 ** Last modified sometime in January 2006 *** (Way before 1.5.20-1 update) Charli -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From cgf-no-personal-reply-please@cygwin.com Mon Jul 10 02:41:00 2006 From: cgf-no-personal-reply-please@cygwin.com (Christopher Faylor) Date: Mon, 10 Jul 2006 02:41:00 -0000 Subject: Cygwin/X does not start after updating Cygwin1.dll to 1.5.20-1 In-Reply-To: References: <44ADC48B.8040509@cygwin.com> Message-ID: <20060710024107.GB18037@trixie.casa.cgf.cx> On Sun, Jul 09, 2006 at 10:33:03PM -0400, Charli Li wrote: >Good news: >* Sucessful startup after removing Cygwin1.dll from /usr/X11R6/bin >* DLL in /usr/X11R6/bin was version 1.5.19-4 >** Last modified sometime in January 2006 >*** (Way before 1.5.20-1 update) Makes you kinda wonder if we really needed a ten message mailing list thread which just reduced to "follow the instructions in the error message". cgf -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ingber@ingber.com Mon Jul 10 13:36:00 2006 From: ingber@ingber.com (Lester Ingber) Date: Mon, 10 Jul 2006 13:36:00 -0000 Subject: unixkill crashes under cygwin-1.5.20-1 (and cygwin1dll-20060707) Message-ID: <20060710133641.GA432@ingber.com> Just how can I can out of x-windoes without a crash dump? If I right click on the X icon and Exit, I get the same beahvior as if I use unixkill? Or, is this bug (that I have only since in cygwin1.dll-1.5.20-1 and cygwin1.dll-20060707) such that this occurs no matter how one exits. The statement below says this is fixed in 6.8.99.901. Under setup.exe, under Curr, my default for the latest X server is 6.8.2.0-4. If I toggle New, one of the options is 6.8.99.901-1? The statement below implies that this is the more recent version? Thanks. Lester +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+= On Jul 8 08:32, Lester Ingber wrote: > Corinna: > > I don't understand why I do not have any such crashes under > cygwin1dll-1.5.19, but only with cygwin1dll-1.5.20-1 and the latest > snapshot cygwin1dll-20060707? May I guess you didn't debug this situation? I did. Trust me. Corinna +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+= Corinna: I don't understand why I do not have any such crashes under cygwin1dll-1.5.19, but only with cygwin1dll-1.5.20-1 and the latest snapshot cygwin1dll-20060707? I attach the output of cygcheck -s -v -r > cygcheck.out which I took with cygwin1dll-1.5.19. Thanks. Lester +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+= Date: Tue, 4 Jul 2006 22:36:30 +0200 On Jul 4 13:21, Lester Ingber wrote: > Has anyone else noticed that unixkill crashes under cygwin-1.5.20-1? > When I press CNTL-ALT-BKSP, I do not get a confirmation prompt, my > X windows do close, but I get an XWin.exe.stackdump -file and after > getting out of Cygwin CNTL-ALT-DEL shows som hanging tcsh processes > (my primary shell). This is a bug in the confirmation dialog routine in the 6.8.2.0 X server. That's fixed in 6.8.99.901. Corinna +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+= * From: Corinna Vinschen * To: cygwin-xfree at cygwin dot com * Date: Sat, 8 Jul 2006 18:08:36 +0200 * Subject: Re: unixkill crashes under cygwin-1.5.20-1 (and cygwin1dll-20060707) * References: <20060708153201.GA1476@ingber.com> * Reply-to: cygwin-xfree at cygwin dot com * Reply-to: cygwin-xfree at cygwin dot com On Jul 8 08:32, Lester Ingber wrote: > Corinna: > > I don't understand why I do not have any such crashes under > cygwin1dll-1.5.19, but only with cygwin1dll-1.5.20-1 and the latest > snapshot cygwin1dll-20060707? May I guess you didn't debug this situation? I did. Trust me. Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Project Co-Leader cygwin AT cygwin DOT com Red Hat -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ingber@ingber.com Mon Jul 10 14:14:00 2006 From: ingber@ingber.com (Lester Ingber) Date: Mon, 10 Jul 2006 14:14:00 -0000 Subject: unixkill crashes under cygwin-1.5.20-1 (and cygwin1dll-20060707) Message-ID: <20060710141418.GA3380@ingber.com> Re: 6.8.99.901-1 I understand that, according to the docs, even under Curr, sometimes an experimental version of a package can be seen when toggling. This seems to be case for 6.8.99.901-1 for the xorg-x11 series. However, under Curr, I cannot toggle all of the xorg-x11 packages. Trying to do so keeps switching a few back to 6.8.2.0-4? If I switch to Exp, then all xorg-x11 packages appear as 6.8.99.901-1, while of course pulling in some other Exp versions of other packages. However, the docs are clear that this is not the recommended default, and when starting setup.exe again, the Curr default will overwrite such packages if they were selected. So, what exactly is recommended? Thanks. Lester +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+= Just how can I can out of x-windoes without a crash dump? If I right click on the X icon and Exit, I get the same beahvior as if I use unixkill? Or, is this bug (that I have only since in cygwin1.dll-1.5.20-1 and cygwin1.dll-20060707) such that this occurs no matter how one exits. The statement below says this is fixed in 6.8.99.901. Also, under setup.exe, under Curr, my default for the latest X server is 6.8.2.0-4. If I toggle New, one of the options is 6.8.99.901-1? The statement below implies that this is the more recent version? Thanks. Lester +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+= On Jul 8 08:32, Lester Ingber wrote: > Corinna: > > I don't understand why I do not have any such crashes under > cygwin1dll-1.5.19, but only with cygwin1dll-1.5.20-1 and the latest > snapshot cygwin1dll-20060707? May I guess you didn't debug this situation? I did. Trust me. Corinna +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+= Corinna: I don't understand why I do not have any such crashes under cygwin1dll-1.5.19, but only with cygwin1dll-1.5.20-1 and the latest snapshot cygwin1dll-20060707? I attach the output of cygcheck -s -v -r > cygcheck.out which I took with cygwin1dll-1.5.19. Thanks. Lester +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+= Date: Tue, 4 Jul 2006 22:36:30 +0200 On Jul 4 13:21, Lester Ingber wrote: > Has anyone else noticed that unixkill crashes under cygwin-1.5.20-1? > When I press CNTL-ALT-BKSP, I do not get a confirmation prompt, my > X windows do close, but I get an XWin.exe.stackdump -file and after > getting out of Cygwin CNTL-ALT-DEL shows som hanging tcsh processes > (my primary shell). This is a bug in the confirmation dialog routine in the 6.8.2.0 X server. That's fixed in 6.8.99.901. Corinna +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+= * From: Corinna Vinschen * To: cygwin-xfree at cygwin dot com * Date: Sat, 8 Jul 2006 18:08:36 +0200 * Subject: Re: unixkill crashes under cygwin-1.5.20-1 (and cygwin1dll-20060707) * References: <20060708153201.GA1476@ingber.com> * Reply-to: cygwin-xfree at cygwin dot com * Reply-to: cygwin-xfree at cygwin dot com On Jul 8 08:32, Lester Ingber wrote: > Corinna: > > I don't understand why I do not have any such crashes under > cygwin1dll-1.5.19, but only with cygwin1dll-1.5.20-1 and the latest > snapshot cygwin1dll-20060707? May I guess you didn't debug this situation? I did. Trust me. Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Project Co-Leader cygwin AT cygwin DOT com Red Hat -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Mon Jul 10 14:58:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Mon, 10 Jul 2006 14:58:00 -0000 Subject: unixkill crashes under cygwin-1.5.20-1 (and cygwin1dll-20060707) In-Reply-To: <20060710141418.GA3380@ingber.com> References: <20060710141418.GA3380@ingber.com> Message-ID: <44B26B1F.1080104@cygwin.com> Lester Ingber wrote: > Re: 6.8.99.901-1 > > I understand that, according to the docs, even under Curr, sometimes an > experimental version of a package can be seen when toggling. This seems > to be case for 6.8.99.901-1 for the xorg-x11 series. > > However, under Curr, I cannot toggle all of the xorg-x11 packages. > Trying to do so keeps switching a few back to 6.8.2.0-4? > > If I switch to Exp, then all xorg-x11 packages appear as 6.8.99.901-1, > while of course pulling in some other Exp versions of other packages. > However, the docs are clear that this is not the recommended default, > and when starting setup.exe again, the Curr default will overwrite such > packages if they were selected. > > So, what exactly is recommended? If the crash on exit is a problem for you, install the experimental version and see how it works for you. If you do so, you will need to remember to toggle the experimental packages you updated to "Keep" on all subsequent invocations of setup.exe until these packages, or later ones containing the same fix, get promoted to current. If the crash isn't a problem for you, just stick with the current version until a new version become current. -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ihok@hotmail.com Mon Jul 10 17:45:00 2006 From: ihok@hotmail.com (Jack Tanner) Date: Mon, 10 Jul 2006 17:45:00 -0000 Subject: unixkill crashes under cygwin-1.5.20-1 (and cygwin1dll-20060707) In-Reply-To: <20060708160836.GB18873@calimero.vinschen.de> References: <20060708153201.GA1476@ingber.com> <20060708160836.GB18873@calimero.vinschen.de> Message-ID: Corinna Vinschen wrote: > On Jul 8 08:32, Lester Ingber wrote: >> Corinna: >> >> I don't understand why I do not have any such crashes under >> cygwin1dll-1.5.19, but only with cygwin1dll-1.5.20-1 and the latest >> snapshot cygwin1dll-20060707? > > May I guess you didn't debug this situation? I did. Trust me. Corinna, was it you that asked about marking the test version of cygwin/x "current"? Now seems like a great time for that. It would probably avoid a zillion identical bug reports to the list. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From cliff@may.be Tue Jul 11 09:04:00 2006 From: cliff@may.be (Cliff Stanford) Date: Tue, 11 Jul 2006 09:04:00 -0000 Subject: Maxivista Pseudo Display Adapter Message-ID: <44B36985.1030609@may.be> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Has anyone had any experience using Cygwin X with the Maxivista product? The URL for the product is http://www.maxivista.com/ and it works by adding in a display driver which extends the PC to have a further monitor, provided by a second PC. In other words, another PC's screen becomes a second (or in my case, a third) monitor. Windows then extends the desktop to the new monitor. My usual setup is two monitors off a single graphics card. Startxwin.bat uses the following line to kick X off: %RUN% XWin -multiwindow -clipboard -silent-dup-error -multiplemonitors This works fine with the two normal monitors. However, if the third, Maxivista monitor is activated, an xterm on either of the original monitors freezes. Input is accepted but I see no output in the xterm window until I either move it to the third monitor or disable that monitor. Any suggestions or pointers would be gratefully received. Thanks, Cliff. - -- Cliff Stanford Might Limited +44 845 0045 666 (Office) Suite 67, Dorset House +44 7973 616 666 (Mobile) Duke Street, Chelmsford, CM1 1TB -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEs2mFfNTx9pWyKfwRAmsHAJwJ4G1mZCXMw9x/nwCGPtF0okyUGwCg32cj ND7cOt5ZokoJoE00XW1oCy8= =yt6E -----END PGP SIGNATURE----- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From naveenb.manjunath@gmail.com Tue Jul 11 12:51:00 2006 From: naveenb.manjunath@gmail.com (Naveen BM) Date: Tue, 11 Jul 2006 12:51:00 -0000 Subject: Xwindow does not start Message-ID: <80c629860607110551g6703ca78o36af8013ccc69602@mail.gmail.com> Hi, I am seeing some issues, with XWin in cygwin, it does not start: ----------------------------------------------------------------------------------------------------------- Machine1@Machine1 ~ $ startxwin.sh Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 6.8.2.0-4 Contact: cygwin-xfree@cygwin.com XWin was started with the following command line: XWin -multiwindow -clipboard -silent-dup-error Fatal server error: Cannot open log file "/tmp/XWin.log" Machine1@Machine1 ~ $ 5 [main] XWin 7768 _cygtls::handle_exceptions: Error while dumping state (probably corrupted stack) Machine1@Machine1 ~ $ startxwin.bat startxwin.bat - Starting on Windows NT/2000/XP/2003 Machine1@Machine1 ~ $ Machine1@Machine1 ~ $ xterm Xt error: Can't open display: 127.0.0.1:0.0 Machine1@Machine1 ~ $ Machine1@Machine1 ~ $ vi /tmp/XWin.log ------------------------------------------------------ The XWin.log is attached. Please let me know, what could be the reason. -- Naveen -------------- next part -------------- A non-text attachment was scrubbed... Name: XWin.log Type: application/octet-stream Size: 2847 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ir0nh34d@gmail.com Tue Jul 11 13:01:00 2006 From: ir0nh34d@gmail.com (Chris Sutcliffe) Date: Tue, 11 Jul 2006 13:01:00 -0000 Subject: Xwindow does not start In-Reply-To: <80c629860607110551g6703ca78o36af8013ccc69602@mail.gmail.com> References: <80c629860607110551g6703ca78o36af8013ccc69602@mail.gmail.com> Message-ID: <2bf229d30607110601h13b18c4cha9bdda8ac7ee010e@mail.gmail.com> > I am seeing some issues, with XWin in cygwin, it does not start: > Fatal server error: > Cannot open log file "/tmp/XWin.log" At a guess the permissions on /tmp/XWin.log do not allow you to write to it. Change the permissions and you should be fine. Chris -- Chris Sutcliffe http://ir0nh34d.blogspot.com http://emergedesktop.org -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From linhaiyxs@yahoo.com Tue Jul 11 22:00:00 2006 From: linhaiyxs@yahoo.com (yu xuesheng) Date: Tue, 11 Jul 2006 22:00:00 -0000 Subject: x windows can't start up Message-ID: <20060711220012.44337.qmail@web55306.mail.re4.yahoo.com> Dear Sir/Madam: I am a new in cygwin. I installed the xwindows but it can't start up. I got a fatal error. I attached the xwin.log with this e_mail. The problem is Fatal server error: could not open default font 'fixed' I tried the troubleshooting here: http://x.cygwin.com/docs/faq/cygwin-x-faq.html#q-error-font-eof The problem is I typed "mount" in cygwin shell: "running mount from a Cygwin shell and checking the disk path returned for the /usr/X11R6/lib/X11/fonts mount point" result is: nothing about /usr/X11R6/lib/X11/fonts go out type "umount /usr/X11R6/lib/X11/fonts" output is "no this file or dictionary" go to reinstall the fonts, after finished still can't start. Please help me! Thank you! Xuesheng __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -------------- next part -------------- A non-text attachment was scrubbed... Name: XWin.log Type: application/octet-stream Size: 1312 bytes Desc: 1438297301-XWin.log URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Adrenaline3@gmail.com Tue Jul 11 22:20:00 2006 From: Adrenaline3@gmail.com (BL4CKFIRE64) Date: Tue, 11 Jul 2006 22:20:00 -0000 Subject: Cygwin/X disconnecting Message-ID: <5278901.post@talk.nabble.com> Is there any way to disconnect from xserver running on debian without X closing? I would like to be able to shutdown my remote computer completely while leaving my username logged on and programs running. I don't have any physical access to the computer either, so I can't login and leave from the console. -- View this message in context: http://www.nabble.com/Cygwin-X-disconnecting-tf1927550.html#a5278901 Sent from the cygwin-xfree forum at Nabble.com. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From linhaiyxs@yahoo.com Wed Jul 12 04:23:00 2006 From: linhaiyxs@yahoo.com (truelies) Date: Wed, 12 Jul 2006 04:23:00 -0000 Subject: x windows can't start up In-Reply-To: <20060711220012.44337.qmail@web55306.mail.re4.yahoo.com> References: <20060711220012.44337.qmail@web55306.mail.re4.yahoo.com> Message-ID: <5282520.post@talk.nabble.com> Here is the xwin.log _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. (II) XF86Config is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winAdjustVideoModeShadowGDI - Using Windows display depth of 32 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1400 height: 1050 depth: 32 winInitVisualsShadowGDI - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 bpp 32 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Hello winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000409" (00000409) (--) Using preset keyboard for "English (USA)" (409), type "4" (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! Fatal server error: could not open default font 'fixed' -- View this message in context: http://www.nabble.com/x-windows-can%27t-start-up-tf1927514.html#a5282520 Sent from the cygwin-xfree forum at Nabble.com. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From skilover@bluebottle.com Wed Jul 12 21:10:00 2006 From: skilover@bluebottle.com (Chuck) Date: Wed, 12 Jul 2006 21:10:00 -0000 Subject: Xwin.log error Message-ID: X11 has been working fine on my PC for 2 years. This week I started getting an error message box whenever I try to run startxwin.bat a 2nd time in order to launch a 2nd xterm. The xterm comes up but only after the error message box appears. XWin.log contains this... Fatal server error: Cannot establish any listening sockets - Make sure an X server isn't already running winDeinitMultiWindowWM - Noting shutdown in progress Of course there's another X server running. I'm trying to open a 2nd xterm. Never had a problem doing this until this week though. It's almost like XWin.exe can't determine that another instance of itself is already running. Coincidentally I also installed util-linux this week. Could that have caused this? I know there's an mcookie program that's part of that package. TIA -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pjfarley3@yahoo.com Wed Jul 12 22:03:00 2006 From: pjfarley3@yahoo.com (Peter Farley) Date: Wed, 12 Jul 2006 22:03:00 -0000 Subject: Xwin.log error In-Reply-To: Message-ID: <20060712220322.77582.qmail@web30210.mail.mud.yahoo.com> PMFJI here, but why in the world are you using startxwin.bat a 2nd time to start a 2nd xterm? In all my cygwin-X experience, starting a second xterm is just a matter of using the xterm icon distributed with the other X-server pieces from setup.exe. I think it is an optional install item, so you may have missed it if you only specified the defaults to install. The item is labeled "X-start-menu-icons". Once it is installed, go to Start/All Programs/Cygwin-X, there is an xterm icon there you can use to start another xterm. Or you can extract the xterm startup line from startxwin.bat and store it as startxterm.bat. HTH Peter --- Chuck wrote: > X11 has been working fine on my PC for 2 years. This > week I started > getting an error message box whenever I try to run > startxwin.bat a 2nd > time in order to launch a 2nd xterm. The xterm comes > up but only after > the error message box appears. > > XWin.log contains this... > > Fatal server error: > Cannot establish any listening sockets - Make sure > an X server isn't > already running > winDeinitMultiWindowWM - Noting shutdown in progress > > > Of course there's another X server running. I'm > trying to open a 2nd > xterm. Never had a problem doing this until this > week though. It's > almost like XWin.exe can't determine that another > instance of itself is > already running. > > Coincidentally I also installed util-linux this > week. Could that have > caused this? I know there's an mcookie program > that's part of that package. > > TIA > > > -- > Unsubscribe info: > http://cygwin.com/ml/#unsubscribe-simple > Problem reports: > http://cygwin.com/problems.html > Documentation: http://x.cygwin.com/docs/ > FAQ: http://x.cygwin.com/docs/faq/ > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Jeff.Blosser@wellsfargo.com Wed Jul 12 22:23:00 2006 From: Jeff.Blosser@wellsfargo.com (Jeff.Blosser@wellsfargo.com) Date: Wed, 12 Jul 2006 22:23:00 -0000 Subject: cygwin windows are white in 2nd monitor Message-ID: I upgraded to XP SP2, yes I was behind. After patching, all windows that are controlled by cygwin, local xterm, remote display's sent to this computer, are all white. The windows work fine in the primary screen (screen 1). I start cygwin with c:\cygwin\usr\X11R6\bin\startxwin.bat. I have not modified this script from the default install so XWin starts with "XWin -multiwindow -clipboard -silent-dup-error". After patching XP, I thought that I might need to reinstall cygwin, so I reinstalled all components of cygwin I was using with setup.exe. I am not sure what version of Cygwin, but hopefully it is up to date since I used setup.exe to install. When I run uname -a I get CYGWIN_NT-5.1 1.5.20_0.156/4/2. Thanks. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pechtcha@cs.nyu.edu Wed Jul 12 23:52:00 2006 From: pechtcha@cs.nyu.edu (Igor Peshansky) Date: Wed, 12 Jul 2006 23:52:00 -0000 Subject: cygwin windows are white in 2nd monitor In-Reply-To: References: Message-ID: On Wed, 12 Jul 2006, Jeff.Blosser wrote: > I upgraded to XP SP2, yes I was behind. After patching, all windows that > are controlled by cygwin, local xterm, remote display's sent to this > computer, are all white. The windows work fine in the primary screen > (screen 1). I start cygwin with c:\cygwin\usr\X11R6\bin\startxwin.bat. I > have not modified this script from the default install so XWin starts > with "XWin -multiwindow -clipboard -silent-dup-error". > > After patching XP, I thought that I might need to reinstall cygwin, so I > reinstalled all components of cygwin I was using with setup.exe. I am > not sure what version of Cygwin, but hopefully it is up to date since I > used setup.exe to install. When I run uname -a I get CYGWIN_NT-5.1 > 1.5.20_0.156/4/2. Thanks. Try giving the -multiplemonitors option to XWin. Igor P.S. You shouldn't need to reinstall Cygwin after patching XP. -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Jeff.Blosser@wellsfargo.com Thu Jul 13 08:24:00 2006 From: Jeff.Blosser@wellsfargo.com (Jeff.Blosser@wellsfargo.com) Date: Thu, 13 Jul 2006 08:24:00 -0000 Subject: cygwin windows are white in 2nd monitor Message-ID: From: Igor Peshansky To: cygwin-xfree at cygwin dot com Date: Wed, 12 Jul 2006 19:52:19 -0400 (EDT) Subject: Re: cygwin windows are white in 2nd monitor References: Reply-to: cygwin-xfree at cygwin dot com Reply-to: cygwin-xfree at cygwin dot com ------------------------------------------------------------------------ -------- On Wed, 12 Jul 2006, Jeff.Blosser wrote: > I upgraded to XP SP2, yes I was behind. After patching, all windows that > are controlled by cygwin, local xterm, remote display's sent to this > computer, are all white. The windows work fine in the primary screen > (screen 1). I start cygwin with c:\cygwin\usr\X11R6\bin\startxwin.bat. I > have not modified this script from the default install so XWin starts > with "XWin -multiwindow -clipboard -silent-dup-error". > > After patching XP, I thought that I might need to reinstall cygwin, so I > reinstalled all components of cygwin I was using with setup.exe. I am > not sure what version of Cygwin, but hopefully it is up to date since I > used setup.exe to install. When I run uname -a I get CYGWIN_NT-5.1 > 1.5.20_0.156/4/2. Thanks. Try giving the -multiplemonitors option to XWin. Igor P.S. You shouldn't need to reinstall Cygwin after patching XP. --- I tried with -multiplemonitors and still have the same results. Here is the Xwin start command: --- %RUN% XWin -multiplemonitors -multiwindow -clipboard -silent-dup-error --- I have also attached Xwin.log. The other thing I have noticed is that /tmp is mounted from --- A diferent place. Before upgrading XP /tmp was just a directory under c:\cygwin now it mounts the dirctory below. I --- have no idea if this is related. Thanks. --- --- --- Filesystem 1K-blocks Used Available Use% Mounted on --- C:\DOCUME~1\Jeff\LOCALS~1\Temp --- 35509288 29961668 5547620 85% /tmp -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ -------------- next part -------------- A non-text attachment was scrubbed... Name: XWin.log Type: application/octet-stream Size: 2530 bytes Desc: XWin.log URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Jeff.Blosser@wellsfargo.com Thu Jul 13 08:41:00 2006 From: Jeff.Blosser@wellsfargo.com (Jeff.Blosser@wellsfargo.com) Date: Thu, 13 Jul 2006 08:41:00 -0000 Subject: cygwin windows are white in 2nd monitor Message-ID: > I upgraded to XP SP2, yes I was behind. After patching, all windows > that are controlled by cygwin, local xterm, remote display's sent to > this computer, are all white. The windows work fine in the primary > screen (screen 1). I start cygwin with > c:\cygwin\usr\X11R6\bin\startxwin.bat. I have not modified this script > from the default install so XWin starts with "XWin -multiwindow -clipboard -silent-dup-error". > > After patching XP, I thought that I might need to reinstall cygwin, so > I reinstalled all components of cygwin I was using with setup.exe. I > am not sure what version of Cygwin, but hopefully it is up to date > since I used setup.exe to install. When I run uname -a I get > CYGWIN_NT-5.1 1.5.20_0.156/4/2. Thanks. Try giving the -multiplemonitors option to XWin. Igor P.S. You shouldn't need to reinstall Cygwin after patching XP. --- I tried with -multiplemonitors and still have the same results. Here is the Xwin start command: --- %RUN% XWin -multiplemonitors -multiwindow -clipboard -silent-dup-error --- I have also attached Xwin.log. The other thing I have noticed is that /tmp is mounted from --- A diferent place. Before upgrading XP /tmp was just a directory under c:\cygwin now it mounts the dirctory below. I --- have no idea if this is related. Thanks. --- --- --- Filesystem 1K-blocks Used Available Use% Mounted on --- C:\DOCUME~1\Jeff\LOCALS~1\Temp --- 35509288 29961668 5547620 85% /tmp -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ -------------- next part -------------- A non-text attachment was scrubbed... Name: XWin.log Type: application/octet-stream Size: 2530 bytes Desc: XWin.log URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From siegfried@heintze.com Thu Jul 13 12:23:00 2006 From: siegfried@heintze.com (siegfried) Date: Thu, 13 Jul 2006 12:23:00 -0000 Subject: How to start Unison for GUI? In-Reply-To: <44A33290.9080504@cygwin.com> Message-ID: The man page for Unison says there is a GUI. I cannot find such a GUI in my list of GUI programs in my menu for Cygwin-X. Is there something wrong with my installation? How do I start it? Thanks, Siegfried -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From skilover@bluebottle.com Thu Jul 13 13:24:00 2006 From: skilover@bluebottle.com (Chuck) Date: Thu, 13 Jul 2006 13:24:00 -0000 Subject: Xwin.log error In-Reply-To: <20060712220322.77582.qmail@web30210.mail.mud.yahoo.com> References: <20060712220322.77582.qmail@web30210.mail.mud.yahoo.com> Message-ID: Peter Farley wrote: > PMFJI here, but why in the world are you using > startxwin.bat a 2nd time to start a 2nd xterm? That was the only icon/xterm-starter installed > In all > my cygwin-X experience, starting a second xterm is > just a matter of using the xterm icon distributed with > the other X-server pieces from setup.exe. > > I think it is an optional install item, so you may > have missed it if you only specified the defaults to > install. The item is labeled "X-start-menu-icons". > Once it is installed, go to Start/All > Programs/Cygwin-X, there is an xterm icon there you > can use to start another xterm. > > Or you can extract the xterm startup line from > startxwin.bat and store it as startxterm.bat. > > HTH > > Peter I'll give that a try but I am still wondering what changed. XWin.exe used to be able to determine that another instance was running and just quietly exit. Thanks. Chuck -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pechtcha@cs.nyu.edu Thu Jul 13 14:22:00 2006 From: pechtcha@cs.nyu.edu (Igor Peshansky) Date: Thu, 13 Jul 2006 14:22:00 -0000 Subject: cygwin windows are white in 2nd monitor In-Reply-To: References: Message-ID: On Thu, 13 Jul 2006, Jeff.Blosser wrote: > > From: Igor Peshansky > > To: cygwin-xfree at cygwin dot com > > Date: Wed, 12 Jul 2006 19:52:19 -0400 (EDT) > > Subject: Re: cygwin windows are white in 2nd monitor > > References: > > > > Reply-to: cygwin-xfree at cygwin dot com > > Reply-to: cygwin-xfree at cygwin dot com > > > > ------------------------------------------------------------------------ > > > > On Wed, 12 Jul 2006, Jeff.Blosser wrote: > > > > > I upgraded to XP SP2, yes I was behind. After patching, all windows > > > that are controlled by cygwin, local xterm, remote display's sent to > > > this computer, are all white. The windows work fine in the primary > > > screen (screen 1). I start cygwin with > > > c:\cygwin\usr\X11R6\bin\startxwin.bat. I have not modified this > > > script from the default install so XWin starts with "XWin > > > -multiwindow -clipboard -silent-dup-error". > > > > > > After patching XP, I thought that I might need to reinstall cygwin, > > > so I reinstalled all components of cygwin I was using with > > > setup.exe. I am not sure what version of Cygwin, but hopefully it is > > > up to date since I used setup.exe to install. When I run uname -a I > > > get CYGWIN_NT-5.1 1.5.20_0.156/4/2. Thanks. > > > > Try giving the -multiplemonitors option to XWin. > > Igor > > P.S. You shouldn't need to reinstall Cygwin after patching XP. > > I tried with -multiplemonitors and still have the same results. Here > is the Xwin start command: > %RUN% XWin -multiplemonitors -multiwindow -clipboard -silent-dup-error > I have also attached Xwin.log. And it clearly shows your problem: > winScreenInit - Monitors do not all have same pixel format / display depth. > Using primary display only. Fix the above, and it should work. > The other thing I have noticed is that /tmp is mounted from A diferent > place. Before upgrading XP /tmp was just a directory under c:\cygwin now > it mounts the dirctory below. I have no idea if this is related. Thanks. > > Filesystem 1K-blocks Used Available Use% Mounted on > C:\DOCUME~1\Jeff\LOCALS~1\Temp > 35509288 29961668 5547620 85% /tmp That's normal. Most Cygwin directories can be mounted from anywhere without much problem (the exceptions are system directories like /usr/bin, /usr/lib, /etc, and so on). Igor -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Jeff.Blosser@wellsfargo.com Thu Jul 13 14:48:00 2006 From: Jeff.Blosser@wellsfargo.com (Jeff.Blosser@wellsfargo.com) Date: Thu, 13 Jul 2006 14:48:00 -0000 Subject: cygwin windows are white in 2nd monitor Message-ID: On Thu, 13 Jul 2006, Jeff.Blosser wrote: > > From: Igor Peshansky > > To: cygwin-xfree at cygwin dot com > > Date: Wed, 12 Jul 2006 19:52:19 -0400 (EDT) > > Subject: Re: cygwin windows are white in 2nd monitor > > References: > > > om> > > Reply-to: cygwin-xfree at cygwin dot com > > Reply-to: cygwin-xfree at cygwin dot com > > > > -------------------------------------------------------------------- > > ---- > > > > On Wed, 12 Jul 2006, Jeff.Blosser wrote: > > > > > I upgraded to XP SP2, yes I was behind. After patching, all > > > windows that are controlled by cygwin, local xterm, remote > > > display's sent to this computer, are all white. The windows work > > > fine in the primary screen (screen 1). I start cygwin with > > > c:\cygwin\usr\X11R6\bin\startxwin.bat. I have not modified this > > > script from the default install so XWin starts with "XWin > > > -multiwindow -clipboard -silent-dup-error". > > > > > > After patching XP, I thought that I might need to reinstall > > > cygwin, so I reinstalled all components of cygwin I was using with > > > setup.exe. I am not sure what version of Cygwin, but hopefully it > > > is up to date since I used setup.exe to install. When I run uname > > > -a I get CYGWIN_NT-5.1 1.5.20_0.156/4/2. Thanks. > > > > Try giving the -multiplemonitors option to XWin. > > Igor > > P.S. You shouldn't need to reinstall Cygwin after patching XP. > > I tried with -multiplemonitors and still have the same results. Here > is the Xwin start command: > %RUN% XWin -multiplemonitors -multiwindow -clipboard -silent-dup-error > I have also attached Xwin.log. And it clearly shows your problem: > winScreenInit - Monitors do not all have same pixel format / display depth. > Using primary display only. Fix the above, and it should work. ----I changed both monitors to be 1024x768 on Display Settings. The 1st monitor has always been 1024x768 and I changed the 2nd monitor from 1280x1024 to 1024x768. This did not help. Before I patched to SP2 they were at 1024x768 and 1280x768. Both monitors are "Highest (32 bit" for Color quality and they are both "ATI Mobility Radeon 7500", IBM T41 laptop. I still see the error message in above in Xwin.log. I don't see any other settings on Display Properties. So SP2 must of changed something..... > The other thing I have noticed is that /tmp is mounted from A diferent > place. Before upgrading XP /tmp was just a directory under c:\cygwin > now it mounts the dirctory below. I have no idea if this is related. Thanks. > > Filesystem 1K-blocks Used Available Use% Mounted on > C:\DOCUME~1\Jeff\LOCALS~1\Temp > 35509288 29961668 5547620 85% /tmp That's normal. Most Cygwin directories can be mounted from anywhere without much problem (the exceptions are system directories like /usr/bin, /usr/lib, /etc, and so on). ---- I don't want this mounted. Do you know where I can comment this out? I don't see it in startxwin.bat. Igor -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pechtcha@cs.nyu.edu Thu Jul 13 16:04:00 2006 From: pechtcha@cs.nyu.edu (Igor Peshansky) Date: Thu, 13 Jul 2006 16:04:00 -0000 Subject: cygwin windows are white in 2nd monitor In-Reply-To: References: Message-ID: On Thu, 13 Jul 2006, Jeff.Blosser wrote: > > On Thu, 13 Jul 2006, Jeff.Blosser wrote: > > > > > From: Igor Peshansky > > > To: cygwin-xfree at cygwin dot com > > > Date: Wed, 12 Jul 2006 19:52:19 -0400 (EDT) > > > Subject: Re: cygwin windows are white in 2nd monitor > > > References: > > > Reply-to: cygwin-xfree at cygwin dot com > > > Reply-to: cygwin-xfree at cygwin dot com > > > > > > > -------------------------------------------------------------------- > > > > > > > > On Wed, 12 Jul 2006, Jeff.Blosser wrote: > > > > > > > > > I upgraded to XP SP2, yes I was behind. After patching, all > > > > > windows that are controlled by cygwin, local xterm, remote > > > > > display's sent to this computer, are all white. The windows work > > > > > fine in the primary screen (screen 1). I start cygwin with > > > > > c:\cygwin\usr\X11R6\bin\startxwin.bat. I have not modified this > > > > > script from the default install so XWin starts with "XWin > > > > > -multiwindow -clipboard -silent-dup-error". > > > > > > > > > > After patching XP, I thought that I might need to reinstall > > > > > cygwin, so I reinstalled all components of cygwin I was using with > > > > > > > setup.exe. I am not sure what version of Cygwin, but hopefully it > > > > > is up to date since I used setup.exe to install. When I run uname > > > > > -a I get CYGWIN_NT-5.1 1.5.20_0.156/4/2. Thanks. > > > > > > > > Try giving the -multiplemonitors option to XWin. > > > > Igor > > > > P.S. You shouldn't need to reinstall Cygwin after patching XP. > > > > > > I tried with -multiplemonitors and still have the same results. Here > > > is the Xwin start command: > > > %RUN% XWin -multiplemonitors -multiwindow -clipboard -silent-dup-error > > > > > I have also attached Xwin.log. > > > > And it clearly shows your problem: > > > > > winScreenInit - Monitors do not all have same pixel format / display depth. > > > Using primary display only. > > > > Fix the above, and it should work. > > I changed both monitors to be 1024x768 on Display Settings. The 1st > monitor has always been 1024x768 and I changed the 2nd monitor from > 1280x1024 to 1024x768. This did not help. Before I patched to SP2 they > were at 1024x768 and 1280x768. Both monitors are "Highest (32 bit" for > Color quality and they are both "ATI Mobility Radeon 7500", IBM T41 > laptop. I still see the error message in above in Xwin.log. I don't see > any other settings on Display Properties. So SP2 must of changed > something..... Sorry, can't reproduce this on my T40 with an external monitor, both with the same display size and different sizes (same color depth). I'm on SP1, though... > > > The other thing I have noticed is that /tmp is mounted from A diferent > > > place. Before upgrading XP /tmp was just a directory under c:\cygwin > > > now it mounts the dirctory below. I have no idea if this is related. > > > Thanks. > > > > > > Filesystem 1K-blocks Used Available Use% Mounted on > > > C:\DOCUME~1\Jeff\LOCALS~1\Temp > > > 35509288 29961668 5547620 85% /tmp > > > > That's normal. Most Cygwin directories can be mounted from anywhere > > without much problem (the exceptions are system directories like > > /usr/bin, /usr/lib, /etc, and so on). > > I don't want this mounted. Do you know where I can comment this > out? I don't see it in startxwin.bat. "man umount". However, you probably want to find out what exactly added the mount in the first place. It's possible that your main mounts are text mode (which wouild have been apparent from the output of "cygcheck -svr" that the Cygwin Problem Reporting Guidelines at ask you to attach). Something must've done 'mount -ub "$TEMP" /tmp' to avoid problems that XWin is sure to have when /tmp is not mounted in binary mode. HTH, Igor -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Jeff.Blosser@wellsfargo.com Thu Jul 13 16:45:00 2006 From: Jeff.Blosser@wellsfargo.com (Jeff.Blosser@wellsfargo.com) Date: Thu, 13 Jul 2006 16:45:00 -0000 Subject: cygwin windows are white in 2nd monitor Message-ID: Here is the fix: http://www.mail-archive.com/cygwin-xfree@cygwin.com/msg15817.html In summary: The problem was I had NetMeeting Desktop sharing running on the machine. Stop netmeeting desktop sharing, problem went away. :-) ...Lyall -----Original Message----- From: Blosser, Jeff Sent: Thursday, July 13, 2006 9:48 AM To: 'cygwin-xfree@cygwin.com' Subject: RE: cygwin windows are white in 2nd monitor On Thu, 13 Jul 2006, Jeff.Blosser wrote: > > From: Igor Peshansky > > To: cygwin-xfree at cygwin dot com > > Date: Wed, 12 Jul 2006 19:52:19 -0400 (EDT) > > Subject: Re: cygwin windows are white in 2nd monitor > > References: > > > om> > > Reply-to: cygwin-xfree at cygwin dot com > > Reply-to: cygwin-xfree at cygwin dot com > > > > -------------------------------------------------------------------- > > ---- > > > > On Wed, 12 Jul 2006, Jeff.Blosser wrote: > > > > > I upgraded to XP SP2, yes I was behind. After patching, all > > > windows that are controlled by cygwin, local xterm, remote > > > display's sent to this computer, are all white. The windows work > > > fine in the primary screen (screen 1). I start cygwin with > > > c:\cygwin\usr\X11R6\bin\startxwin.bat. I have not modified this > > > script from the default install so XWin starts with "XWin > > > -multiwindow -clipboard -silent-dup-error". > > > > > > After patching XP, I thought that I might need to reinstall > > > cygwin, so I reinstalled all components of cygwin I was using with > > > setup.exe. I am not sure what version of Cygwin, but hopefully it > > > is up to date since I used setup.exe to install. When I run uname > > > -a I get CYGWIN_NT-5.1 1.5.20_0.156/4/2. Thanks. > > > > Try giving the -multiplemonitors option to XWin. > > Igor > > P.S. You shouldn't need to reinstall Cygwin after patching XP. > > I tried with -multiplemonitors and still have the same results. Here > is the Xwin start command: > %RUN% XWin -multiplemonitors -multiwindow -clipboard -silent-dup-error > I have also attached Xwin.log. And it clearly shows your problem: > winScreenInit - Monitors do not all have same pixel format / display depth. > Using primary display only. Fix the above, and it should work. ----I changed both monitors to be 1024x768 on Display Settings. The 1st monitor has always been 1024x768 and I changed the 2nd monitor from 1280x1024 to 1024x768. This did not help. Before I patched to SP2 they were at 1024x768 and 1280x768. Both monitors are "Highest (32 bit" for Color quality and they are both "ATI Mobility Radeon 7500", IBM T41 laptop. I still see the error message in above in Xwin.log. I don't see any other settings on Display Properties. So SP2 must of changed something..... > The other thing I have noticed is that /tmp is mounted from A diferent > place. Before upgrading XP /tmp was just a directory under c:\cygwin > now it mounts the dirctory below. I have no idea if this is related. Thanks. > > Filesystem 1K-blocks Used Available Use% Mounted on > C:\DOCUME~1\Jeff\LOCALS~1\Temp > 35509288 29961668 5547620 85% /tmp That's normal. Most Cygwin directories can be mounted from anywhere without much problem (the exceptions are system directories like /usr/bin, /usr/lib, /etc, and so on). ---- I don't want this mounted. Do you know where I can comment this out? I don't see it in startxwin.bat. Igor -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ingber@ingber.com Thu Jul 13 21:41:00 2006 From: ingber@ingber.com (Lester Ingber) Date: Thu, 13 Jul 2006 21:41:00 -0000 Subject: xterm windows keep varporizing Message-ID: <20060713214049.GA6096@ingber.com> Since upgrading to xorg-x11 version 6.8.99.901-1, my xterm windows keep varporizing for reasons I do not understand. There is no cras file and I do not see any entries in my log files. This happens sporadically while I'm working, and a couple times a window quit while coming up., I start my windows with XWin -unixkill -clipboard -multiwindow & and I bring up xterm windows with commands like xterm -j -sb -bg white -fg darkblue -cr green -ms red -bd red -geometry 80x84+77+0 -name left >>& $LOG & I attach the output of cygcheck -s -v -r > cygcheck.out Thanks. Lester -- Prof. Lester Ingber lester@ingber.com ingber@alumni.caltech.edu www.ingber.com alumnus.caltech.edu/~ingber -------------- next part -------------- Cygwin Configuration Diagnostics Current System Time: Thu Jul 13 14:39:55 2006 Windows XP Professional Ver 5.1 Build 2600 Service Pack 2 Path: C:\cygwin\usr\local\bin C:\cygwin\bin C:\cygwin\bin C:\cygwin\usr\local\bin C:\cygwin\bin C:\cygwin\bin C:\cygwin\usr\X11R6\bin c:\WINDOWS\system32 c:\WINDOWS c:\WINDOWS\System32\Wbem c:\windows\system32\ c:\PROGRAM FILES\THINKPAD\UTILITIES c:\Program Files\ATI Technologies\ATI Control Panel c:\Program Files\Belkin\Belkin Wireless Utility\Unicows c:\Program Files\ATI Technologies\Fire GL 3D Studio Max c:\MATLAB7\bin\win32 c:\Program Files\Microsoft Visual Studio\Common\Tools\WinNT c:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin c:\Program Files\Microsoft Visual Studio\Common\Tools c:\Program Files\Microsoft Visual Studio\VC98\bin C:\cygwin\lib\lapack C:\cygwin\home\ingber\.local\bin C:\cygwin\home\ingber\.local\bin\MACS C:\cygwin\usr\local\rdb C:\cygwin\home\ingber\.local\bin\PERLS . C:\cygwin\home\ingber\.local\bin C:\cygwin\home\ingber\.local\bin\MACS C:\cygwin\usr\local\rdb C:\cygwin\home\ingber\.local\bin\PERLS . Output from C:\cygwin\bin\id.exe (nontsec) UID: 1005(ingber) GID: 513(None) 0(root) 513(None) 544(Administrators) 545(Users) Output from C:\cygwin\bin\id.exe (ntsec) UID: 1005(ingber) GID: 513(None) 0(root) 513(None) 544(Administrators) 545(Users) SysDir: C:\WINDOWS\system32 WinDir: C:\WINDOWS HOME = '/home/ingber' PWD = '/home/ingber' USER = 'ingber' MAKE_MODE = 'unix' !:: = '::\' !C: = 'C:\cygwin\bin' ALLUSERSPROFILE = 'C:\Documents and Settings\All Users' APPDATA = 'C:\Documents and Settings\ingber\Application Data' CLASSPATH = '.;' COMMONPROGRAMFILES = 'C:\Program Files\Common Files' COMPUTERNAME = 'LESTER' COMSPEC = 'C:\WINDOWS\system32\cmd.exe' FP_NO_HOST_CHECK = 'NO' HOMEDRIVE = 'C:' HOMEPATH = '\Documents and Settings\ingber' INCLUDE = 'C:\Program Files\Microsoft Visual Studio\VC98\atl\include;C:\Program Files\Microsoft Visual Studio\VC98\mfc\include;C:\Program Files\Microsoft Visual Studio\VC98\include' LIB = 'C:\Program Files\Microsoft Visual Studio\VC98\mfc\lib;C:\Program Files\Microsoft Visual Studio\VC98\lib' LOGONSERVER = '\\LESTER' MSDEVDIR = 'C:\Program Files\Microsoft Visual Studio\Common\MSDev98' NUMBER_OF_PROCESSORS = '1' OS = 'Windows_NT' PATHEXT = '.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH' PROCESSOR_ARCHITECTURE = 'x86' PROCESSOR_IDENTIFIER = 'x86 Family 15 Model 2 Stepping 4, GenuineIntel' PROCESSOR_LEVEL = '15' PROCESSOR_REVISION = '0204' PROGRAMFILES = 'C:\Program Files' PROMPT = '$P$G' SESSIONNAME = 'Console' SYSTEMDRIVE = 'C:' SYSTEMROOT = 'C:\WINDOWS' USERDOMAIN = 'LESTER' USERNAME = 'ingber' USERPROFILE = 'C:\Documents and Settings\ingber' WINDIR = 'C:\WINDOWS' TERM = 'xterm' HOSTTYPE = 'i386' VENDOR = 'intel' OSTYPE = 'posix' MACHTYPE = 'i386' SHLVL = '1' LOGNAME = 'ingber' GROUP = 'None' HOST = 'lester' MANPATH = ':/usr/ssl/man:/usr/share/qt3/doc/man:/usr/X11R6/man:/usr/X11R6/man:/usr/man:/usr/local/man:/home/ingber/.local/man:/usr/local/netpbm/man:/usr/ssl/man:/usr/share/qt3/doc/man:/usr/X11R6/man:/usr/X11R6/man:/usr/man:/usr/local/man:/home/ingber/.local/man:/usr/local/netpbm/man' QTDIR = '/usr/lib/qt3' QMAKESPEC = '/usr/lib/qt3/mkspecs/cygwin-g++' PKG_CONFIG_PATH = '/usr/X11R6/lib/pkgconfig' DISPLAY = 'localhost:0.0' COLORFGBG = 'lightgray;blue' LS_COLORS = 'no=00:fi=00;34:di=01;32:ln=00;35:pi=35;33:so=00;35:bd=35;33;01:cd=35;33;01:or=40;31;01:ex=00;31:*.tar=00;36:*.tgz=01;34:*.arj=01;36:*.taz=01;34:*.lzh=01;34:*.zip=01;34:*.z=01;34:*.Z=01;34:*.gz=01;34:*.deb=00;31:*.jpg=01;36:*.gif=01;36:*.bmp=01;36:*.ppm=01;36:*.tga=01;36:*.xbm=01;36:*.xpm=01;36:*.tif=01;36:*.mpg=01;36:*.html=01;36:*.htm=01;36:*.avi=01;36:*.gl=01;36:*.dl=01;36:' INFOPATH = '.:/usr/info:/usr/share/info:/usr/local/info:/home/ingber/.local/info' MANPATH1 = '/usr/X11R6/man:/usr/man' MANPATH2 = '/usr/local/man:/home/ingber/.local/man' MANPATH3 = '/usr/local/netpbm/man' PGPPATH = '/home/ingber/.pgp' BINDIR = '/usr/local/bin' CVSROOT = '/usr/local/src/CVS_REPOSITORY' EDITOR = 'vim' GNUSTEP_USER_ROOT = '/home/ingber/.GNUstep' ISPELL_DICTIONARY = '/usr/local/lib/ispell/ispell.dict' ISPELL_WORDS = '/usr/local/lib/ispell/ispell.words' JFDIR = '/home/ingber/.procmail/junkfilter' LESS = '-c -n -s -M' LESSOPEN = '|lesspipe %s' LYNX_CFG = '/home/ingber/.lynx.cfg' MAIL = '/home/ingber/.mailbox/inbox' MAPLE = '/usr/local/maple' MBOX = '/home/ingber/.mailbox/inbox' ORGANIZATION = 'Lester Ingber Research' PAGER = 'less -c -n -s -M' TMPDIR = '/tmp' REPLYTO = 'Lester Ingber ' TMAKEPATH = '/usr/local/tmake/lib/cygwin-g++' TZ = 'PST8PDT' MAXIMA_PREFIX = '/cygdrive/c/ProgramFiles/Maxima-5.9.3/' SSH_AUTH_SOCK = '/tmp/ssh-HXyU3Lr2Sz/agent.3860' SSH_AGENT_PID = '5800' WINDOWID = '4194318' XTERM_VERSION = 'Cygwin 6.8.2.0(202)' TERMCAP = 'xterm-r6|xterm|xterm X11R6 version:am:km:mi:ms:xn:co#80:it#8:li#84:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:im=\E[4h:is=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:ue=\E[m:up=\E[A:us=\E[4m:kb=\010:' XTERM_SHELL = '/bin/tcsh' REMOTEHOST = 'lester.ingber.com' TEMP = 'c:/cygwin/tmp' TMP = '/tmp' POSIXLY_CORRECT = '1' HKEY_CURRENT_USER\Software\Cygnus Solutions HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2 HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin (default) = 0x00000400 HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2 (default) = '/cygdrive' cygdrive flags = 0x0000002a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/ (default) = 'C:\cygwin' flags = 0x0000000a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/bin (default) = 'C:\cygwin/bin' flags = 0x0000000a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/lib (default) = 'C:\cygwin/lib' flags = 0x0000000a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/X11R6/lib/X11/fonts (default) = 'C:\cygwin\usr\X11R6\lib\X11\fonts' flags = 0x0000000a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Program Options c: hd NTFS 55902Mb 48% CP CS UN PA FC LESTER_C d: cd N/A N/A e: hd NTFS 76316Mb 59% CP CS UN PA FC LESTER_E C:\cygwin / system binmode C:\cygwin/bin /usr/bin system binmode C:\cygwin/lib /usr/lib system binmode C:\cygwin\usr\X11R6\lib\X11\fonts /usr/X11R6/lib/X11/fonts system binmode . /cygdrive system binmode,cygdrive Found: C:\cygwin\bin\awk.exe Found: C:\cygwin\bin\bash.exe Found: C:\cygwin\bin\cat.exe Found: C:\cygwin\bin\cp.exe Found: C:\cygwin\bin\cpp.exe Found: C:\cygwin\bin\crontab.exe Found: C:\cygwin\bin\find.exe Found: C:\cygwin\bin\gcc.exe Found: C:\cygwin\bin\gdb.exe Found: C:\cygwin\bin\grep.exe Found: C:\cygwin\bin\kill.exe Found: C:\cygwin\bin\ld.exe Found: C:\cygwin\bin\ls.exe Found: C:\cygwin\bin\make.exe Found: C:\cygwin\bin\mv.exe Found: C:\cygwin\bin\patch.exe Found: C:\cygwin\bin\perl.exe Found: C:\cygwin\bin\rm.exe Found: C:\cygwin\bin\sed.exe Found: C:\cygwin\bin\ssh.exe Found: C:\cygwin\bin\sh.exe Found: C:\cygwin\bin\tar.exe Found: C:\cygwin\bin\test.exe Not Found: vi Found: C:\cygwin\bin\vim.exe 80k 2006/02/20 C:\cygwin\bin\cygaa-1.dll - os=4.0 img=1.0 sys=4.0 "cygaa-1.dll" v0.0 ts=2006/2/20 13:16 25k 2005/08/15 C:\cygwin\bin\cygao-2.dll - os=4.0 img=1.0 sys=4.0 "cygao-2.dll" v0.0 ts=2005/8/15 2:22 91k 2005/11/11 C:\cygwin\bin\cygapr-0-0.dll - os=4.0 img=1.0 sys=4.0 "cygapr-0-0.dll" v0.0 ts=2005/11/11 7:03 103k 2006/06/05 C:\cygwin\bin\cygapr-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygapr-1-0.dll" v0.0 ts=2006/6/5 9:25 67k 2005/11/11 C:\cygwin\bin\cygaprutil-0-0.dll - os=4.0 img=1.0 sys=4.0 "cygaprutil-0-0.dll" v0.0 ts=2005/11/11 8:55 70k 2006/06/05 C:\cygwin\bin\cygaprutil-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygaprutil-1-0.dll" v0.0 ts=2006/6/5 15:06 52k 2005/11/10 C:\cygwin\bin\cygart_lgpl-2.dll - os=4.0 img=1.0 sys=4.0 "cygart_lgpl-2.dll" v0.0 ts=2005/11/10 12:33 76k 2005/07/30 C:\cygwin\bin\cygart_lgpl_2-2.dll - os=4.0 img=1.0 sys=4.0 "cygart_lgpl_2-2.dll" v0.0 ts=2005/7/30 3:46 802k 2003/09/15 C:\cygwin\bin\cygaspell-15.dll - os=4.0 img=1.0 sys=4.0 "cygaspell-15.dll" v0.0 ts=2003/9/15 5:32 113k 2005/07/16 C:\cygwin\bin\cygatk-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygatk-1.0-0.dll" v0.0 ts=2005/7/15 12:37 145k 2004/09/02 C:\cygwin\bin\cygaudiofile-0.dll - os=4.0 img=1.0 sys=4.0 "cygaudiofile-0.dll" v0.0 ts=2004/9/1 20:38 326k 2005/09/28 C:\cygwin\bin\cygbonobo-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygbonobo-2-0.dll" v0.0 ts=2005/9/28 13:27 67k 2005/09/28 C:\cygwin\bin\cygbonobo-activation-4.dll - os=4.0 img=1.0 sys=4.0 "cygbonobo-activation-4.dll" v0.0 ts=2005/9/28 12:35 334k 2005/09/27 C:\cygwin\bin\cygbonoboui-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygbonoboui-2-0.dll" v0.0 ts=2005/9/27 14:26 56k 2005/07/09 C:\cygwin\bin\cygbz2-1.dll - os=4.0 img=1.0 sys=4.0 "cygbz2-1.dll" v0.0 ts=2005/7/8 22:09 54k 2002/01/27 C:\cygwin\bin\cygbz21.0.dll - os=4.0 img=1.0 sys=4.0 "cygbz21.0.dll" v0.0 ts=2002/1/26 17:07 317k 2005/10/07 C:\cygwin\bin\cygcairo-2.dll - os=4.0 img=1.0 sys=4.0 "cygcairo-2.dll" v0.0 ts=2005/10/7 14:49 7k 2005/11/20 C:\cygwin\bin\cygcharset-1.dll - os=4.0 img=1.0 sys=4.0 "cygcharset-1.dll" v0.0 ts=2005/11/19 18:24 255k 2006/05/01 C:\cygwin\bin\cygclamav-1.dll - os=4.0 img=1.0 sys=4.0 "cygclamav-1.dll" v0.0 ts=2006/4/30 5:50 16k 2005/10/11 C:\cygwin\bin\cygcompface-0.dll - os=4.0 img=1.0 sys=4.0 "cygcompface-0.dll" v0.0 ts=2005/10/11 6:58 529k 2004/06/27 C:\cygwin\bin\cygcppunit-1-9-14.dll - os=4.0 img=1.0 sys=4.0 "cygcppunit-1-9-14.dll" v0.0 ts=2004/6/26 18:29 260k 2004/10/26 C:\cygwin\bin\cygcroco-0.6-3.dll - os=4.0 img=1.0 sys=4.0 "cygcroco-0.6-3.dll" v0.0 ts=2004/10/26 15:09 7k 2003/10/19 C:\cygwin\bin\cygcrypt-0.dll - os=4.0 img=1.0 sys=4.0 "cygcrypt-0.dll" v0.0 ts=2003/10/19 0:57 1108k 2006/06/01 C:\cygwin\bin\cygcrypto-0.9.7.dll - os=4.0 img=1.0 sys=4.0 "cygcrypto-0.9.7.dll" v0.0 ts=2006/6/1 8:50 1050k 2006/06/01 C:\cygwin\bin\cygcrypto-0.9.8.dll - os=4.0 img=1.0 sys=4.0 "cygcrypto-0.9.8.dll" v0.0 ts=2006/6/1 9:08 645k 2003/04/11 C:\cygwin\bin\cygcrypto.dll - os=4.0 img=1.0 sys=4.0 "cygcrypto.dll" v0.0 ts=2003/4/11 3:37 194k 2006/06/12 C:\cygwin\bin\cygcurl-3.dll - os=4.0 img=1.0 sys=4.0 "cygcurl-3.dll" v0.0 ts=2006/6/12 2:00 22k 2004/02/10 C:\cygwin\bin\cygcygipc-2.dll - os=4.0 img=1.0 sys=4.0 "cygcygipc-2.dll" v0.0 ts=2004/2/9 18:48 380k 2002/07/24 C:\cygwin\bin\cygdb-3.1.dll - os=4.0 img=1.0 sys=4.0 "cygdb-3.1.dll" v0.0 ts=2002/7/24 9:24 831k 2003/09/20 C:\cygwin\bin\cygdb-4.1.dll - os=4.0 img=1.0 sys=4.0 "cygdb-4.1.dll" v0.0 ts=2003/9/20 14:51 895k 2004/04/28 C:\cygwin\bin\cygdb-4.2.dll - os=4.0 img=1.0 sys=4.0 "cygdb-4.2.dll" v0.0 ts=2004/4/27 8:31 965k 2005/05/14 C:\cygwin\bin\cygdb-4.3.dll - os=4.0 img=1.0 sys=4.0 "cygdb-4.3.dll" v0.0 ts=2005/5/14 5:37 326k 2002/06/26 C:\cygwin\bin\cygdb2.dll - os=4.0 img=1.0 sys=4.0 "cygdb2.dll" v0.0 ts=2002/6/26 10:48 487k 2002/07/24 C:\cygwin\bin\cygdb_cxx-3.1.dll - os=4.0 img=1.0 sys=4.0 "cygdb_cxx-3.1.dll" v0.0 ts=2002/7/24 9:25 1080k 2003/09/20 C:\cygwin\bin\cygdb_cxx-4.1.dll - os=4.0 img=1.0 sys=4.0 "cygdb_cxx-4.1.dll" v0.0 ts=2003/9/20 14:53 1156k 2004/04/28 C:\cygwin\bin\cygdb_cxx-4.2.dll - os=4.0 img=1.0 sys=4.0 "cygdb_cxx-4.2.dll" v0.0 ts=2004/4/27 8:35 1240k 2005/05/14 C:\cygwin\bin\cygdb_cxx-4.3.dll - os=4.0 img=1.0 sys=4.0 "cygdb_cxx-4.3.dll" v0.0 ts=2005/5/14 5:41 9k 2004/10/24 C:\cygwin\bin\cygdlloader-6.dll - os=4.0 img=1.0 sys=4.0 "cygdlloader-6.dll" v0.0 ts=2004/10/24 0:59 507k 2005/10/10 C:\cygwin\bin\cygEMF-1.dll - os=4.0 img=1.0 sys=4.0 "cygEMF-1.dll" v0.0 ts=2005/10/9 22:11 27k 2005/08/21 C:\cygwin\bin\cygesd-0.dll - os=4.0 img=1.0 sys=4.0 "cygesd-0.dll" v0.0 ts=2005/8/21 16:04 94k 2004/06/07 C:\cygwin\bin\cygexif-10.dll - os=4.0 img=1.0 sys=4.0 "cygexif-10.dll" v0.0 ts=2004/6/7 1:53 107k 2005/08/08 C:\cygwin\bin\cygexif-12.dll - os=4.0 img=1.0 sys=4.0 "cygexif-12.dll" v0.0 ts=2005/8/8 4:50 174k 2004/10/14 C:\cygwin\bin\cygexpat-0.dll - os=4.0 img=1.0 sys=4.0 "cygexpat-0.dll" v0.0 ts=2004/10/14 1:34 72k 2005/12/10 C:\cygwin\bin\cygexslt-0.dll - os=4.0 img=1.0 sys=4.0 "cygexslt-0.dll" v0.0 ts=2005/12/9 16:45 509k 2006/01/11 C:\cygwin\bin\cygfftw3-3.dll - os=4.0 img=1.0 sys=4.0 "cygfftw3-3.dll" v0.0 ts=2006/1/10 18:24 69k 2006/01/11 C:\cygwin\bin\cygfftw3_threads-3.dll - os=4.0 img=1.0 sys=4.0 "cygfftw3_threads-3.dll" v0.0 ts=2006/1/11 5:27 214k 2005/08/13 C:\cygwin\bin\cygFLAC++-5.dll - os=4.0 img=1.0 sys=4.0 "cygFLAC++-5.dll" v0.0 ts=2005/8/13 1:09 274k 2005/08/13 C:\cygwin\bin\cygFLAC-7.dll - os=4.0 img=1.0 sys=4.0 "cygFLAC-7.dll" v0.0 ts=2005/8/13 1:04 654k 2003/11/04 C:\cygwin\bin\cygfltknox-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox-0.dll" v0.0 ts=2003/11/4 13:57 65k 2003/11/04 C:\cygwin\bin\cygfltknox_forms-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox_forms-0.dll" v0.0 ts=2003/11/4 13:57 81k 2003/11/04 C:\cygwin\bin\cygfltknox_gl-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox_gl-0.dll" v0.0 ts=2003/11/4 13:58 108k 2003/11/04 C:\cygwin\bin\cygfltknox_images-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox_images-0.dll" v0.0 ts=2003/11/4 13:58 129k 2004/03/11 C:\cygwin\bin\cygfontconfig-1.dll - os=4.0 img=1.0 sys=4.0 "cygfontconfig-1.dll" v0.0 ts=2004/3/10 16:12 40k 2006/03/24 C:\cygwin\bin\cygform-8.dll - os=4.0 img=1.0 sys=4.0 "cygform-8.dll" v0.0 ts=2006/3/23 23:16 45k 2001/04/25 C:\cygwin\bin\cygform5.dll - os=4.0 img=1.0 sys=4.0 "cygform5.dll" v0.0 ts=2001/4/24 22:28 35k 2002/01/09 C:\cygwin\bin\cygform6.dll - os=4.0 img=1.0 sys=4.0 "cygform6.dll" v0.0 ts=2002/1/8 22:03 48k 2003/08/09 C:\cygwin\bin\cygform7.dll - os=4.0 img=1.0 sys=4.0 "cygform7.dll" v0.0 ts=2003/8/9 2:25 859k 2005/08/08 C:\cygwin\bin\cygfpx-1.dll - os=4.0 img=1.0 sys=4.0 "cygfpx-1.dll" v0.0 ts=2005/8/8 14:35 375k 2005/09/06 C:\cygwin\bin\cygfreetype-6.dll - os=4.0 img=1.0 sys=4.0 "cygfreetype-6.dll" v0.0 ts=2005/9/6 15:51 23k 2005/11/30 C:\cygwin\bin\cyggailutil-17.dll - os=4.0 img=1.0 sys=4.0 "cyggailutil-17.dll" v0.0 ts=2005/11/30 13:11 178k 2005/09/28 C:\cygwin\bin\cyggconf-2-4.dll - os=4.0 img=1.0 sys=4.0 "cyggconf-2-4.dll" v0.0 ts=2005/9/28 13:21 323k 2005/07/10 C:\cygwin\bin\cyggcrypt-11.dll - os=4.0 img=1.0 sys=4.0 "cyggcrypt-11.dll" v0.0 ts=2005/7/9 17:10 222k 2005/01/13 C:\cygwin\bin\cyggd-2.dll - os=4.0 img=1.0 sys=4.0 "cyggd-2.dll" v0.0 ts=2005/1/13 7:56 28k 2003/07/20 C:\cygwin\bin\cyggdbm-3.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm-3.dll" v0.0 ts=2003/7/20 0:58 30k 2003/08/11 C:\cygwin\bin\cyggdbm-4.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm-4.dll" v0.0 ts=2003/8/10 19:12 19k 2003/03/22 C:\cygwin\bin\cyggdbm.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm.dll" v0.0 ts=2002/2/19 19:05 15k 2003/07/20 C:\cygwin\bin\cyggdbm_compat-3.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm_compat-3.dll" v0.0 ts=2003/7/20 1:00 15k 2003/08/11 C:\cygwin\bin\cyggdbm_compat-4.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm_compat-4.dll" v0.0 ts=2003/8/10 19:13 195k 2004/09/02 C:\cygwin\bin\cyggdk-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk-1-2-0.dll" v0.0 ts=2004/9/2 11:31 451k 2005/12/27 C:\cygwin\bin\cyggdk-x11-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk-x11-2.0-0.dll" v0.0 ts=2005/12/26 3:20 128k 2005/08/02 C:\cygwin\bin\cyggdk_imlib-1.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_imlib-1.dll" v0.0 ts=2005/8/1 17:36 77k 2005/12/27 C:\cygwin\bin\cyggdk_pixbuf-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf-2.0-0.dll" v0.0 ts=2005/12/26 3:11 72k 2005/11/16 C:\cygwin\bin\cyggdk_pixbuf-2.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf-2.dll" v0.0 ts=2005/11/16 13:40 54k 2005/12/27 C:\cygwin\bin\cyggdk_pixbuf_xlib-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf_xlib-2.0-0.dll" v0.0 ts=2005/12/26 4:03 105k 2005/11/16 C:\cygwin\bin\cyggdk_pixbuf_xlib-2.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf_xlib-2.dll" v0.0 ts=2005/11/16 13:41 23k 2006/02/14 C:\cygwin\bin\cygGeoIP-1.dll - os=4.0 img=1.0 sys=4.0 "cygGeoIP-1.dll" v0.0 ts=2006/2/6 13:13 21k 2006/02/14 C:\cygwin\bin\cygGeoIPUpdate-0.dll - os=4.0 img=1.0 sys=4.0 "cygGeoIPUpdate-0.dll" v0.0 ts=2006/2/13 23:27 116k 2004/10/10 C:\cygwin\bin\cyggeotiff-1.dll - os=4.0 img=1.0 sys=4.0 "cyggeotiff-1.dll" v0.0 ts=2004/10/10 16:55 78k 2005/11/20 C:\cygwin\bin\cyggettextlib-0-14-5.dll - os=4.0 img=1.0 sys=4.0 "cyggettextlib-0-14-5.dll" v0.0 ts=2005/11/19 18:11 13k 2005/11/20 C:\cygwin\bin\cyggettextpo-0.dll - os=4.0 img=1.0 sys=4.0 "cyggettextpo-0.dll" v0.0 ts=2005/11/19 18:11 163k 2005/11/20 C:\cygwin\bin\cyggettextsrc-0-14-5.dll - os=4.0 img=1.0 sys=4.0 "cyggettextsrc-0-14-5.dll" v0.0 ts=2005/11/19 18:11 32k 2006/02/28 C:\cygwin\bin\cyggg-1.dll - os=4.0 img=1.0 sys=4.0 "cyggg-1.dll" v0.0 ts=2006/2/28 8:13 46k 2006/03/02 C:\cygwin\bin\cygggi-2.dll - os=4.0 img=1.0 sys=4.0 "cygggi-2.dll" v0.0 ts=2006/3/2 8:53 9k 2006/03/02 C:\cygwin\bin\cygggimisc-2.dll - os=4.0 img=1.0 sys=4.0 "cygggimisc-2.dll" v0.0 ts=2006/3/2 12:05 9k 2006/03/02 C:\cygwin\bin\cygggiwmh-0.dll - os=4.0 img=1.0 sys=4.0 "cygggiwmh-0.dll" v0.0 ts=2006/3/2 11:48 24k 2006/02/28 C:\cygwin\bin\cyggii-1.dll - os=4.0 img=1.0 sys=4.0 "cyggii-1.dll" v0.0 ts=2006/2/28 8:15 81k 2005/08/18 C:\cygwin\bin\cygglade-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygglade-2.0-0.dll" v0.0 ts=2005/8/18 11:51 135k 2005/03/16 C:\cygwin\bin\cygglib-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygglib-1-2-0.dll" v0.0 ts=2005/3/15 18:16 557k 2006/01/04 C:\cygwin\bin\cygglib-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygglib-2.0-0.dll" v0.0 ts=2006/1/4 1:48 135k 2005/12/11 C:\cygwin\bin\cygglitz-1.dll - os=4.0 img=1.0 sys=4.0 "cygglitz-1.dll" v0.0 ts=2005/12/11 12:35 19k 2005/12/11 C:\cygwin\bin\cygglitz-glx-1.dll - os=4.0 img=1.0 sys=4.0 "cygglitz-glx-1.dll" v0.0 ts=2005/12/11 12:39 12k 2005/03/16 C:\cygwin\bin\cyggmodule-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggmodule-1-2-0.dll" v0.0 ts=2005/3/15 18:18 10k 2006/01/04 C:\cygwin\bin\cyggmodule-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggmodule-2.0-0.dll" v0.0 ts=2006/1/4 1:49 158k 2004/10/16 C:\cygwin\bin\cyggmp-3.dll - os=4.0 img=1.0 sys=4.0 "cyggmp-3.dll" v0.0 ts=2004/10/16 0:40 288k 2004/10/16 C:\cygwin\bin\cyggmpxx-3.dll - os=4.0 img=1.0 sys=4.0 "cyggmpxx-3.dll" v0.0 ts=2004/10/16 0:40 68k 2005/12/01 C:\cygwin\bin\cyggnome-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnome-2-0.dll" v0.0 ts=2005/11/30 18:14 87k 2005/11/10 C:\cygwin\bin\cyggnome-32.dll - os=4.0 img=1.0 sys=4.0 "cyggnome-32.dll" v0.0 ts=2005/11/10 13:21 35k 2006/02/14 C:\cygwin\bin\cyggnome-keyring-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnome-keyring-0.dll" v0.0 ts=2006/2/14 15:55 156k 2005/11/30 C:\cygwin\bin\cyggnomecanvas-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomecanvas-2-0.dll" v0.0 ts=2005/11/30 14:55 12k 2005/11/16 C:\cygwin\bin\cyggnomecanvaspixbuf-1.dll - os=4.0 img=1.0 sys=4.0 "cyggnomecanvaspixbuf-1.dll" v0.0 ts=2005/11/16 13:41 338k 2005/08/22 C:\cygwin\bin\cyggnomeprint-2-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeprint-2-2-0.dll" v0.0 ts=2005/8/21 17:20 179k 2005/08/22 C:\cygwin\bin\cyggnomeprintui-2-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeprintui-2-2-0.dll" v0.0 ts=2005/8/22 12:14 18k 2005/11/10 C:\cygwin\bin\cyggnomesupport-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomesupport-0.dll" v0.0 ts=2005/11/10 12:30 509k 2006/02/07 C:\cygwin\bin\cyggnomeui-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeui-2-0.dll" v0.0 ts=2006/2/7 13:57 826k 2005/11/10 C:\cygwin\bin\cyggnomeui-32.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeui-32.dll" v0.0 ts=2005/11/10 13:24 332k 2005/12/06 C:\cygwin\bin\cyggnomevfs-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomevfs-2-0.dll" v0.0 ts=2005/12/5 14:01 42k 2005/11/10 C:\cygwin\bin\cyggnorba-27.dll - os=4.0 img=1.0 sys=4.0 "cyggnorba-27.dll" v0.0 ts=2005/11/10 13:27 22k 2005/11/10 C:\cygwin\bin\cyggnorbagtk-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnorbagtk-0.dll" v0.0 ts=2005/11/10 13:10 382k 2005/08/21 C:\cygwin\bin\cyggnutls-11.dll - os=4.0 img=1.0 sys=4.0 "cyggnutls-11.dll" v0.0 ts=2005/8/21 4:40 71k 2005/08/21 C:\cygwin\bin\cyggnutls-extra-11.dll - os=4.0 img=1.0 sys=4.0 "cyggnutls-extra-11.dll" v0.0 ts=2005/8/21 4:42 21k 2005/08/21 C:\cygwin\bin\cyggnutls-openssl-11.dll - os=4.0 img=1.0 sys=4.0 "cyggnutls-openssl-11.dll" v0.0 ts=2005/8/21 4:42 229k 2006/01/04 C:\cygwin\bin\cyggobject-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggobject-2.0-0.dll" v0.0 ts=2006/1/4 1:49 12k 2005/07/09 C:\cygwin\bin\cyggpg-error-0.dll - os=4.0 img=1.0 sys=4.0 "cyggpg-error-0.dll" v0.0 ts=2005/7/9 15:34 351k 2004/07/17 C:\cygwin\bin\cygGraphicsMagick++-0.dll - os=4.0 img=1.0 sys=4.0 "cygGraphicsMagick++-0.dll" v0.0 ts=2004/7/17 1:48 2170k 2004/07/17 C:\cygwin\bin\cygGraphicsMagick-0.dll - os=4.0 img=1.0 sys=4.0 "cygGraphicsMagick-0.dll" v0.0 ts=2004/7/17 1:46 1444k 2006/05/24 C:\cygwin\bin\cyggsl-0.dll - os=4.0 img=1.0 sys=4.0 "cyggsl-0.dll" v0.0 ts=2006/5/24 13:26 186k 2006/05/24 C:\cygwin\bin\cyggslcblas-0.dll - os=4.0 img=1.0 sys=4.0 "cyggslcblas-0.dll" v0.0 ts=2006/5/24 12:43 10k 2005/03/16 C:\cygwin\bin\cyggthread-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggthread-1-2-0.dll" v0.0 ts=2005/3/15 18:18 14k 2006/01/04 C:\cygwin\bin\cyggthread-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggthread-2.0-0.dll" v0.0 ts=2006/1/4 1:50 1293k 2004/09/02 C:\cygwin\bin\cyggtk-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggtk-1-2-0.dll" v0.0 ts=2004/9/2 11:44 2764k 2005/12/27 C:\cygwin\bin\cyggtk-x11-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggtk-x11-2.0-0.dll" v0.0 ts=2005/12/26 3:43 340k 2006/02/15 C:\cygwin\bin\cyggtkhtml-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggtkhtml-2-0.dll" v0.0 ts=2006/2/14 18:56 338k 2005/11/10 C:\cygwin\bin\cyggtkxmhtml-1.dll - os=4.0 img=1.0 sys=4.0 "cyggtkxmhtml-1.dll" v0.0 ts=2005/11/10 13:04 528k 2005/10/09 C:\cygwin\bin\cygguile-12.dll - os=4.0 img=1.0 sys=4.0 "cygguile-12.dll" v0.0 ts=2005/10/9 6:25 488k 2002/07/18 C:\cygwin\bin\cygguile-14.dll - os=4.0 img=1.0 sys=4.0 "cygguile-14.dll" v0.0 ts=2002/7/18 3:35 640k 2004/10/12 C:\cygwin\bin\cygguile-16.dll - os=4.0 img=1.0 sys=4.0 "cygguile-16.dll" v0.0 ts=2004/10/12 7:42 18k 2005/10/09 C:\cygwin\bin\cygguile-ltdl-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-ltdl-1.dll" v0.0 ts=2005/10/9 6:24 5k 2004/10/12 C:\cygwin\bin\cygguile-ltdl-2.dll - os=4.0 img=1.0 sys=4.0 "cygguile-ltdl-2.dll" v0.0 ts=2004/10/12 4:02 11k 2004/10/12 C:\cygwin\bin\cygguile-srfi-srfi-1-v-2-2.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-1-v-2-2.dll" v0.0 ts=2004/10/12 7:42 63k 2002/07/18 C:\cygwin\bin\cygguile-srfi-srfi-13-14-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-13-14-1.dll" v0.0 ts=2002/7/18 3:35 68k 2005/10/09 C:\cygwin\bin\cygguile-srfi-srfi-13-14-v-1-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-13-14-v-1-1.dll" v0.0 ts=2005/10/9 6:25 4k 2004/10/12 C:\cygwin\bin\cygguile-srfi-srfi-13-14-v-2-2.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-13-14-v-2-2.dll" v0.0 ts=2004/10/12 7:43 24k 2002/07/18 C:\cygwin\bin\cygguile-srfi-srfi-4-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-4-1.dll" v0.0 ts=2002/7/18 3:35 31k 2005/10/09 C:\cygwin\bin\cygguile-srfi-srfi-4-v-1-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-4-v-1-1.dll" v0.0 ts=2005/10/9 6:25 22k 2004/10/12 C:\cygwin\bin\cygguile-srfi-srfi-4-v-2-2.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-4-v-2-2.dll" v0.0 ts=2004/10/12 7:42 14k 2002/07/18 C:\cygwin\bin\cygguilereadline-14.dll - os=4.0 img=1.0 sys=4.0 "cygguilereadline-14.dll" v0.0 ts=2002/7/18 3:35 12k 2005/10/09 C:\cygwin\bin\cygguilereadline-v-12-12.dll - os=4.0 img=1.0 sys=4.0 "cygguilereadline-v-12-12.dll" v0.0 ts=2005/10/9 6:25 11k 2004/10/12 C:\cygwin\bin\cygguilereadline-v-16-16.dll - os=4.0 img=1.0 sys=4.0 "cygguilereadline-v-16-16.dll" v0.0 ts=2004/10/12 7:42 17k 2001/06/28 C:\cygwin\bin\cyghistory4.dll - os=4.0 img=1.0 sys=4.0 "cyghistory4.dll" v0.0 ts=2001/1/6 20:34 29k 2003/08/10 C:\cygwin\bin\cyghistory5.dll - os=4.0 img=1.0 sys=4.0 "cyghistory5.dll" v0.0 ts=2003/8/10 16:16 24k 2006/03/25 C:\cygwin\bin\cyghistory6.dll - os=4.0 img=1.0 sys=4.0 "cyghistory6.dll" v0.0 ts=2006/3/25 6:05 335k 2006/06/06 C:\cygwin\bin\cyghttpd2core.dll - os=4.0 img=1.0 sys=4.0 "cyghttpd2core.dll" v0.0 ts=2006/6/6 5:28 947k 2005/11/20 C:\cygwin\bin\cygiconv-2.dll - os=4.0 img=1.0 sys=4.0 "cygiconv-2.dll" v0.0 ts=2005/11/19 18:24 136k 2005/08/01 C:\cygwin\bin\cygIDL-0-6-0.dll - os=4.0 img=1.0 sys=4.0 "cygIDL-0-6-0.dll" v0.0 ts=2005/8/1 12:50 142k 2005/08/01 C:\cygwin\bin\cygIDL-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygIDL-2-0.dll" v0.0 ts=2005/8/1 14:33 40k 2005/08/01 C:\cygwin\bin\cygIIOP-0.dll - os=4.0 img=1.0 sys=4.0 "cygIIOP-0.dll" v0.0 ts=2005/8/1 13:28 155k 2005/08/02 C:\cygwin\bin\cygImlib-1.dll - os=4.0 img=1.0 sys=4.0 "cygImlib-1.dll" v0.0 ts=2005/8/1 17:37 9k 2005/08/02 C:\cygwin\bin\cygimlib-bmp.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-bmp.dll" v0.0 ts=2005/8/1 17:38 6k 2005/08/02 C:\cygwin\bin\cygimlib-gif.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-gif.dll" v0.0 ts=2005/8/1 17:38 7k 2005/08/02 C:\cygwin\bin\cygimlib-jpeg.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-jpeg.dll" v0.0 ts=2005/8/1 17:38 11k 2005/08/02 C:\cygwin\bin\cygimlib-png.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-png.dll" v0.0 ts=2005/8/1 17:39 8k 2005/08/02 C:\cygwin\bin\cygimlib-ppm.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-ppm.dll" v0.0 ts=2005/8/1 17:38 7k 2005/08/02 C:\cygwin\bin\cygimlib-ps.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-ps.dll" v0.0 ts=2005/8/1 17:38 6k 2005/08/02 C:\cygwin\bin\cygimlib-tiff.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-tiff.dll" v0.0 ts=2005/8/1 17:39 10k 2005/08/02 C:\cygwin\bin\cygimlib-xpm.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-xpm.dll" v0.0 ts=2005/8/1 17:38 22k 2001/12/13 C:\cygwin\bin\cygintl-1.dll - os=4.0 img=1.0 sys=4.0 "cygintl-1.dll" v0.0 ts=2001/12/13 1:28 37k 2003/08/10 C:\cygwin\bin\cygintl-2.dll - os=4.0 img=1.0 sys=4.0 "cygintl-2.dll" v0.0 ts=2003/8/10 14:50 31k 2005/11/20 C:\cygwin\bin\cygintl-3.dll - os=4.0 img=1.0 sys=4.0 "cygintl-3.dll" v0.0 ts=2005/11/19 18:04 21k 2001/06/20 C:\cygwin\bin\cygintl.dll - os=4.0 img=1.0 sys=4.0 "cygintl.dll" v0.0 ts=2001/6/20 10:09 12k 2003/02/17 C:\cygwin\bin\cygioperm-0.dll - os=4.0 img=1.0 sys=4.0 "cygioperm-0.dll" v0.0 ts=2003/2/17 11:58 241k 2004/08/06 C:\cygwin\bin\cygjasper-1-701-1.dll - os=4.0 img=1.0 sys=4.0 "cygjasper-1-701-1.dll" v0.0 ts=2004/8/6 8:17 48k 2003/08/10 C:\cygwin\bin\cygjbig1.dll - os=4.0 img=1.0 sys=4.0 "cygjbig1.dll" v0.0 ts=2003/8/10 16:58 132k 2003/08/11 C:\cygwin\bin\cygjpeg-62.dll - os=4.0 img=1.0 sys=4.0 "cygjpeg-62.dll" v0.0 ts=2003/8/10 17:37 119k 2002/02/09 C:\cygwin\bin\cygjpeg6b.dll - os=4.0 img=1.0 sys=4.0 "cygjpeg6b.dll" v0.0 ts=2002/2/8 21:19 60k 2004/09/27 C:\cygwin\bin\cygkpathsea-3.dll - os=4.0 img=1.0 sys=4.0 "cygkpathsea-3.dll" v0.0 ts=2004/9/27 10:32 60k 2003/07/27 C:\cygwin\bin\cygkpathsea-3abi13.dll - os=4.0 img=1.0 sys=4.0 "cygkpathsea-3abi13.dll" v0.0 ts=2003/7/27 13:23 65k 2005/05/05 C:\cygwin\bin\cygkpathsea-4.dll - os=4.0 img=1.0 sys=4.0 "cygkpathsea-4.dll" v0.0 ts=2005/5/5 7:33 41k 2005/08/29 C:\cygwin\bin\cyglber-2-2-7.dll - os=4.0 img=1.0 sys=4.0 "cyglber-2-2-7.dll" v0.0 ts=2005/8/14 10:48 40k 2004/01/02 C:\cygwin\bin\cyglber-2.dll - os=4.0 img=1.0 sys=4.0 "cyglber-2.dll" v0.0 ts=2004/1/2 3:11 156k 2005/08/08 C:\cygwin\bin\cyglcms-1.dll - os=4.0 img=1.0 sys=4.0 "cyglcms-1.dll" v0.0 ts=2005/8/8 3:15 176k 2005/08/29 C:\cygwin\bin\cygldap-2-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygldap-2-2-7.dll" v0.0 ts=2005/8/29 4:14 194k 2004/01/02 C:\cygwin\bin\cygldap-2.dll - os=4.0 img=1.0 sys=4.0 "cygldap-2.dll" v0.0 ts=2004/1/2 3:27 188k 2005/08/29 C:\cygwin\bin\cygldap_r-2-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygldap_r-2-2-7.dll" v0.0 ts=2005/8/29 4:14 202k 2004/01/02 C:\cygwin\bin\cygldap_r-2.dll - os=4.0 img=1.0 sys=4.0 "cygldap_r-2.dll" v0.0 ts=2004/1/2 3:27 68k 2006/01/21 C:\cygwin\bin\cyglightcomp.dll - os=4.0 img=1.0 sys=4.0 "cyglightcomp.dll" v0.0 ts=2006/1/21 2:42 23k 2006/04/19 C:\cygwin\bin\cygltdl-3.dll - os=4.0 img=1.0 sys=4.0 "cygltdl-3.dll" v0.0 ts=2006/4/18 23:19 26k 2004/10/24 C:\cygwin\bin\cygltdl-6.dll - os=4.0 img=1.0 sys=4.0 "cygltdl-6.dll" v0.0 ts=2004/10/24 0:59 48k 2005/11/19 C:\cygwin\bin\cygmagic-1.dll - os=4.0 img=1.0 sys=4.0 "cygmagic-1.dll" v0.0 ts=2005/11/19 3:22 369k 2004/08/11 C:\cygwin\bin\cygMagick++-6.dll - os=4.0 img=1.0 sys=4.0 "cygMagick++-6.dll" v0.0 ts=2004/8/10 23:04 3214k 2004/08/11 C:\cygwin\bin\cygMagick-6.dll - os=4.0 img=1.0 sys=4.0 "cygMagick-6.dll" v0.0 ts=2004/8/10 22:37 181k 2003/10/06 C:\cygwin\bin\cygmcrypt-4.dll - os=4.0 img=1.0 sys=4.0 "cygmcrypt-4.dll" v0.0 ts=2003/10/6 7:54 21k 2006/03/24 C:\cygwin\bin\cygmenu-8.dll - os=4.0 img=1.0 sys=4.0 "cygmenu-8.dll" v0.0 ts=2006/3/23 23:16 26k 2001/04/25 C:\cygwin\bin\cygmenu5.dll - os=4.0 img=1.0 sys=4.0 "cygmenu5.dll" v0.0 ts=2001/4/24 22:27 20k 2002/01/09 C:\cygwin\bin\cygmenu6.dll - os=4.0 img=1.0 sys=4.0 "cygmenu6.dll" v0.0 ts=2002/1/8 22:03 29k 2003/08/09 C:\cygwin\bin\cygmenu7.dll - os=4.0 img=1.0 sys=4.0 "cygmenu7.dll" v0.0 ts=2003/8/9 2:25 222k 2005/05/28 C:\cygwin\bin\cygmhash-2.dll - os=4.0 img=1.0 sys=4.0 "cygmhash-2.dll" v0.0 ts=2005/5/28 2:40 21k 2004/10/22 C:\cygwin\bin\cygminires.dll - os=4.0 img=1.0 sys=4.0 "cygminires.dll" v0.0 ts=2004/10/22 13:28 330k 2005/08/08 C:\cygwin\bin\cygmng-1.dll - os=4.0 img=1.0 sys=4.0 "cygmng-1.dll" v0.0 ts=2005/8/8 14:17 71k 2004/10/16 C:\cygwin\bin\cygmp-3.dll - os=4.0 img=1.0 sys=4.0 "cygmp-3.dll" v0.0 ts=2004/10/16 0:40 95k 2004/10/16 C:\cygwin\bin\cygmpfr-0.dll - os=4.0 img=1.0 sys=4.0 "cygmpfr-0.dll" v0.0 ts=2004/10/16 0:47 408k 2006/05/11 C:\cygwin\bin\cygnaim_core-0.dll - os=4.0 img=1.0 sys=4.0 "cygnaim_core-0.dll" v0.0 ts=2006/5/10 18:56 67k 2006/03/24 C:\cygwin\bin\cygncurses++-8.dll - os=4.0 img=1.0 sys=4.0 "cygncurses++-8.dll" v0.0 ts=2006/3/23 23:17 156k 2001/04/25 C:\cygwin\bin\cygncurses++5.dll - os=4.0 img=1.0 sys=4.0 "cygncurses++5.dll" v0.0 ts=2001/4/24 22:29 175k 2002/01/09 C:\cygwin\bin\cygncurses++6.dll - os=4.0 img=1.0 sys=4.0 "cygncurses++6.dll" v0.0 ts=2002/1/8 22:03 227k 2006/03/24 C:\cygwin\bin\cygncurses-8.dll - os=4.0 img=1.0 sys=4.0 "cygncurses-8.dll" v0.0 ts=2006/3/23 20:51 226k 2001/04/25 C:\cygwin\bin\cygncurses5.dll - os=4.0 img=1.0 sys=4.0 "cygncurses5.dll" v0.0 ts=2001/4/24 22:17 202k 2002/01/09 C:\cygwin\bin\cygncurses6.dll - os=4.0 img=1.0 sys=4.0 "cygncurses6.dll" v0.0 ts=2002/1/8 22:03 224k 2003/08/09 C:\cygwin\bin\cygncurses7.dll - os=4.0 img=1.0 sys=4.0 "cygncurses7.dll" v0.0 ts=2003/8/9 2:24 91k 2005/11/24 C:\cygwin\bin\cygneon-24.dll - os=4.0 img=1.0 sys=4.0 "cygneon-24.dll" v0.0 ts=2005/11/24 4:21 90k 2006/01/25 C:\cygwin\bin\cygneon-25.dll - os=4.0 img=1.0 sys=4.0 "cygneon-25.dll" v0.0 ts=2006/1/25 3:02 147k 2005/10/23 C:\cygwin\bin\cygnetpbm-10.dll - os=4.0 img=1.0 sys=4.0 "cygnetpbm-10.dll" v0.0 ts=2005/10/23 13:04 23k 2005/08/12 C:\cygwin\bin\cygogg-0.dll - os=4.0 img=1.0 sys=4.0 "cygogg-0.dll" v0.0 ts=2005/8/12 15:39 150k 2005/08/13 C:\cygwin\bin\cygOggFLAC++-2.dll - os=4.0 img=1.0 sys=4.0 "cygOggFLAC++-2.dll" v0.0 ts=2005/8/13 1:09 107k 2005/08/13 C:\cygwin\bin\cygOggFLAC-3.dll - os=4.0 img=1.0 sys=4.0 "cygOggFLAC-3.dll" v0.0 ts=2005/8/13 1:09 49k 2004/08/02 C:\cygwin\bin\cygogrove-0.dll - os=4.0 img=1.0 sys=4.0 "cygogrove-0.dll" v0.0 ts=2004/8/2 8:41 131k 2005/08/21 C:\cygwin\bin\cygopencdk-8.dll - os=4.0 img=1.0 sys=4.0 "cygopencdk-8.dll" v0.0 ts=2005/8/21 8:35 217k 2005/08/01 C:\cygwin\bin\cygORBit-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBit-0.dll" v0.0 ts=2005/8/1 13:29 287k 2005/08/17 C:\cygwin\bin\cygORBit-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBit-2-0.dll" v0.0 ts=2005/8/17 14:45 36k 2005/08/17 C:\cygwin\bin\cygORBit-imodule-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBit-imodule-2-0.dll" v0.0 ts=2005/8/17 15:11 28k 2005/08/01 C:\cygwin\bin\cygORBitCosNaming-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBitCosNaming-0.dll" v0.0 ts=2005/8/1 13:29 16k 2005/08/17 C:\cygwin\bin\cygORBitCosNaming-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBitCosNaming-2-0.dll" v0.0 ts=2005/8/17 15:11 5k 2005/08/01 C:\cygwin\bin\cygORBitutil-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBitutil-0.dll" v0.0 ts=2005/8/1 12:51 1706k 2004/08/02 C:\cygwin\bin\cygosp-4.dll - os=4.0 img=1.0 sys=4.0 "cygosp-4.dll" v0.0 ts=2004/8/2 7:51 326k 2004/08/02 C:\cygwin\bin\cygospgrove-0.dll - os=4.0 img=1.0 sys=4.0 "cygospgrove-0.dll" v0.0 ts=2004/8/2 9:07 1922k 2004/08/02 C:\cygwin\bin\cygostyle-0.dll - os=4.0 img=1.0 sys=4.0 "cygostyle-0.dll" v0.0 ts=2004/8/2 9:07 12k 2006/03/24 C:\cygwin\bin\cygpanel-8.dll - os=4.0 img=1.0 sys=4.0 "cygpanel-8.dll" v0.0 ts=2006/3/23 23:16 15k 2001/04/25 C:\cygwin\bin\cygpanel5.dll - os=4.0 img=1.0 sys=4.0 "cygpanel5.dll" v0.0 ts=2001/4/24 22:27 12k 2002/01/09 C:\cygwin\bin\cygpanel6.dll - os=4.0 img=1.0 sys=4.0 "cygpanel6.dll" v0.0 ts=2002/1/8 22:03 19k 2003/08/09 C:\cygwin\bin\cygpanel7.dll - os=4.0 img=1.0 sys=4.0 "cygpanel7.dll" v0.0 ts=2003/8/9 2:24 198k 2005/07/18 C:\cygwin\bin\cygpango-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpango-1.0-0.dll" v0.0 ts=2005/7/18 4:26 134k 2005/07/18 C:\cygwin\bin\cygpangoft2-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangoft2-1.0-0.dll" v0.0 ts=2005/7/18 4:28 33k 2005/07/18 C:\cygwin\bin\cygpangowin32-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangowin32-1.0-0.dll" v0.0 ts=2005/7/18 4:29 36k 2005/07/18 C:\cygwin\bin\cygpangox-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangox-1.0-0.dll" v0.0 ts=2005/7/18 4:27 22k 2005/07/18 C:\cygwin\bin\cygpangoxft-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangoxft-1.0-0.dll" v0.0 ts=2005/7/18 4:29 176k 2005/09/06 C:\cygwin\bin\cygpcre-0.dll - os=4.0 img=1.0 sys=4.0 "cygpcre-0.dll" v0.0 ts=2005/9/6 13:49 299k 2005/09/06 C:\cygwin\bin\cygpcrecpp-0.dll - os=4.0 img=1.0 sys=4.0 "cygpcrecpp-0.dll" v0.0 ts=2005/9/6 14:26 63k 2003/04/11 C:\cygwin\bin\cygpcreOld.dll - os=4.0 img=1.0 sys=4.0 "cygpcre.dll" v0.0 ts=2003/4/11 1:31 6k 2005/09/06 C:\cygwin\bin\cygpcreposix-0.dll - os=4.0 img=1.0 sys=4.0 "cygpcreposix-0.dll" v0.0 ts=2005/9/6 14:26 1249k 2005/12/30 C:\cygwin\bin\cygperl5_8.dll - os=4.0 img=1.0 sys=4.0 "cygperl5_8.dll" v0.0 ts=2005/12/29 17:48 1063k 2005/10/13 C:\cygwin\bin\cygplot-2.dll - os=4.0 img=1.0 sys=4.0 "cygplot-2.dll" v0.0 ts=2005/10/13 7:30 1229k 2005/10/13 C:\cygwin\bin\cygplotter-2.dll - os=4.0 img=1.0 sys=4.0 "cygplotter-2.dll" v0.0 ts=2005/10/13 8:22 224k 2005/07/11 C:\cygwin\bin\cygpng10.dll - os=4.0 img=1.0 sys=4.0 "cygpng10.dll" v0.0 ts=2005/7/11 16:45 230k 2005/07/11 C:\cygwin\bin\cygpng12.dll - os=4.0 img=1.0 sys=4.0 "cygpng12.dll" v0.0 ts=2005/7/11 16:50 170k 2002/01/21 C:\cygwin\bin\cygpng2.dll - os=4.0 img=1.0 sys=4.0 "cygpng2.dll" v0.0 ts=2002/1/20 17:05 22k 2002/06/09 C:\cygwin\bin\cygpopt-0.dll - os=4.0 img=1.0 sys=4.0 "cygpopt-0.dll" v0.0 ts=2002/6/8 22:45 94k 2006/02/17 C:\cygwin\bin\cygpq.dll - os=4.0 img=1.0 sys=4.0 "cygpq.dll" v0.0 ts=2006/2/16 23:21 575k 2004/10/10 C:\cygwin\bin\cygproj-0.dll - os=4.0 img=1.0 sys=4.0 "cygproj-0.dll" v0.0 ts=2004/10/10 15:57 514k 2005/10/14 C:\cygwin\bin\cygpstoedit-0.dll - os=4.0 img=1.0 sys=4.0 "cygpstoedit-0.dll" v0.0 ts=2005/10/14 8:05 6018k 2005/08/11 C:\cygwin\bin\cygqt-mt-3.dll - os=4.0 img=1.0 sys=4.0 "cygqt-mt-3.dll" v0.0 ts=2005/8/11 15:06 202k 2005/08/11 C:\cygwin\bin\cygqui-1.dll - os=4.0 img=1.0 sys=4.0 "cygqui-1.dll" v0.0 ts=2005/8/11 15:13 108k 2001/06/28 C:\cygwin\bin\cygreadline4.dll - os=4.0 img=1.0 sys=4.0 "cygreadline4.dll" v0.0 ts=2001/1/6 20:34 148k 2003/08/10 C:\cygwin\bin\cygreadline5.dll - os=4.0 img=1.0 sys=4.0 "cygreadline5.dll" v0.0 ts=2003/8/10 16:16 152k 2006/03/25 C:\cygwin\bin\cygreadline6.dll - os=4.0 img=1.0 sys=4.0 "cygreadline6.dll" v0.0 ts=2006/3/25 6:05 704k 2006/01/20 C:\cygwin\bin\cygruby18.dll - os=4.0 img=1.0 sys=4.0 "cygruby18.dll" v0.0 ts=2006/1/20 2:43 78k 2004/10/13 C:\cygwin\bin\cygsasl2-2.dll - os=4.0 img=1.0 sys=4.0 "cygsasl2-2.dll" v0.0 ts=2004/10/13 15:50 380k 2003/12/13 C:\cygwin\bin\cygsmi-2.dll - os=4.0 img=1.0 sys=4.0 "cygsmi-2.dll" v0.0 ts=2003/12/12 16:57 129k 2005/08/15 C:\cygwin\bin\cygspeex-1.dll - os=4.0 img=1.0 sys=4.0 "cygspeex-1.dll" v0.0 ts=2005/8/15 2:57 230k 2006/06/01 C:\cygwin\bin\cygssl-0.9.7.dll - os=4.0 img=1.0 sys=4.0 "cygssl-0.9.7.dll" v0.0 ts=2006/6/1 8:50 214k 2006/06/01 C:\cygwin\bin\cygssl-0.9.8.dll - os=4.0 img=1.0 sys=4.0 "cygssl-0.9.8.dll" v0.0 ts=2006/6/1 9:08 165k 2003/04/11 C:\cygwin\bin\cygssl.dll - os=4.0 img=1.0 sys=4.0 "cygssl.dll" v0.0 ts=2003/4/11 3:37 28k 2004/11/15 C:\cygwin\bin\cygstartup-notification-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygstartup-notification-1-0.dll" v0.0 ts=2004/11/14 19:59 203k 2006/03/14 C:\cygwin\bin\cygsvn_client-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_client-1-0.dll" v0.0 ts=2006/3/14 9:13 45k 2006/03/14 C:\cygwin\bin\cygsvn_delta-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_delta-1-0.dll" v0.0 ts=2006/3/14 9:07 38k 2006/03/14 C:\cygwin\bin\cygsvn_diff-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_diff-1-0.dll" v0.0 ts=2006/3/14 9:12 30k 2006/03/14 C:\cygwin\bin\cygsvn_fs-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_fs-1-0.dll" v0.0 ts=2006/3/14 9:09 172k 2006/03/14 C:\cygwin\bin\cygsvn_fs_base-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_fs_base-1-0.dll" v0.0 ts=2006/3/14 9:08 127k 2006/03/14 C:\cygwin\bin\cygsvn_fs_fs-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_fs_fs-1-0.dll" v0.0 ts=2006/3/14 9:07 21k 2006/03/14 C:\cygwin\bin\cygsvn_ra-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra-1-0.dll" v0.0 ts=2006/3/14 9:13 133k 2006/03/14 C:\cygwin\bin\cygsvn_ra_dav-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra_dav-1-0.dll" v0.0 ts=2006/3/14 9:12 42k 2006/03/14 C:\cygwin\bin\cygsvn_ra_local-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra_local-1-0.dll" v0.0 ts=2006/3/14 9:09 87k 2006/03/14 C:\cygwin\bin\cygsvn_ra_svn-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra_svn-1-0.dll" v0.0 ts=2006/3/14 9:10 150k 2006/03/14 C:\cygwin\bin\cygsvn_repos-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_repos-1-0.dll" v0.0 ts=2006/3/14 9:09 187k 2006/03/14 C:\cygwin\bin\cygsvn_subr-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_subr-1-0.dll" v0.0 ts=2006/3/14 9:07 50k 2006/03/14 C:\cygwin\bin\cygsvn_swig_perl-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_swig_perl-1-0.dll" v0.0 ts=2006/3/14 9:18 172k 2006/03/14 C:\cygwin\bin\cygsvn_swig_py-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_swig_py-1-0.dll" v0.0 ts=2006/3/14 9:16 187k 2006/03/14 C:\cygwin\bin\cygsvn_swig_ruby-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_swig_ruby-1-0.dll" v0.0 ts=2006/3/14 9:21 200k 2006/03/14 C:\cygwin\bin\cygsvn_wc-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_wc-1-0.dll" v0.0 ts=2006/3/14 9:12 228k 2005/08/15 C:\cygwin\bin\cygt1-5.dll - os=4.0 img=1.0 sys=4.0 "cygt1-5.dll" v0.0 ts=2005/8/15 7:44 16k 2005/08/15 C:\cygwin\bin\cygt1x-5.dll - os=4.0 img=1.0 sys=4.0 "cygt1x-5.dll" v0.0 ts=2005/8/15 7:45 65k 2005/08/21 C:\cygwin\bin\cygtasn1-2.dll - os=4.0 img=1.0 sys=4.0 "cygtasn1-2.dll" v0.0 ts=2005/8/21 7:20 247k 2004/12/07 C:\cygwin\bin\cygtidy-0-99-0.dll - os=4.0 img=1.0 sys=4.0 "cygtidy-0-99-0.dll" v0.0 ts=2004/12/7 6:34 304k 2005/07/10 C:\cygwin\bin\cygtiff-5.dll - os=4.0 img=1.0 sys=4.0 "cygtiff-5.dll" v0.0 ts=2005/7/10 16:18 281k 2003/02/24 C:\cygwin\bin\cygtiff3.dll - os=4.0 img=1.0 sys=4.0 "cygtiff3.dll" v0.0 ts=2003/2/23 20:58 282k 2003/08/11 C:\cygwin\bin\cygtiff4.dll - os=4.0 img=1.0 sys=4.0 "cygtiff4.dll" v0.0 ts=2003/8/10 19:32 281k 2005/07/10 C:\cygwin\bin\cygtiffxx-5.dll - os=4.0 img=1.0 sys=4.0 "cygtiffxx-5.dll" v0.0 ts=2005/7/10 16:21 27k 2005/10/23 C:\cygwin\bin\cygungif-4.dll - os=4.0 img=1.0 sys=4.0 "cygungif-4.dll" v0.0 ts=2005/10/23 13:11 45k 2006/04/15 C:\cygwin\bin\cygusb0.dll - os=4.0 img=1.0 sys=4.0 "cygusb0.dll" v0.0 ts=2006/4/15 3:41 174k 2005/08/14 C:\cygwin\bin\cygvorbis-0.dll - os=4.0 img=1.0 sys=4.0 "cygvorbis-0.dll" v0.0 ts=2005/8/14 12:15 1125k 2005/08/14 C:\cygwin\bin\cygvorbisenc-2.dll - os=4.0 img=1.0 sys=4.0 "cygvorbisenc-2.dll" v0.0 ts=2005/8/14 12:20 42k 2005/08/14 C:\cygwin\bin\cygvorbisfile-3.dll - os=4.0 img=1.0 sys=4.0 "cygvorbisfile-3.dll" v0.0 ts=2005/8/14 12:20 154k 2004/08/11 C:\cygwin\bin\cygWand-6.dll - os=4.0 img=1.0 sys=4.0 "cygWand-6.dll" v0.0 ts=2004/8/10 23:04 314k 2005/08/10 C:\cygwin\bin\cygwmf-0-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygwmf-0-2-7.dll" v0.0 ts=2005/8/10 6:54 150k 2005/08/10 C:\cygwin\bin\cygwmflite-0-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygwmflite-0-2-7.dll" v0.0 ts=2005/8/10 6:53 152k 2006/02/08 C:\cygwin\bin\cygwnck-1-18.dll - os=4.0 img=1.0 sys=4.0 "cygwnck-1-18.dll" v0.0 ts=2006/2/7 19:10 2689k 2002/11/16 C:\cygwin\bin\cygxerces-c21.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c21.dll" v0.0 ts=2002/11/15 20:07 2984k 2003/02/07 C:\cygwin\bin\cygxerces-c22.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c22.dll" v0.0 ts=2003/2/7 10:50 3006k 2003/10/12 C:\cygwin\bin\cygxerces-c23.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c23.dll" v0.0 ts=2003/10/11 19:36 3520k 2003/12/16 C:\cygwin\bin\cygxerces-c24.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c24.dll" v0.0 ts=2003/12/16 11:45 3416k 2004/02/21 C:\cygwin\bin\cygxerces-c25.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c25.dll" v0.0 ts=2004/2/20 22:49 95k 2005/10/13 C:\cygwin\bin\cygxmi-0.dll - os=4.0 img=1.0 sys=4.0 "cygxmi-0.dll" v0.0 ts=2005/10/13 7:33 408k 2005/08/01 C:\cygwin\bin\cygxml-1.dll - os=4.0 img=1.0 sys=4.0 "cygxml-1.dll" v0.0 ts=2005/8/1 12:43 1430k 2005/11/18 C:\cygwin\bin\cygxml2-2.dll - os=4.0 img=1.0 sys=4.0 "cygxml2-2.dll" v0.0 ts=2005/11/18 9:48 45k 2006/04/18 C:\cygwin\bin\cygXpm-noX4.dll - os=4.0 img=1.0 sys=4.0 "cygXpm-noX4.dll" v0.0 ts=2006/4/17 22:06 200k 2005/12/10 C:\cygwin\bin\cygxslt-1.dll - os=4.0 img=1.0 sys=4.0 "cygxslt-1.dll" v0.0 ts=2005/12/9 16:43 65k 2005/08/23 C:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0 "cygz.dll" v0.0 ts=2005/8/22 19:03 78k 2005/11/10 C:\cygwin\bin\cygzvt-2.dll - os=4.0 img=1.0 sys=4.0 "cygzvt-2.dll" v0.0 ts=2005/11/10 13:06 1831k 2006/07/01 C:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0 "cygwin1.dll" v0.0 ts=2006/6/30 23:22 Cygwin DLL version info: DLL version: 1.5.20 DLL epoch: 19 DLL bad signal mask: 19005 DLL old termios: 5 DLL malloc env: 28 API major: 0 API minor: 156 Shared data: 4 DLL identifier: cygwin1 Mount registry: 2 Cygnus registry name: Cygnus Solutions Cygwin registry name: Cygwin Program options name: Program Options Cygwin mount registry name: mounts v2 Cygdrive flags: cygdrive flags Cygdrive prefix: cygdrive prefix Cygdrive default prefix: Build date: Sat Jul 1 02:22:36 EDT 2006 Shared id: cygwin1S4 26k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygDtPrint-1.dll - os=4.0 img=1.0 sys=4.0 "cygDtPrint-1.dll" v0.0 ts=2005/9/21 16:31 20k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygfontenc-1.dll - os=4.0 img=1.0 sys=4.0 "cygfontenc-1.dll" v0.0 ts=2005/10/26 12:14 282k 2003/10/28 C:\cygwin\usr\X11R6\bin\cygfreetype-9.dll - os=4.0 img=1.0 sys=4.0 "cygfreetype-9.dll" v0.0 ts=2003/10/17 23:44 34k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygFS-6.dll - os=4.0 img=1.0 sys=4.0 "cygFS-6.dll" v0.0 ts=2005/10/26 10:52 357k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygGL-1.dll - os=4.0 img=1.0 sys=4.0 "cygGL-1.dll" v0.0 ts=2005/10/26 11:30 441k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygGLU-1.dll - os=4.0 img=1.0 sys=4.0 "cygGLU-1.dll" v0.0 ts=2005/10/26 11:48 140k 2004/08/06 C:\cygwin\usr\X11R6\bin\cygglut-3.dll - os=4.0 img=1.0 sys=4.0 "cygglut-3.dll" v0.0 ts=2004/8/6 7:43 74k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygICE-6.dll - os=4.0 img=1.0 sys=4.0 "cygICE-6.dll" v0.0 ts=2005/10/26 10:11 74k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygMrm-2.dll - os=4.0 img=1.0 sys=4.0 "cygMrm-2.dll" v0.0 ts=2005/9/21 16:30 8k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygoldX-6.dll - os=4.0 img=1.0 sys=4.0 "cygoldX-6.dll" v0.0 ts=2005/10/26 10:09 1662k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygOSMesa-4.dll - os=4.0 img=1.0 sys=4.0 "cygOSMesa-4.dll" v0.0 ts=2005/10/26 11:32 41k 2002/05/14 C:\cygwin\usr\X11R6\bin\cygPropList-0.dll - os=4.0 img=1.0 sys=4.0 "cygPropList-0.dll" v0.0 ts=2002/5/13 20:13 28k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygSM-6.dll - os=4.0 img=1.0 sys=4.0 "cygSM-6.dll" v0.0 ts=2005/10/26 10:12 63k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygUil-2.dll - os=4.0 img=1.0 sys=4.0 "cygUil-2.dll" v0.0 ts=2005/9/21 16:31 884k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygX11-6.dll - os=4.0 img=1.0 sys=4.0 "cygX11-6.dll" v0.0 ts=2005/10/26 10:07 8k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXau-6.dll - os=4.0 img=1.0 sys=4.0 "cygXau-6.dll" v0.0 ts=2005/10/26 9:31 250k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXaw-6.dll - os=4.0 img=1.0 sys=4.0 "cygXaw-6.dll" v0.0 ts=2005/10/26 10:33 354k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXaw-7.dll - os=4.0 img=1.0 sys=4.0 "cygXaw-7.dll" v0.0 ts=2005/10/26 10:39 360k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXaw-8.dll - os=4.0 img=1.0 sys=4.0 "cygXaw-8.dll" v0.0 ts=2005/10/26 10:45 275k 2004/01/13 C:\cygwin\usr\X11R6\bin\cygXaw3d-7.dll - os=4.0 img=1.0 sys=4.0 "cygXaw3d-7.dll" v0.0 ts=2004/1/13 14:17 7k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXcomposite-1.dll - os=4.0 img=1.0 sys=4.0 "cygXcomposite-1.dll" v0.0 ts=2005/10/26 12:04 30k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXcursor-1.dll - os=4.0 img=1.0 sys=4.0 "cygXcursor-1.dll" v0.0 ts=2005/10/26 12:03 8k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXdamage-1.dll - os=4.0 img=1.0 sys=4.0 "cygXdamage-1.dll" v0.0 ts=2005/10/26 12:02 16k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXdmcp-6.dll - os=4.0 img=1.0 sys=4.0 "cygXdmcp-6.dll" v0.0 ts=2005/10/26 9:34 7k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXevie-1.dll - os=4.0 img=1.0 sys=4.0 "cygXevie-1.dll" v0.0 ts=2005/10/26 12:01 50k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXext-6.dll - os=4.0 img=1.0 sys=4.0 "cygXext-6.dll" v0.0 ts=2005/10/26 10:14 15k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXfixes-3.dll - os=4.0 img=1.0 sys=4.0 "cygXfixes-3.dll" v0.0 ts=2005/10/26 12:02 56k 2004/03/11 C:\cygwin\usr\X11R6\bin\cygXft-1.dll - os=4.0 img=1.0 sys=4.0 "cygXft-1.dll" v0.0 ts=2003/11/17 17:42 63k 2004/03/23 C:\cygwin\usr\X11R6\bin\cygXft-2.dll - os=4.0 img=1.0 sys=4.0 "cygXft-2.dll" v0.0 ts=2004/3/23 14:20 26k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXi-6.dll - os=4.0 img=1.0 sys=4.0 "cygXi-6.dll" v0.0 ts=2005/10/26 10:48 121k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxkbfile-1.dll - os=4.0 img=1.0 sys=4.0 "cygxkbfile-1.dll" v0.0 ts=2005/10/26 10:54 11k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxkbui-1.dll - os=4.0 img=1.0 sys=4.0 "cygxkbui-1.dll" v0.0 ts=2005/10/26 10:54 1185k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygXm-2.dll - os=4.0 img=1.0 sys=4.0 "cygXm-2.dll" v0.0 ts=2005/9/21 16:27 459k 2004/02/10 C:\cygwin\usr\X11R6\bin\cygXmHTML-0.dll - os=4.0 img=1.0 sys=4.0 "cygXmHTML-0.dll" v0.0 ts=2004/2/10 12:14 74k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXmu-6.dll - os=4.0 img=1.0 sys=4.0 "cygXmu-6.dll" v0.0 ts=2005/10/26 10:22 10k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXmuu-1.dll - os=4.0 img=1.0 sys=4.0 "cygXmuu-1.dll" v0.0 ts=2005/10/26 10:23 26k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXp-6.dll - os=4.0 img=1.0 sys=4.0 "cygXp-6.dll" v0.0 ts=2005/10/26 10:27 54k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXpm-4.dll - os=4.0 img=1.0 sys=4.0 "cygXpm-4.dll" v0.0 ts=2005/10/26 10:26 10k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXrandr-2.dll - os=4.0 img=1.0 sys=4.0 "cygXrandr-2.dll" v0.0 ts=2005/10/26 11:58 30k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXrender-1.dll - os=4.0 img=1.0 sys=4.0 "cygXrender-1.dll" v0.0 ts=2005/10/26 11:52 7k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXRes-1.dll - os=4.0 img=1.0 sys=4.0 "cygXRes-1.dll" v0.0 ts=2005/10/26 12:00 38k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxrx-6.dll - os=4.0 img=1.0 sys=4.0 "cygxrx-6.dll" v0.0 ts=2005/10/26 13:13 24k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxrxnest-6.dll - os=4.0 img=1.0 sys=4.0 "cygxrxnest-6.dll" v0.0 ts=2005/10/26 13:14 283k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXt-6.dll - os=4.0 img=1.0 sys=4.0 "cygXt-6.dll" v0.0 ts=2005/10/26 10:19 27k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXTrap-6.dll - os=4.0 img=1.0 sys=4.0 "cygXTrap-6.dll" v0.0 ts=2005/10/26 12:00 17k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXtst-6.dll - os=4.0 img=1.0 sys=4.0 "cygXtst-6.dll" v0.0 ts=2005/10/26 10:49 578k 2006/03/24 C:\cygwin\lib\lapack\cygblas.dll - os=4.0 img=1.0 sys=4.0 "cygblas.dll" v0.0 ts=2006/3/23 21:30 4887k 2006/03/24 C:\cygwin\lib\lapack\cyglapack.dll - os=4.0 img=1.0 sys=4.0 "cyglapack.dll" v0.0 ts=2006/3/23 21:30 Service : sshd Display name : CYGWIN sshd Current State : Stopped Command : /usr/sbin/sshd -D stdin path : /dev/null stdout path : /var/log/sshd.log stderr path : /var/log/sshd.log Environment : CYGWIN="'ntsec notraverse'" Process Type : Own Process Startup : Automatic Account : LocalSystem Cygwin Package Information Last downloaded files to: C:\cygwin Last downloaded files from: http://mirrors.kernel.org/sources.redhat.com/cygwin Package Version _update-info-dir 00409-1 a2ps 4.13-1 aalib 1.4rc5-1 aalib-devel 1.4rc5-1 agetty 2.1-2 alternatives 1.3.20a-2 antiword 0.34-2 apache 1.3.33-2 apache2 2.2.2-1 apache2-devel 2.2.2-1 apache2-manual 2.2.2-1 apr 0.9.7-1 apr-util 0.9.7-1 apr1 1.2.7-1 aprutil1 1.2.7-1 ash 20040127-3 aspell 0.50.3-1 aspell-de 0.50.2-1 aspell-dev 0.50.3-1 aspell-doc 0.50.3-1 aspell-en 0.51.0-1 aspell-pl 0.50.2-1 astyle 1.15.3-3 atk 1.9.1-1 atk-devel 1.9.1-1 atk-doc 1.9.1-1 atk-runtime 1.9.1-1 audiofile 0.2.6-2 autoconf 2.59-2 autoconf-devel 2.59-2 autoconf-stable 2.13-6 autoconf2.1 2.13-1 autoconf2.5 2.59-2 automake 1.7.9-2 automake-devel 1.9.2-2 automake-stable 1.4p6-3 automake1.4 1.4p6-3 automake1.5 1.5-1 automake1.6 1.6.3-2 automake1.7 1.7.9-2 automake1.8 1.8.5-2 automake1.9 1.9.6-1 autossh 1.4a-1 base-files 3.7-1 base-passwd 2.2-1 bash 3.1-6 bash-completion 20060301-1 bashdb 3.1_0.05-1 bashdb3 0.02-1 bc 1.06-2 binutils 20060709-1 bison 2.3-1 boost 1.33.1-2 boost-devel 1.33.1-2 bsflite 0.81p2-1 byacc 1.9-1 bzip2 1.0.3-1 bzr 0.8.2-1 c-client 2002e-3 c3270 3.3.4p7-1 cabextract 1.1-1 cadaver 0.22.2-1 cairo 1.0.2-1 cairo-doc 1.0.2-1 catgets 1.0-1 ccache 2.2-1 ccdoc 0.8.41-2 ccrypt 1.7-1 cgoban 1.9.14-2 check 0.9.1-1 checkx 0.1.0-1 chere 0.6-4 chkconfig 1.2.24h-1 clamav 0.88.2-1 clear 1.0-2 clisp 2.38-1 cmake 2.4.2-1 cocom 0.995-1 compface 1.5.2-1 coreutils 5.97-1 cpio 2.6-5 cppunit 1.9.14-1 cramfs 1.1-1 cron 3.0.1-19 crypt 1.1-1 ctags 5.6-1 ctetris 0.30-1 curl 7.15.4-1 curl-devel 7.15.4-1 cvs 1.11.17-1 cvsutils 0.2.3-1 cygipc 2.03-2 cygport 0.1.93-1 cygrunsrv 1.17-1 cygutils 1.3.0-1 cygwin 1.5.20-1 cygwin-doc 1.4-3 cygwin-x-doc 1.0.4-1 cyrus-sasl 2.1.19-3 d 1.2.0-1 db2 2.7.7-4 db3.1 3.1.17-2 db4.1 4.1.25-1 db4.2 4.2.52-1 db4.3 4.3.28-1 ddd 3.3.9-1 dejagnu 20021217-2 desktop-file-utils 0.10-1 diff 1.0-1 diffstat 1.42-2 diffutils 2.8.7-1 distcc 2.18.3-1 dmalloc 5.4.2-2 docbook-xml412 4.1.2-1 docbook-xml42 4.2-3 docbook-xml43 4.3-1 docbook-xml44 4.4-1 docbook-xsl 1.69.1-1 doxygen 1.4.6-1 dpkg 1.10.4-2 e2fsimage 0.2.0-2 e2fsprogs 1.35-3 ec-fonts-mftraced 1.0.8-4 ed 0.2-1 editrights 1.01-1 ELFIO 1.0.2-1 emacs 21.2-13 emacs-el 21.2-13 emacs-leim 21.3.50-2 emacs-X11 21.2-13 email 2.5.0-1 enscript 1.6.4-1 epstool 3.08-1 esound 0.2.36-1 exif 0.6.9-2 exim 4.62-1 expat 1.95.8-1 expect 20030128-1 fetchmail 6.3.1-1 fftw3 3.0.1-2 fftw3-dev 3.0.1-2 fftw3-doc 3.0.1-2 figlet 2.2-1 file 4.16-1 fileutils 4.1-3 findutils 4.2.27-1 flac 1.1.2-1 flac-devel 1.1.2-1 flex 2.5.4a-3 fltk 1.1.4-2 fontconfig 2.2.2-1 fortune 1.99.1-1 freeglut 2.2.0-1 freetype2 2.1.9-1 fvwm 2.4.7-3 gail 1.8.8-1 gawk 3.1.5-4 gcc 3.4.4-1 gcc-ada 3.4.4-1 gcc-core 3.4.4-1 gcc-g++ 3.4.4-1 gcc-g77 3.4.4-1 gcc-gdc 3.4.4-1 gcc-gm2 3.3.3-1 gcc-gpc 3.3.3-3 gcc-java 3.4.4-1 gcc-mingw 20040810-1 gcc-mingw-ada 20050522-1 gcc-mingw-core 20050522-1 gcc-mingw-g++ 20050522-1 gcc-mingw-g77 20050522-1 gcc-mingw-gdc 20050522-1 gcc-mingw-gpc 20040810-1 gcc-mingw-java 20050522-1 gcc-mingw-objc 20050522-1 gcc-objc 3.4.4-1 gcc2 2.95.3-10 GConf2 2.10.1-1 gd 2.0.33-1 gdb 20060706-2 gdbm 1.8.3-7 gdk-pixbuf 0.22.0-4 gdk-pixbuf-devel 0.22.0-4 gdk-pixbuf-doc 0.22.0-4 geoip 1.3.14-1 gettext 0.14.5-1 gettext-devel 0.14.5-1 ghostscript 8.50-1 ghostscript-base 8.50-1 ghostscript-x11 8.50-1 glib 1.2.10-3 glib-devel 1.2.10-3 glib2 2.6.6-2 glib2-devel 2.6.6-2 glib2-doc 2.6.6-2 glib2-runtime 2.6.6-2 glitz 0.4.4-2 gmp 4.1.4-2 gnome-common 2.12.0-1 gnome-icon-theme 2.10.1-1 gnome-keyring 0.4.7-1 gnome-libs 1.4.2-3 gnome-libs-devel 1.4.2-3 gnome-libs-doc 1.4.2-3 gnome-mime-data 2.4.2-1 gnome-themes 2.12.3-1 gnome-vfs2 2.12.2-1 gnome-vfs2-devel 2.12.2-1 gnome-vfs2-doc 2.12.2-1 gnubg 0.14.3-1 gnugo 3.7.10-1 gnupg 1.4.2.1-1 gnuplot 4.0.0-1 gnutls 1.0.25-2 gnutls-devel 1.0.25-2 gnutls-doc 1.0.25-2 gperf 2.7.2-1 grace 5.1.19-1 GraphicsMagick 1.0.6-1 grep 2.5.1a-2 groff 1.18.1-2 gsl 1.8-1 gsl-apps 1.8-1 gsl-devel 1.8-1 gsl-doc 1.8-1 gtk+ 1.2.10-2 gtk+-devel 1.2.10-2 gtk-doc 1.3-1 gtk-engines 0.12-2 gtk2-x11 2.6.10-1 gtk2-x11-devel 2.6.10-1 gtk2-x11-doc 2.6.10-1 gtk2-x11-engines 2.6.7-1 gtk2-x11-runtime 2.6.10-1 gtypist 2.7-2 guile 1.6.7-4 guile-devel 1.6.7-4 guile-doc 1.6.7-4 gv 3.6.1-1 gvim 6.4-1 gzip 1.3.5-2 help2man 1.35.1-1 hexedit 1.2.10-1 hicolor-icon-theme 0.5-1 httptunnel 3.3-1 ImageMagick 6.0.4-1 imlib 1.9.14-3 indent 2.2.9-1 inetutils 1.3.2-35 initscripts 0.9-1 intltool 0.33-1 ioperm 0.4-1 irc 20010101-3 jasper 1.701.0-1 jbigkit 1.5-3 jgraph 8.3-1 jikes 1.22-1 joe 3.4-1 jpeg 6b-11 keychain 2.5.3.1-1 lablgtk2 2.4.0-2 lapack 3.0-5 lcms 1.14-1 less 381-1 lesstif 0.94.4-1 lftp 2.6.10-2 libaa1 1.4rc5-1 libao 0.8.6-1 libao-devel 0.8.6-1 libao2 0.8.6-1 libapr0 0.9.7-1 libapr1 1.2.7-1 libaprutil0 0.9.7-1 libaprutil1 1.2.7-1 libart_lgpl 1.4.2-3 libart_lgpl2 2.3.17-1 libaspell15 0.50.3-1 libaudiofile-devel 0.2.6-2 libaudiofile0 0.2.6-2 libbonobo2 2.10.1-1 libbonobo2-devel 2.10.1-1 libbonobo2-doc 2.10.1-1 libbonobo20 2.10.1-1 libbonoboui2 2.10.1-1 libbz2_0 1.0.2-1 libbz2_1 1.0.3-1 libcairo2 1.0.2-1 libcharset1 1.9.2-2 libcroco 0.5.1-2 libcroco06 0.6.0-1 libcurl2 7.11.1-3 libcurl3 7.15.4-1 libdb2 2.7.7-4 libdb2-devel 2.7.7-4 libdb3.1 3.1.17-2 libdb3.1-devel 3.1.17-2 libdb4.1 4.1.25-1 libdb4.1-devel 4.1.25-1 libdb4.2 4.2.52-1 libdb4.2-devel 4.2.52-1 libdb4.3 4.3.28-1 libdb4.3-devel 4.3.28-1 libEMF 1.0.3-1 libEMF-devel 1.0.3-1 libEMF1 1.0.3-1 libesound-devel 0.2.36-1 libesound0 0.2.36-1 libexif 0.6.12-1 libexif10 0.6.9-2 libFLAC++5 1.1.2-1 libFLAC7 1.1.2-1 libfontconfig-devel 2.2.2-1 libfontconfig1 2.2.2-1 libfpx 1.2.0.12-1 libfreetype2-devel 2.1.9-1 libfreetype26 2.1.9-1 libgc 6.4-1 libgcrypt 1.2.1-1 libgd-devel 2.0.33-1 libgd2 2.0.33-1 libgdbm 1.8.0-5 libgdbm-devel 1.8.3-7 libgdbm3 1.8.3-3 libgdbm4 1.8.3-7 libgeotiff 1.2.2-1 libgeotiff-devel 1.2.2-1 libgeotiff1 1.2.2-1 libgettextpo0 0.14.5-1 libggi2 2.2.1-1 libggi2-devel 2.2.1-1 libggi2-display-aa 2.2.1-1 libggi2-display-file 2.2.1-1 libggi2-display-terminfo 2.2.1-1 libggi2-display-x 2.2.1-1 libggi2-samples 2.2.1-1 libggimisc2 2.2.1-1 libggimisc2-devel 2.2.1-1 libggimisc2-samples 2.2.1-1 libggiwmh0 0.3.1-1 libggiwmh0-devel 0.3.1-1 libggiwmh0-display-x 0.3.1-1 libggiwmh0-samples 0.3.1-1 libgii1 1.0.1-1 libgii1-devel 1.0.1-1 libgii1-input-x 1.0.1-1 libglade2 2.5.1-1 libglitz-glx1 0.4.4-2 libglitz1 0.4.4-2 libgnome 1.4.2-3 libgnome2 2.12.0.1-1 libgnome2-devel 2.12.0.1-1 libgnome2-doc 2.12.0.1-1 libgnomecanvas2 2.12.0-1 libgnomecanvas2-devel 2.12.0-1 libgnomecanvas2-doc 2.12.0-1 libgnomecanvaspixbuf 0.22.0-4 libgnomeprint22 2.10.3-1 libgnomeprintui22 2.10.2-1 libgnomesupport 1.4.2-3 libgnomeui 1.4.2-3 libgnomeui2 2.12.1-1 libgnomeui2-devel 2.12.1-1 libgnomeui2-doc 2.12.1-1 libgnorba 1.4.2-3 libgnutls11 1.0.25-2 libgpg-error 1.1-1 libGraphicsMagick-devel 1.0.6-1 libGraphicsMagick0 1.0.6-1 libgtkhtml2 2.6.3-2 libgtkhtml2-devel 2.6.3-2 libgtkxmhtml 1.4.2-3 libguile12 1.6.7-4 libguile12abi13 1.6.4-3 libguile14 1.5.6-5 libguile16 1.7.1.20041006-1 libiconv 1.9.2-2 libiconv2 1.9.2-2 libIDL 0.5.17-2 libIDL2 0.8.6-1 libintl 0.10.38-3 libintl1 0.10.40-1 libintl2 0.12.1-3 libintl3 0.14.5-1 libjpeg62 6b-11 libjpeg6b 6b-8 libkpathsea3 2.0.2-15 libkpathsea3abi13 2.0.2-2 libkpathsea4 3.0.0-3 libltdl3 1.5.22-1 libltdl6 1.9f_20041024-1 libMagick-devel 6.0.4-1 libMagick6 6.0.4-1 libmcrypt 2.5.7-2 libmcrypt-devel 2.5.7-2 libmng 1.0.9-1 libncurses-devel 5.5-2 libncurses5 5.2-1 libncurses6 5.2-8 libncurses7 5.3-4 libncurses8 5.5-2 libneon24 0.24.7-2 libneon25 0.25.5-1 libnetpbm-devel 10.30-1 libnetpbm10 10.30-1 libogg 1.1.2-1 libogg-devel 1.1.2-1 libogg0 1.1.2-1 libOggFLAC++2 1.1.2-1 libOggFLAC3 1.1.2-1 libopencdk8 0.5.7-1 libopenldap2 2.1.25-1 libopenldap2_2_7 2.2.26-2 libpcre 4.1-2 libpcre0 6.3-1 libplot2 2.4.1-1 libploticus 2.32-1 libplotter2 2.4.1-1 libpng 1.2.8-2 libpng10 1.0.18-2 libpng10-devel 1.0.18-2 libpng12 1.2.8-2 libpng12-devel 1.2.8-2 libpng2 1.0.12-1 libpopt0 1.6.4-4 libproj-devel 4.4.8-1 libproj0 4.4.8-1 libPropList 0.10.1-3 libreadline4 4.1-2 libreadline5 4.3-5 libreadline6 5.1-5 libsasl2 2.1.19-3 libsasl2-devel 2.1.19-3 libsmi 0.4.2-1 libspeex1 1.1.10-1 libtasn1 0.2.15-1 libtiff-devel 3.7.3-1 libtiff3 3.6.0-2 libtiff4 3.6.0-5 libtiff5 3.7.3-1 libtool 1.5b-2 libtool-devel 1.5.10-2 libtool-stable 1.4.3-3 libtool1.5 1.5.22-1 libungif 4.1.4-1 libungif4 4.1.4-1 libusb-win32 0.1.10.1-3 libvorbis 1.1.1-1 libvorbis-devel 1.1.1-1 libvorbis0 1.1.1-1 libvorbisenc2 1.1.1-1 libvorbisfile3 1.1.1-1 libwmf 0.2.8.4-1 libwnck 2.12.3-1 libwnck-devel 2.12.3-1 libwnck-doc 2.12.3-1 libwnck1_18 2.12.3-1 libxerces-c21 2.1.0-1 libxerces-c22 2.2.0-1 libxerces-c23 2.3.0-4 libxerces-c24 2.4.0-4 libxerces-c25 2.5.0-1 libXft 2.1.6-1 libXft-devel 2.1.6-1 libXft1 1.0.0-1 libXft2 2.1.6-1 libxmi0 2.4.1-1 libxml 1.8.17-2 libxml2 2.6.22-1 libxml2-devel 2.6.22-1 libxml2-doc 2.6.22-1 libxml2-python 2.6.22-1 libxslt 1.1.15-2 libzvt 1.4.2-3 lighttpd 1.4.9-1 lilypond 2.6.4-1 lilypond-doc 2.6.4-1 links 0.99pre14-1 login 1.9-7 lynx 2.8.5-4 m4 1.4.4-1 make 3.81-1 man 1.5p-1 mathomatic 12.5.17-1 mc 4.6.1-2 mhash 0.9.2-1 mhash-devel 0.9.1-1 mined 2000.12-3 mingw-bzip2 1.0.3-1 mingw-libbz2_1 1.0.3-1 mingw-runtime 3.10-1 mingw-zlib 1.2.2-2 minires 1.00-1 minires-devel 1.00-1 mktemp 1.5-3 mod_auth_mysql 1.11-1 mod_auth_ntsec 1.7-1 mod_dav 1.0.3-1.3.6-1 mod_php4 4.2.0-2 mod_ssl 2.8.8-1.3.24-1 monotone 0.27-1 more 2.11o-3 mt 2.3.1-1 mtd 20050419-1 mutt 1.4.2.1i-1 naim 0.11.8.2-1 nano 1.2.2-1 nasm 0.98.39-1 ncftp 3.1.7-1 ncurses 5.5-2 ncurses-demo 5.5-2 nedit 5.5-1 neon 0.25.5-1 netcat 1.10-2 netpbm 10.30-1 netpbm-doc 10.30-1 newlib-man 20020801 nfs-server 2.3-4 Numeric 24.2-1 ocaml 3.08.1-1 octave 2.1.73-1 octave-doc 2.1.73-1 octave-forge 2006.03.17-1 octave-headers 2.1.73-1 octave-htmldoc 2.1.73-1 octave-info 2.1.73-1 octave-otags 2.1.73-1 openbox 0.99.1-4 opencdk 0.5.7-1 opengl 1.1.0-8 openjade 1.3.3-1 openldap 2.2.26-2 openldap-devel 2.2.26-2 OpenSP 1.5.1-1 openssh 4.3p2-3 openssl 0.9.8b-1 openssl-devel 0.9.8b-1 openssl096 0.9.6j-1 openssl097 0.9.7j-1 ORBit 0.5.17-2 ORBit-devel 0.5.17-2 ORBit2 2.12.3-1 ORBit2-devel 2.12.3-1 orpie 1.4.3-1 pango 1.8.1-1 pango-devel 1.8.1-1 pango-doc 1.8.1-1 pango-runtime 1.8.1-1 par 1.52-1 patch 2.5.8-8 patchutils 0.2.31-1 pcre 6.3-1 pcre-devel 6.3-1 pcre-doc 6.3-1 pdksh 5.2.14-3 perl 5.8.7-5 perl-ExtUtils-Depends 0.205-1 perl-ExtUtils-PkgConfig 1.07-1 perl-libwin32 0.26-1 perl-Tk 804.027-4 perl-Win32-GUI 1.03-1 perl_manpages 5.8.7-5 pine 4.58-1 pinfo 0.6.8-1 ping 1.0-1 pkg-config 0.20-1 pkgconfig 0.17.2-3 ploticus 2.32-1 ploticus-common 2.32-1 ploticus-doc 2.32-1 plotutils 2.4.1-1 plotutils-devel 2.4.1-1 plotutils-doc 2.4.1-1 popt 1.6.4-4 postgresql 8.0.7-1 pr3270 3.2.20-1 pr3287 3.3.4p7-1 procmail 3.22-10 procps 3.2.6-1 proftpd 1.2.10-1 proj 4.4.8-1 psmisc 21.5-2 pstoedit 3.42-1 pstoedit-devel 3.42-1 psutils 1.17-1 pygtk2 2.6.3-1 python 2.4.3-1 qt3 3.3.4-2 qt3-bin 3.3.4-2 qt3-devel 3.3.4-2 qt3-doc 3.3.4-2 qt_2 2.3.1-b2 quilt 0.43-1 rcs 5.7-3 readline 5.1-5 rebase 2.4.3-1 regex 4.4-4 robots 2.0-4 rpm 4.1-2 rpm-build 4.1-1 rpm-doc 4.1-1 rsync 2.6.6-1 ruby 1.8.4-1 run 1.1.10-1 rxvt 20050409-3 rxvt-unicode-common 7.7-4 rxvt-unicode-X 7.7-4 s3270 3.3.4p7-1 sed 4.1.5-1 setsid 0.0-4 sh-utils 2.0.15-5 shared-mime-info 0.16-1 sharutils 4.5.3-1 shutdown 1.7-1 singular-base 3.0.1-1 singular-help 3.0.1-1 singular-icons 3.0.1-1 singular-share 3.0.1-1 singular-surf 3.0.0-2 smartmontools 5.36-1 speex 1.1.10-1 speex-devel 1.1.10-1 splint 3.1.1-1 squid 2.4.STABLE7-1 ssmtp 2.60.9-3 startup-notification 0.8-1 stow 1.3.3-1 stunnel 4.14-2 subversion 1.3.0-1 subversion-apache2 1.3.0-1 subversion-book 1.2.3-1 subversion-devel 1.3.0-1 subversion-perl 1.3.0-1 subversion-python 1.3.0-1 subversion-ruby 1.3.0-1 suite3270 3.3.4p7-1 sunrpc 4.0-3 SWI-Prolog 5.2.6-1 swig 1.3.29-2 syslog-ng 1.6.11-1 sysvinit 2.84-4 t1lib 5.1.0-1 t1lib-x11 5.1.0-1 tar 1.15.1-4 tcl3270 3.3.4p7-1 tcltk 20060202-1 tcm 2.20-1 tcp_wrappers 7.6-1 tcsh 6.14.00-5 termcap 20050421-1 terminfo 5.5_20060323-1 tetex 3.0.0-3 tetex-base 3.0.0-3 tetex-beta 20020911-1 tetex-bin 3.0.0-3 tetex-devel 3.0.0-3 tetex-doc 3.0.0-3 tetex-extra 3.0.0-3 tetex-tiny 3.0.0-3 tetex-x11 3.0.0-3 texi2html 1.76-1 texinfo 4.8-3 TeXmacs 1.0.6-1 texmf 20020911-1 texmf-base 20020911-1 texmf-doc 20020911-1 texmf-extra 20020911-1 texmf-tiny 20020911-1 textutils 2.0.21-2 tidy 041206-1 tiff 3.7.3-1 time 1.7-1 tin 1.8.2-1 tinyirc 1.1-1 tnef 1.3.4-1 transfig 3.2.4-2 ttcp 19980512-1 typespeed 0.4.4-2 tzcode 2005r-2 ucl 1.01-1 unison 2.10.2-4 unison2.10.2 2.10.2-6 unison2.12.0 2.12.0-4 unison2.13 2.13.16-1 unison2.17 2.17.1-1 unison2.9.1 2.9.1-3 unison2.9.20 2.9.20-3 units 1.77-1 unzip 5.50-5 upx 1.24-1 util-linux 2.12r-2 uw-imap 2002e-3 uw-imap-imapd 2002e-3 uw-imap-util 2002e-3 vim 7.0.035-1 vorbis-tools 1.1.1-5 w32api 3.7-1 w3m 0.5.1-1 wget 1.10.2-1 which 1.7-1 whois 4.7.11-1 WindowMaker 0.90.0-2 WordNet 2.1-1 wtf 0.0.4-6 X-start-menu-icons 1.0.4-1 X-startup-scripts 1.0.11-1 X11 2.2.2-1 x2x 1.30-2 x3270 3.3.4p7-1 Xaw3d 1.5D-5 xemacs 21.4.19-1 xemacs-emacs-common 21.4.19-1 xemacs-mule-sumo 2005-12-08-1 xemacs-sumo 2005-12-08-1 xemacs-tags 21.4.19-1 xerces-c 2.5.0-1 xerces-c-devel 2.5.0-1 xerces-c-doc 2.5.0-1 xfig 3.2.4-6 xfig-base 3.2.4-1 xfig-bin 3.2.4-3 xfig-doc 3.2.4-2 xfig-etc 3.2.4-4 xfig-lib 3.2.4-6 xfig-man 3.2.4-2 XFree86-base 4.3.0-11 XFree86-bin 4.3.0-21 XFree86-bin-icons 4.3.0-7 XFree86-doc 4.3.0-2 XFree86-etc 4.3.0-12 XFree86-f100 4.3.0-2 XFree86-fcyr 4.3.0-2 XFree86-fenc 4.3.0-2 XFree86-fnts 4.3.0-2 XFree86-fscl 4.3.0-2 XFree86-fsrv 4.3.0-9 XFree86-html 4.3.0-10 XFree86-jdoc 4.3.0-2 XFree86-lib 4.3.0-3 XFree86-lib-compat 4.3.0-2 XFree86-man 4.3.0-10 XFree86-nest 4.3.0-8 XFree86-prog 4.3.0-21 XFree86-prt 4.3.0-6 XFree86-ps 4.3.0-2 XFree86-startup-scripts 4.3.0-1 XFree86-vfb 4.3.0-8 XFree86-xserv 4.3.0-68 XFree86-xwinclip 4.3.0-3 xgraph 12.1-1 xinetd 2.3.9-1 XmHTML 1.1.7-1 xmlto 0.0.18-1 xmon 1.5.6-1 xorg-x11-base 6.8.99.901-1 xorg-x11-bin 6.8.99.901-1 xorg-x11-bin-dlls 6.8.99.901-1 xorg-x11-bin-lndir 6.8.99.901-1 xorg-x11-devel 6.8.99.901-1 xorg-x11-etc 6.8.99.901-1 xorg-x11-f100 6.8.99.901-1 xorg-x11-fcyr 6.8.99.901-1 xorg-x11-fenc 6.8.99.901-1 xorg-x11-fnts 6.8.99.901-1 xorg-x11-fscl 6.8.99.901-1 xorg-x11-fsrv 6.8.99.901-1 xorg-x11-libs-data 6.8.99.901-1 xorg-x11-man-pages 6.8.99.901-1 xorg-x11-man-pages-html 6.8.99.901-1 xorg-x11-nest 6.8.99.901-1 xorg-x11-vfb 6.8.99.901-1 xorg-x11-xwin 6.8.99.901-1 xorg-x11-xwin-gl 6.8.99.901-1 xpdf 3.01-2 xpm-nox 4.2.0-5 xsri 2.1.0-1 xterm 202-1 xwinclip 1.2.0-1 xwinwm 0.0.5-1 zip 2.3-6 zlib 1.2.3-1 zsh 4.2.6-1 Use -h to see help about each section -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ihok@hotmail.com Fri Jul 14 00:17:00 2006 From: ihok@hotmail.com (Jack Tanner) Date: Fri, 14 Jul 2006 00:17:00 -0000 Subject: How to start Unison for GUI? In-Reply-To: <1355.08758617124$1152793447@news.gmane.org> References: <44A33290.9080504@cygwin.com> <1355.08758617124$1152793447@news.gmane.org> Message-ID: siegfried wrote: > The man page for Unison says there is a GUI. I cannot find such a GUI in my > list of GUI programs in my menu for Cygwin-X. Is there something wrong with > my installation? The Unison GUI has not been ported to Cygwin. Try the Windows GUI that's downloadable directly from Unison's site (and which won't understand Cygwin paths), or use Unison's command-line interface. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From conoro@yahoo.com Fri Jul 14 09:19:00 2006 From: conoro@yahoo.com (Conor O'Neill) Date: Fri, 14 Jul 2006 09:19:00 -0000 Subject: XWin crash using XDMCP to Fedora Core 5 as root user Message-ID: <20060714091918.54044.qmail@web50608.mail.yahoo.com> I've encountered a very strange crash since upgrading my linux box to FC5. If I connect from my WinXP box using the following command line: xwin -once -query 192.168.0.7 and login as root, then XWin crashes as Gnome starts up (just before displaying the actual desktop) but if I login as any other user, it works fine! Text dumped to bash console on crash is: winLoadCursor - Windows requires 32x32 cursor but X requires 39x26 winProcQueryTree - Clipboard is not enabled, returning. winLoadCursor - Windows requires 32x32 cursor but X requires 39x26 4 [sig] xwin 10540 C:\cygwin\usr\X11R6\bin\xwin.exe: *** fatal error - C:\ cygwin\usr\X11R6\bin\xwin.exe: *** called with threadlist_ix -1 Hangup Anyone else seen this? I have never seen this on any RedHat or Fedora version prior to this. Conor p.s. yeah, I know it's very naughty to have XDMCP for root enabled. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Bengt-Arne.Fjellner@ltu.se Fri Jul 14 13:48:00 2006 From: Bengt-Arne.Fjellner@ltu.se (Bengt-Arne Fjellner) Date: Fri, 14 Jul 2006 13:48:00 -0000 Subject: XWin eats cpu after upgrade Message-ID: <1945.130.240.136.130.1152884863.squirrel@pinus.tt.luth.se> Upgraded XWin and then XWin starts eating lots of cpu even when idle. Happens only on one computer so far Downgrading from 6.8.99.901-4 to 6.8.2.0-4 and everything works again The computer where it happens is a dell P3 850MHz in a docking station Works ok on a P4 3GHz stationary Any ideas or instructions for strace or such? When running the new version system+XWin eats about 80% of the CPU cygcheck -svr is attached :) -- Bengt-Arne Fjellner -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: cygcheck.out URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From quetschke@scytek.de Fri Jul 14 14:23:00 2006 From: quetschke@scytek.de (Volker Quetschke) Date: Fri, 14 Jul 2006 14:23:00 -0000 Subject: Missing announcement for xorg-*-6.8.99.901-1 packages? Message-ID: <44B7A8E3.8030400@scytek.de> I just saw that setup wants to upgrade a lot of xorg packages. Did my mail program silently eat that announcement mail or was it just not send? Volker -- PGP/GPG key (ID: 0x9F8A785D) available from wwwkeys.de.pgp.net key-fingerprint 550D F17E B082 A3E9 F913 9E53 3D35 C9BA 9F8A 785D -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 254 bytes Desc: OpenPGP digital signature URL: From alain@knaff.lu Fri Jul 14 15:23:00 2006 From: alain@knaff.lu (Alain Knaff) Date: Fri, 14 Jul 2006 15:23:00 -0000 Subject: Cross-compiling instructions at http://x.cygwin.com/docs/cg/prog-build-cross.html obsolete? Message-ID: <44B7B66F.7020901@knaff.lu> Hi, I'm trying to build a Cygwin cross compiler (i.e. a compiler that runs on Linux but generates binaries that run on Cygwin) For this, I tried to follow the instructions at http://x.cygwin.com/docs/cg/prog-build-cross.html However, these seem to be obsolete. Indeed, on my Fedora Core 5, I get the following error when attempting to configure gcc: *** This configuration is not supported in the following subdirectories: target-libffi target-boehm-gc target-zlib target-libjava target-libf2c zlib fastjar target-libobjc (Any other directories should still work fine.) Copying no to /home/aknaff/cygwin/i686-pc-cygwin/sys-include /tmp/cNf677/cNf677.tgt: line 821: cd: no: No such file or directory Created "Makefile" in /home/aknaff/cygwin/src/gcc-3.3.1/build /tmp/ccvcwlyc.s: Assembler messages: /tmp/ccvcwlyc.s:5: Warning: .type pseudo-op used outside of .def/.endef ignored. /tmp/ccvcwlyc.s:5: Error: junk at end of line, first unrecognized character is `m' /tmp/ccvcwlyc.s:18: Warning: .size pseudo-op used outside of .def/.endef ignored. /tmp/ccvcwlyc.s:18: Error: junk at end of line, first unrecognized character is `m' /tmp/ccvcwlyc.s:20: Error: junk at end of line, first unrecognized character is `-' *** The command 'gcc -o conftest -O2 conftest.c' failed. *** You must set the environment variable CC to a working compiler. Is there any more up-to-date version of these instructions online? Or, even better, some pre-made RPMs of a cygwin crosscompiler? Thanks, Alain -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ihok@hotmail.com Fri Jul 14 15:40:00 2006 From: ihok@hotmail.com (Jack Tanner) Date: Fri, 14 Jul 2006 15:40:00 -0000 Subject: Missing announcement for xorg-*-6.8.99.901-1 packages? In-Reply-To: <44B7A8E3.8030400@scytek.de> References: <44B7A8E3.8030400@scytek.de> Message-ID: Volker Quetschke wrote: > I just saw that setup wants to upgrade a lot of xorg packages. > > Did my mail program silently eat that announcement mail or was > it just not send? I imagine Corinna pushed the packages but doesn't have time to 'announce' them. We're in-between maintainers. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ihok@hotmail.com Fri Jul 14 15:59:00 2006 From: ihok@hotmail.com (Jack Tanner) Date: Fri, 14 Jul 2006 15:59:00 -0000 Subject: XWin eats cpu after upgrade In-Reply-To: <1945.130.240.136.130.1152884863.squirrel@pinus.tt.luth.se> References: <1945.130.240.136.130.1152884863.squirrel@pinus.tt.luth.se> Message-ID: Please confirm if 6.8.99.901-4 eats CPU after you reboot after upgrading, how you invoked Xwin, and what you do when it begins to eat CPU. Bengt-Arne Fjellner wrote: > Upgraded XWin and then XWin starts eating lots of cpu even when idle. > Happens only on one computer so far > Downgrading from 6.8.99.901-4 to 6.8.2.0-4 and everything works again > The computer where it happens is a dell P3 850MHz in a docking station > Works ok on a P4 3GHz stationary > Any ideas or instructions for strace or such? > > When running the new version system+XWin eats about 80% of the CPU > > cygcheck -svr is attached :) > > > > > ------------------------------------------------------------------------ > > > Cygwin Configuration Diagnostics > Current System Time: Fri Jul 14 15:37:11 2006 > > Windows XP Professional Ver 5.1 Build 2600 Service Pack 2 > > Path: C:\cygwin\home\Administrat??r\bin > C:\cygwin\usr\local\bin > C:\cygwin\bin > C:\cygwin\bin > C:\cygwin\usr\X11R6\bin > c:\program\imagemagick-6.0.7-q16 > c:\Program\INDIGO~1\perl\bin > c:\WINDOWS\system32 > c:\WINDOWS > c:\WINDOWS\System32\Wbem > c:\matlab6p5\bin\win32 > c:\Program\Microsoft SQL Server\80\Tools\Binn\ > %ITAPaging% > c:\mcr\v70\runtime\win32 > c:\Program\ATI Technologies\ATI Control Panel > c:\Program\VisualStudio\Common\Tools\WinNT > c:\Program\VisualStudio\Common\MSDev98\Bin > c:\Program\VisualStudio\Common\Tools > c:\Program\VisualStudio\VC98\bin > c:\imagmagi > > Output from C:\cygwin\bin\id.exe (nontsec) > UID: 500(Administrat??r) GID: 513(Ingen) > 0(root) 513(Ingen) > 544(Administrat??rer) 552(Ansvariga f??r replikering) > 551(Ansvariga f??r s??kerhetskopiering) 545(Anv??ndare) > 547(Privilegierade anv??ndare) > > Output from C:\cygwin\bin\id.exe (ntsec) > UID: 500(Administrat??r) GID: 513(Ingen) > 0(root) 513(Ingen) > 544(Administrat??rer) 552(Ansvariga f??r replikering) > 551(Ansvariga f??r s??kerhetskopiering) 545(Anv??ndare) > 547(Privilegierade anv??ndare) > > SysDir: C:\WINDOWS\system32 > WinDir: C:\WINDOWS > > USER = 'Administrat??r' > PWD = '/tmp' > CYGWIN = 'server' > HOME = '/home/Administrat??r' > MAKE_MODE = 'unix' > > HOMEPATH = '\Documents and Settings\Administrat??r' > MANPATH = '/usr/local/man:/usr/man:/usr/share/man:/usr/autotool/devel/man::/usr/ssl/man:/usr/X11R6/man' > APPDATA = 'C:\Documents and Settings\Administrat??r\Application Data' > HOSTNAME = 'baf-barbar' > TERM = 'xterm' > PROCESSOR_IDENTIFIER = 'x86 Family 6 Model 8 Stepping 6, GenuineIntel' > WINDIR = 'C:\WINDOWS' > WINDOWID = '7143568' > OLDPWD = '/home/Administrat??r' > USERDOMAIN = 'BAF-BARBAR' > OS = 'Windows_NT' > ALLUSERSPROFILE = 'C:\Documents and Settings\All Users' > !:: = '::\' > TEMP = '/cygdrive/c/DOCUME~1/ADMINI~1/LOKALA~1/Temp' > COMMONPROGRAMFILES = 'C:\Program\Delade filer' > LIB = 'C:\Program\VisualStudio\VC98\mfc\lib;C:\Program\VisualStudio\VC98\lib' > USERNAME = 'Administrat??r' > PAGER = 'less -R' > PROCESSOR_LEVEL = '6' > FP_NO_HOST_CHECK = 'NO' > SYSTEMDRIVE = 'C:' > USERPROFILE = 'C:\Documents and Settings\Administrat??r' > PS1 = '\[\033]0;\h \w\007 > \033[32m\]\u@\h \[\033[33m\w\033[0m\] > $ ' > LOGONSERVER = '\\BAF-BARBAR' > PROCESSOR_ARCHITECTURE = 'x86' > MAGICK_HOME = 'C:\imagmagi' > HISTCONTROL = 'ignoredups' > LESSCHARSET = 'latin1' > SHLVL = '1' > COLORFGBG = '0;default;15' > PATHEXT = '.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH' > HOMEDRIVE = 'C:' > COMSPEC = 'C:\WINDOWS\system32\cmd.exe' > TMP = '/cygdrive/c/DOCUME~1/ADMINI~1/LOKALA~1/Temp' > SYSTEMROOT = 'C:\WINDOWS' > PRINTER = '\\lunte\Data' > CVS_RSH = '/bin/ssh' > PROCESSOR_REVISION = '0806' > MSDEVDIR = 'C:\Program\VisualStudio\Common\MSDev98' > PKG_CONFIG_PATH = '/usr/X11R6/lib/pkgconfig' > INFOPATH = '/usr/local/info:/usr/info:/usr/share/info:/usr/autotool/devel/info:/usr/autotool/stable/info:' > PROGRAMFILES = 'C:\Program' > DISPLAY = ':0' > NUMBER_OF_PROCESSORS = '1' > INCLUDE = 'C:\Program\VisualStudio\VC98\atl\include;C:\Program\VisualStudio\VC98\mfc\include;C:\Program\VisualStudio\VC98\include' > SESSIONNAME = 'Console' > COMPUTERNAME = 'BAF-BARBAR' > COLORTERM = 'rxvt-xpm' > _ = '/usr/bin/cygcheck' > POSIXLY_CORRECT = '1' > > HKEY_CURRENT_USER\Software\Cygnus Solutions > HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin > HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2 > HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options > HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions > HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin > HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2 > (default) = '/cygdrive' > cygdrive flags = 0x00000022 > HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/ > (default) = 'C:\cygwin' > flags = 0x0000000a > HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/bin > (default) = 'C:\cygwin/bin' > flags = 0x0000000a > HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/lib > (default) = 'C:\cygwin/lib' > flags = 0x0000000a > HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/X11R6/lib/X11/fonts > (default) = 'C:\cygwin\usr\X11R6\lib\X11\fonts' > flags = 0x0000000a > HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Program Options > > a: fd N/A N/A > c: hd NTFS 38146Mb 58% CP CS UN PA FC > d: cd N/A N/A > > C:\cygwin / system binmode > C:\cygwin/bin /usr/bin system binmode > C:\cygwin/lib /usr/lib system binmode > C:\cygwin\usr\X11R6\lib\X11\fonts /usr/X11R6/lib/X11/fonts system binmode > . /cygdrive system binmode,cygdrive > > Found: C:\cygwin\bin\awk.exe > Found: C:\cygwin\bin\bash.exe > Found: C:\cygwin\bin\cat.exe > Found: C:\cygwin\bin\cp.exe > Found: C:\cygwin\bin\cpp.exe > Not Found: crontab > Found: C:\cygwin\bin\find.exe > Found: C:\cygwin\bin\gcc.exe > Found: C:\cygwin\bin\gdb.exe > Found: C:\cygwin\bin\grep.exe > Found: C:\cygwin\bin\kill.exe > Found: C:\cygwin\bin\ld.exe > Found: C:\cygwin\bin\ls.exe > Found: C:\cygwin\bin\make.exe > Found: C:\cygwin\bin\mv.exe > Not Found: patch > Found: C:\cygwin\bin\perl.exe > Found: c:\Program\INDIGO~1\perl\bin\perl.exe > Warning: C:\cygwin\bin\perl.exe hides c:\Program\INDIGO~1\perl\bin\perl.exe > Found: C:\cygwin\bin\rm.exe > Found: C:\cygwin\bin\sed.exe > Found: C:\cygwin\bin\ssh.exe > Found: C:\cygwin\bin\sh.exe > Found: C:\cygwin\bin\tar.exe > Found: C:\cygwin\bin\test.exe > Not Found: vi > Not Found: vim > > 896k 2006/07/02 C:\cygwin\usr\local\bin\cyguninameslist-0.dll - os=4.0 img=1.0 sys=4.0 > "cyguninameslist-0.dll" v0.0 ts=2005/9/28 20:28 > 889k 2006/07/02 C:\cygwin\usr\local\bin\cyguninameslist-fr-0.dll - os=4.0 img=1.0 sys=4.0 > "cyguninameslist-fr-0.dll" v0.0 ts=2005/9/28 20:28 > 56k 2005/07/09 C:\cygwin\bin\cygbz2-1.dll - os=4.0 img=1.0 sys=4.0 > "cygbz2-1.dll" v0.0 ts=2005/7/9 7:09 > 7k 2005/11/20 C:\cygwin\bin\cygcharset-1.dll - os=4.0 img=1.0 sys=4.0 > "cygcharset-1.dll" v0.0 ts=2005/11/20 3:24 > 7k 2003/10/19 C:\cygwin\bin\cygcrypt-0.dll - os=4.0 img=1.0 sys=4.0 > "cygcrypt-0.dll" v0.0 ts=2003/10/19 9:57 > 1108k 2006/06/01 C:\cygwin\bin\cygcrypto-0.9.7.dll - os=4.0 img=1.0 sys=4.0 > "cygcrypto-0.9.7.dll" v0.0 ts=2006/6/1 17:50 > 1050k 2006/06/01 C:\cygwin\bin\cygcrypto-0.9.8.dll - os=4.0 img=1.0 sys=4.0 > "cygcrypto-0.9.8.dll" v0.0 ts=2006/6/1 18:08 > 645k 2003/04/11 C:\cygwin\bin\cygcrypto.dll - os=4.0 img=1.0 sys=4.0 > "cygcrypto.dll" v0.0 ts=2003/4/11 12:37 > 22k 2004/02/10 C:\cygwin\bin\cygcygipc-2.dll - os=4.0 img=1.0 sys=4.0 > "cygcygipc-2.dll" v0.0 ts=2004/2/10 3:48 > 380k 2002/07/24 C:\cygwin\bin\cygdb-3.1.dll - os=4.0 img=1.0 sys=4.0 > "cygdb-3.1.dll" v0.0 ts=2002/7/24 18:24 > 831k 2003/09/20 C:\cygwin\bin\cygdb-4.1.dll - os=4.0 img=1.0 sys=4.0 > "cygdb-4.1.dll" v0.0 ts=2003/9/20 23:51 > 895k 2004/04/28 C:\cygwin\bin\cygdb-4.2.dll - os=4.0 img=1.0 sys=4.0 > "cygdb-4.2.dll" v0.0 ts=2004/4/27 17:31 > 965k 2005/05/14 C:\cygwin\bin\cygdb-4.3.dll - os=4.0 img=1.0 sys=4.0 > "cygdb-4.3.dll" v0.0 ts=2005/5/14 14:37 > 487k 2002/07/24 C:\cygwin\bin\cygdb_cxx-3.1.dll - os=4.0 img=1.0 sys=4.0 > "cygdb_cxx-3.1.dll" v0.0 ts=2002/7/24 18:25 > 1080k 2003/09/20 C:\cygwin\bin\cygdb_cxx-4.1.dll - os=4.0 img=1.0 sys=4.0 > "cygdb_cxx-4.1.dll" v0.0 ts=2003/9/20 23:53 > 1156k 2004/04/28 C:\cygwin\bin\cygdb_cxx-4.2.dll - os=4.0 img=1.0 sys=4.0 > "cygdb_cxx-4.2.dll" v0.0 ts=2004/4/27 17:35 > 1240k 2005/05/14 C:\cygwin\bin\cygdb_cxx-4.3.dll - os=4.0 img=1.0 sys=4.0 > "cygdb_cxx-4.3.dll" v0.0 ts=2005/5/14 14:41 > 9k 2004/10/24 C:\cygwin\bin\cygdlloader-6.dll - os=4.0 img=1.0 sys=4.0 > "cygdlloader-6.dll" v0.0 ts=2004/10/24 9:59 > 174k 2004/10/14 C:\cygwin\bin\cygexpat-0.dll - os=4.0 img=1.0 sys=4.0 > "cygexpat-0.dll" v0.0 ts=2004/10/14 10:34 > 129k 2004/03/11 C:\cygwin\bin\cygfontconfig-1.dll - os=4.0 img=1.0 sys=4.0 > "cygfontconfig-1.dll" v0.0 ts=2004/3/11 1:12 > 40k 2006/03/24 C:\cygwin\bin\cygform-8.dll - os=4.0 img=1.0 sys=4.0 > "cygform-8.dll" v0.0 ts=2006/3/24 8:16 > 45k 2001/04/25 C:\cygwin\bin\cygform5.dll - os=4.0 img=1.0 sys=4.0 > "cygform5.dll" v0.0 ts=2001/4/25 7:28 > 35k 2002/01/09 C:\cygwin\bin\cygform6.dll - os=4.0 img=1.0 sys=4.0 > "cygform6.dll" v0.0 ts=2002/1/9 7:03 > 48k 2003/08/09 C:\cygwin\bin\cygform7.dll - os=4.0 img=1.0 sys=4.0 > "cygform7.dll" v0.0 ts=2003/8/9 11:25 > 375k 2005/09/06 C:\cygwin\bin\cygfreetype-6.dll - os=4.0 img=1.0 sys=4.0 > "cygfreetype-6.dll" v0.0 ts=2005/9/7 0:51 > 28k 2003/07/20 C:\cygwin\bin\cyggdbm-3.dll - os=4.0 img=1.0 sys=4.0 > "cyggdbm-3.dll" v0.0 ts=2003/7/20 9:58 > 30k 2003/08/11 C:\cygwin\bin\cyggdbm-4.dll - os=4.0 img=1.0 sys=4.0 > "cyggdbm-4.dll" v0.0 ts=2003/8/11 4:12 > 19k 2003/03/22 C:\cygwin\bin\cyggdbm.dll - os=4.0 img=1.0 sys=4.0 > "cyggdbm.dll" v0.0 ts=2002/2/20 4:05 > 15k 2003/07/20 C:\cygwin\bin\cyggdbm_compat-3.dll - os=4.0 img=1.0 sys=4.0 > "cyggdbm_compat-3.dll" v0.0 ts=2003/7/20 10:00 > 15k 2003/08/11 C:\cygwin\bin\cyggdbm_compat-4.dll - os=4.0 img=1.0 sys=4.0 > "cyggdbm_compat-4.dll" v0.0 ts=2003/8/11 4:13 > 78k 2005/11/20 C:\cygwin\bin\cyggettextlib-0-14-5.dll - os=4.0 img=1.0 sys=4.0 > "cyggettextlib-0-14-5.dll" v0.0 ts=2005/11/20 3:11 > 13k 2005/11/20 C:\cygwin\bin\cyggettextpo-0.dll - os=4.0 img=1.0 sys=4.0 > "cyggettextpo-0.dll" v0.0 ts=2005/11/20 3:11 > 163k 2005/11/20 C:\cygwin\bin\cyggettextsrc-0-14-5.dll - os=4.0 img=1.0 sys=4.0 > "cyggettextsrc-0-14-5.dll" v0.0 ts=2005/11/20 3:11 > 17k 2001/06/28 C:\cygwin\bin\cyghistory4.dll - os=4.0 img=1.0 sys=4.0 > "cyghistory4.dll" v0.0 ts=2001/1/7 5:34 > 29k 2003/08/10 C:\cygwin\bin\cyghistory5.dll - os=4.0 img=1.0 sys=4.0 > "cyghistory5.dll" v0.0 ts=2003/8/11 1:16 > 24k 2006/03/25 C:\cygwin\bin\cyghistory6.dll - os=4.0 img=1.0 sys=4.0 > "cyghistory6.dll" v0.0 ts=2006/3/25 15:05 > 947k 2005/11/20 C:\cygwin\bin\cygiconv-2.dll - os=4.0 img=1.0 sys=4.0 > "cygiconv-2.dll" v0.0 ts=2005/11/20 3:24 > 22k 2001/12/13 C:\cygwin\bin\cygintl-1.dll - os=4.0 img=1.0 sys=4.0 > "cygintl-1.dll" v0.0 ts=2001/12/13 10:28 > 37k 2003/08/10 C:\cygwin\bin\cygintl-2.dll - os=4.0 img=1.0 sys=4.0 > "cygintl-2.dll" v0.0 ts=2003/8/10 23:50 > 31k 2005/11/20 C:\cygwin\bin\cygintl-3.dll - os=4.0 img=1.0 sys=4.0 > "cygintl-3.dll" v0.0 ts=2005/11/20 3:04 > 21k 2001/06/20 C:\cygwin\bin\cygintl.dll - os=4.0 img=1.0 sys=4.0 > "cygintl.dll" v0.0 ts=2001/6/20 19:09 > 132k 2003/08/11 C:\cygwin\bin\cygjpeg-62.dll - os=4.0 img=1.0 sys=4.0 > "cygjpeg-62.dll" v0.0 ts=2003/8/11 2:37 > 119k 2002/02/09 C:\cygwin\bin\cygjpeg6b.dll - os=4.0 img=1.0 sys=4.0 > "cygjpeg6b.dll" v0.0 ts=2002/2/9 6:19 > 23k 2006/04/19 C:\cygwin\bin\cygltdl-3.dll - os=4.0 img=1.0 sys=4.0 > "cygltdl-3.dll" v0.0 ts=2006/4/19 8:19 > 26k 2004/10/24 C:\cygwin\bin\cygltdl-6.dll - os=4.0 img=1.0 sys=4.0 > "cygltdl-6.dll" v0.0 ts=2004/10/24 9:59 > 48k 2005/11/19 C:\cygwin\bin\cygmagic-1.dll - os=4.0 img=1.0 sys=4.0 > "cygmagic-1.dll" v0.0 ts=2005/11/19 12:22 > 21k 2006/03/24 C:\cygwin\bin\cygmenu-8.dll - os=4.0 img=1.0 sys=4.0 > "cygmenu-8.dll" v0.0 ts=2006/3/24 8:16 > 26k 2001/04/25 C:\cygwin\bin\cygmenu5.dll - os=4.0 img=1.0 sys=4.0 > "cygmenu5.dll" v0.0 ts=2001/4/25 7:27 > 20k 2002/01/09 C:\cygwin\bin\cygmenu6.dll - os=4.0 img=1.0 sys=4.0 > "cygmenu6.dll" v0.0 ts=2002/1/9 7:03 > 29k 2003/08/09 C:\cygwin\bin\cygmenu7.dll - os=4.0 img=1.0 sys=4.0 > "cygmenu7.dll" v0.0 ts=2003/8/9 11:25 > 21k 2004/10/22 C:\cygwin\bin\cygminires.dll - os=4.0 img=1.0 sys=4.0 > "cygminires.dll" v0.0 ts=2004/10/22 22:28 > 67k 2006/03/24 C:\cygwin\bin\cygncurses++-8.dll - os=4.0 img=1.0 sys=4.0 > "cygncurses++-8.dll" v0.0 ts=2006/3/24 8:17 > 156k 2001/04/25 C:\cygwin\bin\cygncurses++5.dll - os=4.0 img=1.0 sys=4.0 > "cygncurses++5.dll" v0.0 ts=2001/4/25 7:29 > 175k 2002/01/09 C:\cygwin\bin\cygncurses++6.dll - os=4.0 img=1.0 sys=4.0 > "cygncurses++6.dll" v0.0 ts=2002/1/9 7:03 > 227k 2006/03/24 C:\cygwin\bin\cygncurses-8.dll - os=4.0 img=1.0 sys=4.0 > "cygncurses-8.dll" v0.0 ts=2006/3/24 5:51 > 226k 2001/04/25 C:\cygwin\bin\cygncurses5.dll - os=4.0 img=1.0 sys=4.0 > "cygncurses5.dll" v0.0 ts=2001/4/25 7:17 > 202k 2002/01/09 C:\cygwin\bin\cygncurses6.dll - os=4.0 img=1.0 sys=4.0 > "cygncurses6.dll" v0.0 ts=2002/1/9 7:03 > 224k 2003/08/09 C:\cygwin\bin\cygncurses7.dll - os=4.0 img=1.0 sys=4.0 > "cygncurses7.dll" v0.0 ts=2003/8/9 11:24 > 12k 2006/03/24 C:\cygwin\bin\cygpanel-8.dll - os=4.0 img=1.0 sys=4.0 > "cygpanel-8.dll" v0.0 ts=2006/3/24 8:16 > 15k 2001/04/25 C:\cygwin\bin\cygpanel5.dll - os=4.0 img=1.0 sys=4.0 > "cygpanel5.dll" v0.0 ts=2001/4/25 7:27 > 12k 2002/01/09 C:\cygwin\bin\cygpanel6.dll - os=4.0 img=1.0 sys=4.0 > "cygpanel6.dll" v0.0 ts=2002/1/9 7:03 > 19k 2003/08/09 C:\cygwin\bin\cygpanel7.dll - os=4.0 img=1.0 sys=4.0 > "cygpanel7.dll" v0.0 ts=2003/8/9 11:24 > 176k 2005/09/06 C:\cygwin\bin\cygpcre-0.dll - os=4.0 img=1.0 sys=4.0 > "cygpcre-0.dll" v0.0 ts=2005/9/6 22:49 > 299k 2005/09/06 C:\cygwin\bin\cygpcrecpp-0.dll - os=4.0 img=1.0 sys=4.0 > "cygpcrecpp-0.dll" v0.0 ts=2005/9/6 23:26 > 6k 2005/09/06 C:\cygwin\bin\cygpcreposix-0.dll - os=4.0 img=1.0 sys=4.0 > "cygpcreposix-0.dll" v0.0 ts=2005/9/6 23:26 > 1249k 2005/12/30 C:\cygwin\bin\cygperl5_8.dll - os=4.0 img=1.0 sys=4.0 > "cygperl5_8.dll" v0.0 ts=2005/12/30 2:48 > 230k 2005/07/11 C:\cygwin\bin\cygpng12.dll - os=4.0 img=1.0 sys=4.0 > "cygpng12.dll" v0.0 ts=2005/7/12 1:50 > 22k 2002/06/09 C:\cygwin\bin\cygpopt-0.dll - os=4.0 img=1.0 sys=4.0 > "cygpopt-0.dll" v0.0 ts=2002/6/9 7:45 > 108k 2001/06/28 C:\cygwin\bin\cygreadline4.dll - os=4.0 img=1.0 sys=4.0 > "cygreadline4.dll" v0.0 ts=2001/1/7 5:34 > 148k 2003/08/10 C:\cygwin\bin\cygreadline5.dll - os=4.0 img=1.0 sys=4.0 > "cygreadline5.dll" v0.0 ts=2003/8/11 1:16 > 152k 2006/03/25 C:\cygwin\bin\cygreadline6.dll - os=4.0 img=1.0 sys=4.0 > "cygreadline6.dll" v0.0 ts=2006/3/25 15:05 > 230k 2006/06/01 C:\cygwin\bin\cygssl-0.9.7.dll - os=4.0 img=1.0 sys=4.0 > "cygssl-0.9.7.dll" v0.0 ts=2006/6/1 17:50 > 214k 2006/06/01 C:\cygwin\bin\cygssl-0.9.8.dll - os=4.0 img=1.0 sys=4.0 > "cygssl-0.9.8.dll" v0.0 ts=2006/6/1 18:08 > 165k 2003/04/11 C:\cygwin\bin\cygssl.dll - os=4.0 img=1.0 sys=4.0 > "cygssl.dll" v0.0 ts=2003/4/11 12:37 > 281k 2003/02/24 C:\cygwin\bin\cygtiff3.dll - os=4.0 img=1.0 sys=4.0 > "cygtiff3.dll" v0.0 ts=2003/2/24 5:58 > 282k 2003/08/11 C:\cygwin\bin\cygtiff4.dll - os=4.0 img=1.0 sys=4.0 > "cygtiff4.dll" v0.0 ts=2003/8/11 4:32 > 27k 2005/10/23 C:\cygwin\bin\cygungif-4.dll - os=4.0 img=1.0 sys=4.0 > "cygungif-4.dll" v0.0 ts=2005/10/23 22:11 > 1430k 2005/11/18 C:\cygwin\bin\cygxml2-2.dll - os=4.0 img=1.0 sys=4.0 > "cygxml2-2.dll" v0.0 ts=2005/11/18 18:48 > 65k 2005/08/23 C:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0 > "cygz.dll" v0.0 ts=2005/8/23 4:03 > 1831k 2006/07/01 C:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0 > "cygwin1.dll" v0.0 ts=2006/7/1 8:22 > Cygwin DLL version info: > DLL version: 1.5.20 > DLL epoch: 19 > DLL bad signal mask: 19005 > DLL old termios: 5 > DLL malloc env: 28 > API major: 0 > API minor: 156 > Shared data: 4 > DLL identifier: cygwin1 > Mount registry: 2 > Cygnus registry name: Cygnus Solutions > Cygwin registry name: Cygwin > Program options name: Program Options > Cygwin mount registry name: mounts v2 > Cygdrive flags: cygdrive flags > Cygdrive prefix: cygdrive prefix > Cygdrive default prefix: > Build date: Sat Jul 1 02:22:36 EDT 2006 > Shared id: cygwin1S4 > > 26k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygDtPrint-1.dll - os=4.0 img=1.0 sys=4.0 > "cygDtPrint-1.dll" v0.0 ts=2005/9/22 1:31 > 167k 2003/10/17 C:\cygwin\usr\X11R6\bin\cygfontconfig-1.dll - os=4.0 img=1.0 sys=4.0 > "cygfontconfig-1.dll" v0.0 ts=2003/10/17 6:11 > 20k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygfontenc-1.dll - os=4.0 img=1.0 sys=4.0 > "cygfontenc-1.dll" v0.0 ts=2005/10/26 21:14 > 282k 2003/10/28 C:\cygwin\usr\X11R6\bin\cygfreetype-9.dll - os=4.0 img=1.0 sys=4.0 > "cygfreetype-9.dll" v0.0 ts=2003/10/18 8:44 > 34k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygFS-6.dll - os=4.0 img=1.0 sys=4.0 > "cygFS-6.dll" v0.0 ts=2005/10/26 19:52 > 357k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygGL-1.dll - os=4.0 img=1.0 sys=4.0 > "cygGL-1.dll" v0.0 ts=2005/10/26 20:30 > 441k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygGLU-1.dll - os=4.0 img=1.0 sys=4.0 > "cygGLU-1.dll" v0.0 ts=2005/10/26 20:48 > 74k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygICE-6.dll - os=4.0 img=1.0 sys=4.0 > "cygICE-6.dll" v0.0 ts=2005/10/26 19:11 > 74k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygMrm-2.dll - os=4.0 img=1.0 sys=4.0 > "cygMrm-2.dll" v0.0 ts=2005/9/22 1:30 > 8k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygoldX-6.dll - os=4.0 img=1.0 sys=4.0 > "cygoldX-6.dll" v0.0 ts=2005/10/26 19:09 > 1662k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygOSMesa-4.dll - os=4.0 img=1.0 sys=4.0 > "cygOSMesa-4.dll" v0.0 ts=2005/10/26 20:32 > 28k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygSM-6.dll - os=4.0 img=1.0 sys=4.0 > "cygSM-6.dll" v0.0 ts=2005/10/26 19:12 > 63k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygUil-2.dll - os=4.0 img=1.0 sys=4.0 > "cygUil-2.dll" v0.0 ts=2005/9/22 1:31 > 884k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygX11-6.dll - os=4.0 img=1.0 sys=4.0 > "cygX11-6.dll" v0.0 ts=2005/10/26 19:07 > 8k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXau-6.dll - os=4.0 img=1.0 sys=4.0 > "cygXau-6.dll" v0.0 ts=2005/10/26 18:31 > 250k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXaw-6.dll - os=4.0 img=1.0 sys=4.0 > "cygXaw-6.dll" v0.0 ts=2005/10/26 19:33 > 354k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXaw-7.dll - os=4.0 img=1.0 sys=4.0 > "cygXaw-7.dll" v0.0 ts=2005/10/26 19:39 > 360k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXaw-8.dll - os=4.0 img=1.0 sys=4.0 > "cygXaw-8.dll" v0.0 ts=2005/10/26 19:45 > 275k 2004/01/13 C:\cygwin\usr\X11R6\bin\cygXaw3d-7.dll - os=4.0 img=1.0 sys=4.0 > "cygXaw3d-7.dll" v0.0 ts=2004/1/13 23:17 > 7k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXcomposite-1.dll - os=4.0 img=1.0 sys=4.0 > "cygXcomposite-1.dll" v0.0 ts=2005/10/26 21:04 > 30k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXcursor-1.dll - os=4.0 img=1.0 sys=4.0 > "cygXcursor-1.dll" v0.0 ts=2005/10/26 21:03 > 8k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXdamage-1.dll - os=4.0 img=1.0 sys=4.0 > "cygXdamage-1.dll" v0.0 ts=2005/10/26 21:02 > 16k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXdmcp-6.dll - os=4.0 img=1.0 sys=4.0 > "cygXdmcp-6.dll" v0.0 ts=2005/10/26 18:34 > 7k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXevie-1.dll - os=4.0 img=1.0 sys=4.0 > "cygXevie-1.dll" v0.0 ts=2005/10/26 21:01 > 50k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXext-6.dll - os=4.0 img=1.0 sys=4.0 > "cygXext-6.dll" v0.0 ts=2005/10/26 19:14 > 15k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXfixes-3.dll - os=4.0 img=1.0 sys=4.0 > "cygXfixes-3.dll" v0.0 ts=2005/10/26 21:02 > 56k 2004/03/11 C:\cygwin\usr\X11R6\bin\cygXft-1.dll - os=4.0 img=1.0 sys=4.0 > "cygXft-1.dll" v0.0 ts=2003/11/18 2:42 > 63k 2004/03/23 C:\cygwin\usr\X11R6\bin\cygXft-2.dll - os=4.0 img=1.0 sys=4.0 > "cygXft-2.dll" v0.0 ts=2004/3/23 23:20 > 26k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXi-6.dll - os=4.0 img=1.0 sys=4.0 > "cygXi-6.dll" v0.0 ts=2005/10/26 19:48 > 121k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxkbfile-1.dll - os=4.0 img=1.0 sys=4.0 > "cygxkbfile-1.dll" v0.0 ts=2005/10/26 19:54 > 11k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxkbui-1.dll - os=4.0 img=1.0 sys=4.0 > "cygxkbui-1.dll" v0.0 ts=2005/10/26 19:54 > 1185k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygXm-2.dll - os=4.0 img=1.0 sys=4.0 > "cygXm-2.dll" v0.0 ts=2005/9/22 1:27 > 74k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXmu-6.dll - os=4.0 img=1.0 sys=4.0 > "cygXmu-6.dll" v0.0 ts=2005/10/26 19:22 > 10k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXmuu-1.dll - os=4.0 img=1.0 sys=4.0 > "cygXmuu-1.dll" v0.0 ts=2005/10/26 19:23 > 26k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXp-6.dll - os=4.0 img=1.0 sys=4.0 > "cygXp-6.dll" v0.0 ts=2005/10/26 19:27 > 54k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXpm-4.dll - os=4.0 img=1.0 sys=4.0 > "cygXpm-4.dll" v0.0 ts=2005/10/26 19:26 > 10k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXrandr-2.dll - os=4.0 img=1.0 sys=4.0 > "cygXrandr-2.dll" v0.0 ts=2005/10/26 20:58 > 30k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXrender-1.dll - os=4.0 img=1.0 sys=4.0 > "cygXrender-1.dll" v0.0 ts=2005/10/26 20:52 > 7k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXRes-1.dll - os=4.0 img=1.0 sys=4.0 > "cygXRes-1.dll" v0.0 ts=2005/10/26 21:00 > 38k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxrx-6.dll - os=4.0 img=1.0 sys=4.0 > "cygxrx-6.dll" v0.0 ts=2005/10/26 22:13 > 24k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxrxnest-6.dll - os=4.0 img=1.0 sys=4.0 > "cygxrxnest-6.dll" v0.0 ts=2005/10/26 22:14 > 283k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXt-6.dll - os=4.0 img=1.0 sys=4.0 > "cygXt-6.dll" v0.0 ts=2005/10/26 19:19 > 27k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXTrap-6.dll - os=4.0 img=1.0 sys=4.0 > "cygXTrap-6.dll" v0.0 ts=2005/10/26 21:00 > 17k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXtst-6.dll - os=4.0 img=1.0 sys=4.0 > "cygXtst-6.dll" v0.0 ts=2005/10/26 19:49 > > Service : cygserver > Display name : CYGWIN cygserver > Current State : Running > Controls Accepted : Stop > Command : /usr/sbin/cygserver > stdin path : /dev/null > stdout path : /var/log/cygserver.log > stderr path : /var/log/cygserver.log > Process Type : Own Process > Startup : Automatic > Account : LocalSystem > > > Cygwin Package Information > Last downloaded files to: C:\cyginst > Last downloaded files from: ftp://cygwin.osuosl.org/pub/cygwin > > Package Version > _update-info-dir 00409-1 > a2ps 4.13-1 > alternatives 1.3.20a-2 > antiword 0.34-2 > ash 20040127-3 > autoconf 2.59-2 > autoconf-devel 2.59-2 > autoconf-stable 2.13-6 > autoconf2.1 2.13-1 > autoconf2.5 2.59-2 > automake 1.7.9-2 > automake-devel 1.9.2-2 > automake-stable 1.4p6-3 > automake1.4 1.4p6-3 > automake1.9 1.9.6-1 > base-files 3.7-1 > base-passwd 2.2-1 > bash 3.1-6 > binutils 20060709-1 > bzip2 1.0.3-1 > check 0.9.1-1 > coreutils 5.97-1 > crypt 1.1-1 > ctags 5.6-1 > cvs 1.11.17-1 > cygipc 2.03-2 > cygrunsrv 1.17-1 > cygutils 1.3.0-1 > cygwin 1.5.20-1 > cygwin-doc 1.4-3 > cygwin-x-doc 1.0.4-1 > diffutils 2.8.7-1 > editrights 1.01-1 > emacs 21.2-13 > emacs-X11 21.2-13 > expat 1.95.8-1 > file 4.16-1 > fileutils 4.1-3 > findutils 4.2.27-1 > fontconfig 2.2.2-1 > freetype2 2.1.9-1 > fvwm 2.4.7-3 > gawk 3.1.5-4 > gcc 3.4.4-1 > gcc-core 3.4.4-1 > gcc-g++ 3.4.4-1 > gcc-mingw 20040810-1 > gcc-mingw-core 20050522-1 > gcc-mingw-g++ 20050522-1 > gdb 20060706-2 > gdbm 1.8.3-7 > gettext 0.14.5-1 > grep 2.5.1a-2 > groff 1.18.1-2 > gzip 1.3.5-2 > indent 2.2.9-1 > inetutils 1.3.2-35 > keychain 2.5.3.1-1 > less 381-1 > lesstif 0.94.4-1 > libbz2_1 1.0.3-1 > libcharset1 1.9.2-2 > libdb3.1 3.1.17-2 > libdb4.1 4.1.25-1 > libdb4.2 4.2.52-1 > libdb4.3 4.3.28-1 > libfontconfig-devel 2.2.2-1 > libfontconfig1 2.2.2-1 > libfreetype2-devel 2.1.9-1 > libfreetype26 2.1.9-1 > libgdbm 1.8.0-5 > libgdbm-devel 1.8.3-7 > libgdbm3 1.8.3-3 > libgdbm4 1.8.3-7 > libgettextpo0 0.14.5-1 > libiconv 1.9.2-2 > libiconv2 1.9.2-2 > libintl 0.10.38-3 > libintl1 0.10.40-1 > libintl2 0.12.1-3 > libintl3 0.14.5-1 > libjpeg62 6b-11 > libjpeg6b 6b-8 > libltdl3 1.5.22-1 > libltdl6 1.9f_20041024-1 > libncurses-devel 5.5-2 > libncurses5 5.2-1 > libncurses6 5.2-8 > libncurses7 5.3-4 > libncurses8 5.5-2 > libpcre 4.1-2 > libpcre0 6.3-1 > libpng12 1.2.8-2 > libpopt0 1.6.4-4 > libreadline4 4.1-2 > libreadline5 4.3-5 > libreadline6 5.1-5 > libtiff3 3.6.0-2 > libtiff4 3.6.0-5 > libtool 1.5b-2 > libtool-devel 1.5.10-2 > libtool-stable 1.4.3-3 > libtool1.5 1.5.22-1 > libungif 4.1.4-1 > libungif4 4.1.4-1 > libXft 2.1.6-1 > libXft-devel 2.1.6-1 > libXft1 1.0.0-1 > libXft2 2.1.6-1 > libxml2 2.6.22-1 > libxml2-devel 2.6.22-1 > login 1.9-7 > m4 1.4.4-1 > make 3.81-1 > man 1.5p-1 > mingw-runtime 3.10-1 > minires 1.00-1 > mktemp 1.5-3 > ncurses 5.5-2 > openssh 4.3p2-3 > openssl 0.9.8b-1 > openssl-devel 0.9.8b-1 > openssl096 0.9.6j-1 > openssl097 0.9.7j-1 > pcre 6.3-1 > pcre-devel 6.3-1 > pcre-doc 6.3-1 > perl 5.8.7-5 > procps 3.2.6-1 > proftpd 1.2.10-1 > psutils 1.17-1 > readline 5.1-5 > run 1.1.10-1 > rxvt 20050409-3 > sed 4.1.5-1 > sh-utils 2.0.15-5 > smartmontools 5.36-1 > tar 1.15.1-4 > tcltk 20060202-1 > tcsh 6.14.00-5 > termcap 20050421-1 > terminfo 5.5_20060323-1 > texinfo 4.8-3 > textutils 2.0.21-2 > w32api 3.7-1 > wget 1.10.2-1 > which 1.7-1 > X-startup-scripts 1.0.11-1 > X11 2.2.2-1 > Xaw3d 1.5D-5 > XFree86-base 4.3.0-11 > XFree86-bin 4.3.0-21 > XFree86-etc 4.3.0-12 > XFree86-fenc 4.3.0-2 > XFree86-fnts 4.3.0-2 > XFree86-fscl 4.3.0-2 > XFree86-lib 4.3.0-3 > XFree86-lib-compat 4.3.0-2 > XFree86-man 4.3.0-10 > XFree86-prog 4.3.0-21 > XFree86-startup-scripts 4.3.0-1 > XFree86-xserv 4.3.0-68 > XFree86-xwinclip 4.3.0-3 > xorg-x11-base 6.8.99.901-1 > xorg-x11-bin 6.8.99.901-1 > xorg-x11-bin-dlls 6.8.99.901-1 > xorg-x11-bin-lndir 6.8.99.901-1 > xorg-x11-devel 6.8.99.901-1 > xorg-x11-etc 6.8.99.901-1 > xorg-x11-fenc 6.8.99.901-1 > xorg-x11-fnts 6.8.99.901-1 > xorg-x11-fscl 6.8.99.901-1 > xorg-x11-libs-data 6.8.99.901-1 > xorg-x11-man-pages 6.8.99.901-1 > xorg-x11-xwin 6.8.2.0-4 > xorg-x11-xwin-gl 6.8.99.901-1 > xterm 202-1 > zlib 1.2.3-1 > zsh 4.2.6-1 > Use -h to see help about each section > > > ------------------------------------------------------------------------ > > -- > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > Problem reports: http://cygwin.com/problems.html > Documentation: http://x.cygwin.com/docs/ > FAQ: http://x.cygwin.com/docs/faq/ -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dave.korn@artimi.com Fri Jul 14 16:29:00 2006 From: dave.korn@artimi.com (Dave Korn) Date: Fri, 14 Jul 2006 16:29:00 -0000 Subject: Cross-compiling instructions at http://x.cygwin.com/docs/cg/prog-build-cross.html obsolete? In-Reply-To: <44B7B66F.7020901@knaff.lu> Message-ID: <00ca01c6a762$ad0c5ce0$a501a8c0@CAM.ARTIMI.COM> On 14 July 2006 16:21, Alain Knaff wrote: > I'm trying to build a Cygwin cross compiler (i.e. a compiler that runs > on Linux but generates binaries that run on Cygwin) > For this, I tried to follow the instructions at > http://x.cygwin.com/docs/cg/prog-build-cross.html > > However, these seem to be obsolete. > > Indeed, on my Fedora Core 5, I get the following error when attempting > to configure gcc: > Copying no to /home/aknaff/cygwin/i686-pc-cygwin/sys-include > /tmp/cNf677/cNf677.tgt: line 821: cd: no: No such file or directory > Created "Makefile" in /home/aknaff/cygwin/src/gcc-3.3.1/build > /tmp/ccvcwlyc.s: Assembler messages: > /tmp/ccvcwlyc.s:5: Warning: .type pseudo-op used outside of .def/.endef > ignored. > /tmp/ccvcwlyc.s:5: Error: junk at end of line, first unrecognized > character is `m' > /tmp/ccvcwlyc.s:18: Warning: .size pseudo-op used outside of .def/.endef > ignored. > /tmp/ccvcwlyc.s:18: Error: junk at end of line, first unrecognized > character is `m' > /tmp/ccvcwlyc.s:20: Error: junk at end of line, first unrecognized > character is `-' > *** The command 'gcc -o conftest -O2 conftest.c' failed. > *** You must set the environment variable CC to a working compiler. My guess is you'd have forgotten step 9, and so it can't find the cross-binutils, and ends up attempting to use your native compiler, which is getting confused. cheers, DaveK -- Can't think of a witty .sigline today.... -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Bengt-Arne.Fjellner@ltu.se Fri Jul 14 16:37:00 2006 From: Bengt-Arne.Fjellner@ltu.se (Bengt-Arne Fjellner) Date: Fri, 14 Jul 2006 16:37:00 -0000 Subject: XWin eats cpu after upgrade In-Reply-To: References: <1945.130.240.136.130.1152884863.squirrel@pinus.tt.luth.se> Message-ID: <2310.130.240.136.130.1152895036.squirrel@pinus.tt.luth.se> Jack Tanner skrev: > Please confirm if 6.8.99.901-4 eats CPU after you reboot after Cant find this release???? (yet) > how you invoked Xwin, minimal startxwin.bat: @echo off SET DISPLAY=127.0.0.1:0.0 SET CYGWIN_ROOT=\cygwin SET PATH=.;%CYGWIN_ROOT%\bin;%CYGWIN_ROOT%\usr\X11R6\bin;%PATH% SET XAPPLRESDIR=/usr/X11R6/lib/X11/app-defaults SET XCMSDB=/usr/X11R6/lib/X11/Xcms.txt SET XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB SET XNLSPATH=/usr/X11R6/lib/X11/locale if not exist %CYGWIN_ROOT%\tmp\.X11-unix\X0 goto CLEANUP-FINISH attrib -s %CYGWIN_ROOT%\tmp\.X11-unix\X0 del %CYGWIN_ROOT%\tmp\.X11-unix\X0 :CLEANUP-FINISH if exist %CYGWIN_ROOT%\tmp\.X11-unix rmdir %CYGWIN_ROOT%\tmp\.X11-unix run XWin -multiwindow -clipboard -emulate3buttons 50 -screen 0 1280 1024 & >and what you do when it begins to eat CPU. Nothing just start it. Immediatly XWin+system eats 75-80% cpu Stop it and system takes ca 1% cpu > > Bengt-Arne Fjellner wrote: >> Upgraded XWin and then XWin starts eating lots of cpu even when idle. >> Happens only on one computer so far >> Downgrading from 6.8.99.901-4 to 6.8.2.0-4 and everything works again >> The computer where it happens is a dell P3 850MHz in a docking station >> Works ok on a P4 3GHz stationary >> Any ideas or instructions for strace or such? >> >> When running the new version system+XWin eats about 80% of the CPU >> >> cygcheck -svr is attached :) >> >> >> -- Bengt-Arne Fjellner -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ihok@hotmail.com Fri Jul 14 16:51:00 2006 From: ihok@hotmail.com (Jack Tanner) Date: Fri, 14 Jul 2006 16:51:00 -0000 Subject: XWin eats cpu after upgrade In-Reply-To: <2310.130.240.136.130.1152895036.squirrel@pinus.tt.luth.se> References: <1945.130.240.136.130.1152884863.squirrel@pinus.tt.luth.se> <2310.130.240.136.130.1152895036.squirrel@pinus.tt.luth.se> Message-ID: Bengt-Arne Fjellner wrote: > Jack Tanner skrev: >> Please confirm if 6.8.99.901-4 eats CPU after you reboot after > Cant find this release???? (yet) Well, that is the release you reported a problem in... So, if you can't find it, there's no problem. :) I'm assuming we're talking about .901-1. Try that. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Bengt-Arne.Fjellner@ltu.se Fri Jul 14 17:09:00 2006 From: Bengt-Arne.Fjellner@ltu.se (Bengt-Arne Fjellner) Date: Fri, 14 Jul 2006 17:09:00 -0000 Subject: XWin eats cpu after upgrade In-Reply-To: References: <1945.130.240.136.130.1152884863.squirrel@pinus.tt.luth.se> <2310.130.240.136.130.1152895036.squirrel@pinus.tt.luth.se> Message-ID: <1162.130.240.136.130.1152896984.squirrel@pinus.tt.luth.se> Jack Tanner skrev: > Bengt-Arne Fjellner wrote: >> Jack Tanner skrev: >>> Please confirm if 6.8.99.901-4 eats CPU after you reboot after >> Cant find this release???? (yet) > > Well, that is the release you reported a problem in... So, if you can't > find it, there's no problem. :) I'm assuming we're talking about .901-1. > Try that. OK obvoiously it should be 6.8.99.901-1 and yes the problem is there after a reboot. But i found an interesting thing. If i remove my .XWinrc it stops eating cpu. even if the file is completely empty it eats cpu. -- Bengt-Arne Fjellner -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ddenholm@esmertec.com Fri Jul 14 18:10:00 2006 From: ddenholm@esmertec.com (Dave Denholm) Date: Fri, 14 Jul 2006 18:10:00 -0000 Subject: fullscreen X server in the background Message-ID: Apologies if this has come up before - I'm currently trying out various ways of using windows as an X desktop for accessing a couple of unix (linux) machines on the lan. I expect to spend most of my time in X, with occassional forays into the local windows system when I have to. Two current options are 1) Xvnc on the remote machine, with a vnc client on windows 2) cygwin/X on the windows machine. The former has the benefit of preserving the session if I allow the local machine to suspend or hibernate. There's one other rather nice feature of tightvnc that doesn't seem to work in X/cygwin, and I was just wondering if I'm missing it, or if it would be easy to add (I can try, though it's probably a change with the windows bit, rather than the X bit, which I know a bit better...). If I run either Xwin or tightvnc in full-screen mode, the windows task bar is obscured (as expected). A double-tap on the windows key raises the task bar. The difference is that the vnc client remains in the background (with the bottom few rows obscured), and the screen continues to update. But in cygwin/X, the X server window is minimized. Now I can run Xwin with -nodecoration, which does almost the same thing, but I lose a few rows of pixels at the bottom. And maybe I can configure the windows task bar to hide / auto-raise, but that's not quite right either, since I won't be able to use the bottom few rows without windows task bar appearing and getting in the way. Is it possible for Xwin -fullscreen to stay visible when it is not in the foreground ? Incidentally, on FAQ 5.2 - I'd been puzzling over why I kept getting these BadAtom X errors with remote display - looking at the raw protocol with Ethereal, the requests looked perfectly well formed. The FAQ implies the problem is only when using ssh, but I just set DISPLAY directly to the X server (the "unsecure telnet" way described in the user guide), since I stay (mostly) within the LAN, and don't care much about security. I get the errors also using Xvnc, but at least I understand it now... Might be useful if the FAQ contained a pointer to the background on the problem. Eg http://xorg.freedesktop.org/archive/X11R6.8.0/doc/Xserver.1.html#sect8 which (as far as I can see) reveals that BadAtom is actually sent in response to a security violation. Other possible workarounds might be to disable the SECURITY extension completely (Xwin -extension SECURITY) or to configure a security policy file to not fail these requests (I've not tried this, but it sounds like it ought to work...) dd -- Dave Denholm http://www.esmertec.com -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From cgf-no-personal-reply-please@cygwin.com Fri Jul 14 18:31:00 2006 From: cgf-no-personal-reply-please@cygwin.com (Christopher Faylor) Date: Fri, 14 Jul 2006 18:31:00 -0000 Subject: Missing announcement for xorg-*-6.8.99.901-1 packages? In-Reply-To: References: <44B7A8E3.8030400@scytek.de> Message-ID: <20060714183059.GA8051@trixie.casa.cgf.cx> On Fri, Jul 14, 2006 at 11:40:02AM -0400, Jack Tanner wrote: >Volker Quetschke wrote: >>I just saw that setup wants to upgrade a lot of xorg packages. >> >>Did my mail program silently eat that announcement mail or was >>it just not send? > >I imagine Corinna pushed the packages but doesn't have time to >'announce' them. We're in-between maintainers. No, that was me but the sentiment is correct nonetheless. cgf -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ihok@hotmail.com Fri Jul 14 19:13:00 2006 From: ihok@hotmail.com (Jack Tanner) Date: Fri, 14 Jul 2006 19:13:00 -0000 Subject: XWin eats cpu after upgrade In-Reply-To: <1162.130.240.136.130.1152896984.squirrel@pinus.tt.luth.se> References: <1945.130.240.136.130.1152884863.squirrel@pinus.tt.luth.se> <2310.130.240.136.130.1152895036.squirrel@pinus.tt.luth.se> <1162.130.240.136.130.1152896984.squirrel@pinus.tt.luth.se> Message-ID: Bengt-Arne Fjellner wrote: > Jack Tanner skrev: >> Bengt-Arne Fjellner wrote: >>> Jack Tanner skrev: >>>> Please confirm if 6.8.99.901-4 eats CPU after you reboot after >>> Cant find this release???? (yet) >> Well, that is the release you reported a problem in... So, if you can't >> find it, there's no problem. :) I'm assuming we're talking about .901-1. >> Try that. > > OK obvoiously it should be 6.8.99.901-1 and yes the problem is there after a reboot. > But i found an interesting thing. If i remove my .XWinrc it stops eating cpu. > even if the file is completely empty it eats cpu. > I can't reproduce this. I see no CPU eating behavior, not with the .XWinrc below, nor with an empty one. MENU systray { xterm EXEC "xterm -display %display% -sb -sl 999" SEPARATOR } ROOTMENU systray -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Bengt-Arne.Fjellner@ltu.se Fri Jul 14 19:24:00 2006 From: Bengt-Arne.Fjellner@ltu.se (Bengt-Arne Fjellner) Date: Fri, 14 Jul 2006 19:24:00 -0000 Subject: XWin eats cpu after upgrade In-Reply-To: References: <1945.130.240.136.130.1152884863.squirrel@pinus.tt.luth.se> <2310.130.240.136.130.1152895036.squirrel@pinus.tt.luth.se> <1162.130.240.136.130.1152896984.squirrel@pinus.tt.luth.se> Message-ID: <1130.130.240.136.130.1152905090.squirrel@pinus.tt.luth.se> Jack Tanner skrev: > Bengt-Arne Fjellner wrote: >> Jack Tanner skrev: >>> Bengt-Arne Fjellner wrote: >>>> Jack Tanner skrev: >>>>> Please confirm if 6.8.99.901-4 eats CPU after you reboot after >>>> Cant find this release???? (yet) >>> Well, that is the release you reported a problem in... So, if you can't >>> find it, there's no problem. :) I'm assuming we're talking about .901-1. >>> Try that. >> >> OK obvoiously it should be 6.8.99.901-1 and yes the problem is there after a >> reboot. >> But i found an interesting thing. If i remove my .XWinrc it stops eating cpu. >> even if the file is completely empty it eats cpu. >> > > I can't reproduce this. I see no CPU eating behavior, not with the > .XWinrc below, nor with an empty one. > > MENU systray { > xterm EXEC "xterm -display %display% -sb -sl 999" > SEPARATOR > } > ROOTMENU systray > Yes I understand that. I have now "narrowed" it down a little. Not much but.... If i reboot the computer and starts new X it eats cpu. If i let the computer go to sleep and then wake it (with X running) it has stopped eating cpu. Restarting X after that no problem ...... I hope this gives somebody an idea because i dont have any. -- Bengt-Arne Fjellner -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ihok@hotmail.com Fri Jul 14 19:32:00 2006 From: ihok@hotmail.com (Jack Tanner) Date: Fri, 14 Jul 2006 19:32:00 -0000 Subject: XWin eats cpu after upgrade In-Reply-To: <1130.130.240.136.130.1152905090.squirrel@pinus.tt.luth.se> References: <1945.130.240.136.130.1152884863.squirrel@pinus.tt.luth.se> <2310.130.240.136.130.1152895036.squirrel@pinus.tt.luth.se> <1162.130.240.136.130.1152896984.squirrel@pinus.tt.luth.se> <1130.130.240.136.130.1152905090.squirrel@pinus.tt.luth.se> Message-ID: Bengt-Arne Fjellner wrote: > Jack Tanner skrev: >> Bengt-Arne Fjellner wrote: >>> Jack Tanner skrev: >>>> Bengt-Arne Fjellner wrote: >>>>> Jack Tanner skrev: >>>>>> Please confirm if 6.8.99.901-4 eats CPU after you reboot after >>>>> Cant find this release???? (yet) >>>> Well, that is the release you reported a problem in... So, if you can't >>>> find it, there's no problem. :) I'm assuming we're talking about .901-1. >>>> Try that. >>> OK obvoiously it should be 6.8.99.901-1 and yes the problem is there after a >>> reboot. >>> But i found an interesting thing. If i remove my .XWinrc it stops eating cpu. >>> even if the file is completely empty it eats cpu. >>> >> I can't reproduce this. I see no CPU eating behavior, not with the >> .XWinrc below, nor with an empty one. >> >> MENU systray { >> xterm EXEC "xterm -display %display% -sb -sl 999" >> SEPARATOR >> } >> ROOTMENU systray >> > > Yes I understand that. I have now "narrowed" it down a little. > Not much but.... If i reboot the computer and starts new X it eats cpu. > If i let the computer go to sleep and then wake it (with X running) it has stopped > eating cpu. Restarting X after that no problem ...... > I hope this gives somebody an idea because i dont have any. > Nope, no idea. :) Do ask again if you can narrow it down further. For example, try to disable things that otherwise run on start-up. Also, make sure you're not using a software firewall such as ZoneAlarm. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Bengt-Arne.Fjellner@ltu.se Sat Jul 15 17:31:00 2006 From: Bengt-Arne.Fjellner@ltu.se (Bengt-Arne Fjellner) Date: Sat, 15 Jul 2006 17:31:00 -0000 Subject: XWin eats cpu after upgrade In-Reply-To: References: <1945.130.240.136.130.1152884863.squirrel@pinus.tt.luth.se> <2310.130.240.136.130.1152895036.squirrel@pinus.tt.luth.se> <1162.130.240.136.130.1152896984.squirrel@pinus.tt.luth.se> <1130.130.240.136.130.1152905090.squirrel@pinus.tt.luth.se> Message-ID: <1196.130.240.136.197.1152984698.squirrel@pinus> Jack Tanner skrev: > Bengt-Arne Fjellner wrote: >> Jack Tanner skrev: >>> Bengt-Arne Fjellner wrote: >>>> Jack Tanner skrev: >>>>> Bengt-Arne Fjellner wrote: >>>>>> Jack Tanner skrev: >>>>>>> Please confirm if 6.8.99.901-4 eats CPU after you reboot after >>>>>> Cant find this release???? (yet) >>>>> Well, that is the release you reported a problem in... So, if you can't >>>>> find it, there's no problem. :) I'm assuming we're talking about .901-1. >>>>> Try that. >>>> OK obvoiously it should be 6.8.99.901-1 and yes the problem is there after a >>>> reboot. >>>> But i found an interesting thing. If i remove my .XWinrc it stops eating cpu. >>>> even if the file is completely empty it eats cpu. >>>> >>> I can't reproduce this. I see no CPU eating behavior, not with the >>> .XWinrc below, nor with an empty one. >>> >>> MENU systray { >>> xterm EXEC "xterm -display %display% -sb -sl 999" >>> SEPARATOR >>> } >>> ROOTMENU systray >>> >> >> Yes I understand that. I have now "narrowed" it down a little. >> Not much but.... If i reboot the computer and starts new X it eats cpu. >> If i let the computer go to sleep and then wake it (with X running) it has stopped >> eating cpu. Restarting X after that no problem ...... >> I hope this gives somebody an idea because i dont have any. >> > > Nope, no idea. :) Do ask again if you can narrow it down further. For > example, try to disable things that otherwise run on start-up. Also, > make sure you're not using a software firewall such as ZoneAlarm. > No but Kerio personal firewall .......... And yes thats the problem. It has worked flawless before but not with this version at that computer with those settings....... Grrr i loved that firewall. What to do now Arrrghhhhhhhhh. Still checking if configuration matters but i dont have much hope. P.S. Thanks for the help. -- Bengt-Arne Fjellner -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From jochen.wiedmann@gmail.com Mon Jul 17 00:06:00 2006 From: jochen.wiedmann@gmail.com (Jochen Wiedmann) Date: Mon, 17 Jul 2006 00:06:00 -0000 Subject: Unable to connect via XDMCP to VMWare/Fedora Core 5 Message-ID: Hi, I am running a Windows XP host with CygWin/X. On the same host I have a VMWare instance with Fedora Core 5. I'd like to connect to GDM via XDMCP. Things I did on the FC 5 guest: - Disabled iptables - Enabled remote login and debugging messages via gdmsetup On the windows host, I am entering XWin -query 192.168.1.129 where 192.168.1.129 is the guests IP address and .128 is the Windows hosts. In Ethereal, I can watch the following packet sequence: XDMCP Manage XDMCP Willing XDMCP Request XDMCP Manage XDMCP Manage XDMCP Manage XDMCP Manage but apparently nothing else. The gdm log can be found below. Any ideas, what might be wrong? Thanks, Jochen -- Whenever you find yourself on the side of the majority, it is time to pause and reflect. (Mark Twain) -------------- next part -------------- A non-text attachment was scrubbed... Name: messages Type: application/octet-stream Size: 14291 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From jocrag@gmail.com Mon Jul 17 00:23:00 2006 From: jocrag@gmail.com (Craig Smith) Date: Mon, 17 Jul 2006 00:23:00 -0000 Subject: Problem with starting X server In-Reply-To: <7731110b0607161707k475b7c3buada2491b1b27b449@mail.gmail.com> References: <7731110b0607161707k475b7c3buada2491b1b27b449@mail.gmail.com> Message-ID: <7731110b0607161723j246e6578t45c24c94319b224e@mail.gmail.com> I am getting the following text in XWin.log: (WW) /tmp mounted int textmode _XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root (II) XF86Config is not supported (II) See x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winAdjustVideoModeShadowGDI - Using Windows display depth of 32 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1680 height: 1050 depth: 32 winInitVisualsShadowGDI - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 bpp 32 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winMultiWindowXMsgProc - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shar ed memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000409" (00000409) (--) Using preset keyboard for "English (USA)" (409), type "4" (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from li st! Fatal server error: could not open default font 'fixed' winDeinitMultiWindowWM - Noting shutdown in progress I have tried the remedy noted at x.cygwin.com/docs/faq/cygwin-x-faq.html#q-error-font-eof to no avail. In fact the umount command noted returns no mount found. I have tried reinstalling X, completely uninstalling cygwin and reinstalling it, to no avail. Googling the problem only points me to the FAQ over and over again. Any ideas on some other things I could try? Thanks, Craig Smith -- Craig Smith -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From s_g_brown@aapt.net.au Mon Jul 17 04:48:00 2006 From: s_g_brown@aapt.net.au (Stephen Grant Brown) Date: Mon, 17 Jul 2006 04:48:00 -0000 Subject: XWin Server Failure Message-ID: <001501c6a95c$2b266620$0100a8c0@JIREH> Dear Cygwin users Last night I updated all of sygwin installation. The "Start X Server" icon on the desktop worked fine before the upgrade. After the upgrade I get the errors as in the attached files.. Did the upgrade cause the working configuration to stop working? What do I do to fix it? Yours Sincerely Stephen Grant Brown -------------- next part -------------- A non-text attachment was scrubbed... Name: CygwinX.bmp Type: image/bmp Size: 43162 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: XWinLog.bmp Type: image/bmp Size: 166102 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From djpicton@gmail.com Mon Jul 17 09:41:00 2006 From: djpicton@gmail.com (David Picton) Date: Mon, 17 Jul 2006 09:41:00 -0000 Subject: X server version 6.8.99.901 Message-ID: <2fc802c00607170241s29385f78k8762acdefca2bc1@mail.gmail.com> I've updated the X software to 6.8.99.901 and noticed two problems with the new X server: 1. CNTL-ALT-BKSP doesn't terminate the server cleanly. There's no confirmation dialogue and /tmp/.X11-unix/X0 is not deleted. However, the new server does terminate properly if I right-click the X icon in the taskbar and select exit. 2. It is not possible to start the X server if another user created the /tmp/.X11-unix file but failed to delete it. To reproduce the bug: Log into a user in the Administrators group, start the X server, then log out. The /tmp/.X11-unix/X0 socket will be left in place. Log into a non-Administrator user and attempt to start the X server using startxwin.bat. The startxwin session will report that /tmp/.X11-unix/X0 could not be deleted (because /tmp/.X11-unix is a 'sticky' directory). The X server will not start and its log file will show that it thought that another server was running. The previous X server was quite happy to re-use an X0 socket created by another user. I worked round the problem by hacking startxwin.bat to do the following after the X server had been started: %CYGWIN_ROOT%\bin\sleep 5 %CYGWIN_ROOT%\bin\chmod -t /tmp/.X11-unix This ensures that /tmp/.X11-unix will be non-sticky, so any user will be able to clean up the X0 socket. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From quergle-cygwin@yahoo.co.uk Mon Jul 17 13:01:00 2006 From: quergle-cygwin@yahoo.co.uk (Andy Rushton) Date: Mon, 17 Jul 2006 13:01:00 -0000 Subject: ImageMagick 6.0.4 no longer executes with package xorg-x11-bin-dlls 6.8.99.901-1 Message-ID: <44BB8A1E.7010303@yahoo.co.uk> Hi all, I have found a problem with ImageMagick 6.0.4 running with xorg-x11-bin-dlls 6.8.99.901-1 - and I've found a temporary fix. Problem: After a recent update to my Cygwin installation, which updated the X11 packages amongst many other things, the 'convert' program stopped working. It simply exited silently with an error status. I discovered with gdb that it was failing with an unknown exception but I could find no more information. It turned out, thanks to running 'cygcheck convert', that this was because of a missing DLL, specifically /usr/X11R6/bin/cygdpstk-1.dll. A bit more digging and I found that this DLL used to be part of package xorg-x11-bin-dlls but has been removed with the latest release - 6.8.99.901-1. It existed in all versions (as far as I have been able to find out) up to this one. I also discovered that this DLL itself relies on another missing DLL: /usr/X11R6/bin/cygdps-1.dll which I found in the same package. Work-around: I've fixed the problem for myself by grabbing these DLLs from the previous version of this package (xorg-x11-bin-dlls-6.8.2.0) and hand-installing them by copying them into the relevant directory. Fortunately they are still compatible with the other DLLs they depend on. Andy -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From knellis@syntek-usa.com Mon Jul 17 14:13:00 2006 From: knellis@syntek-usa.com (Kenneth Nellis) Date: Mon, 17 Jul 2006 14:13:00 -0000 Subject: fatal error with X Server 6.8.99.901-1 Message-ID: <000001c6a9aa$f2592220$be32000a@idirect.net> Since upgrading X Server from 6.8.2.0-4 to 6.8.99.901-1, I get a Windows alert box after opening a second xterm window using the startxwin.bat script, which apparently used to be able to detect whether X Server was already running or not so as not to attempt to start multiple instances. This detection mechanism seems to be broken with the new release. Despite the fact that "a fatal error has occurred and Cygwin/X will now exit", all seems to work just fine after dismissing the alert box. Reverting back to 6.8.2.0-4, all seems to work as before, even with all the other new X stuff, which didn't seem to be announced. Perhaps some caveats would have been mentioned. The alert box directs me to file /tmp/XWin.log, which I copy, below. The alert box also says: XWin was started with the following command line: /usr/X11R6/bin/XWin -multiwindow -clipboard -silent-dup-error Attached is "cygcheck -svr" output. Wondering if X Server is broken or the startxwin.bat script or what, but for now, the older version seems to be working just fine. --Ken Nellis ========= /tmp/XWin.log ======================== _XSERVTransSocketINETCreateListener: ...SocketCreateListener() failed _XSERVTransMakeAllCOTSServerListeners: server already running Fatal server error: Cannot establish any listening sockets - Make sure an X server isn't already running ======= end /tmp/XWin.log ======================= -------------- next part -------------- A non-text attachment was scrubbed... Name: cygcheck.out Type: application/octet-stream Size: 29010 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From knellis@syntek-usa.com Mon Jul 17 14:22:00 2006 From: knellis@syntek-usa.com (Kenneth Nellis) Date: Mon, 17 Jul 2006 14:22:00 -0000 Subject: fatal error with X Server 6.8.99.901-1 Message-ID: <000401c6a9ac$1eb734f0$be32000a@idirect.net> Apologies for the long lines in my previous message. Haven't figured out yet how to control Outlook. (Suggestions welcome.) --Ken Nellis -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From cgf-no-personal-reply-please@cygwin.com Mon Jul 17 14:24:00 2006 From: cgf-no-personal-reply-please@cygwin.com (Christopher Faylor) Date: Mon, 17 Jul 2006 14:24:00 -0000 Subject: fatal error with X Server 6.8.99.901-1 In-Reply-To: <000401c6a9ac$1eb734f0$be32000a@idirect.net> References: <000401c6a9ac$1eb734f0$be32000a@idirect.net> Message-ID: <20060717142447.GC15465@trixie.casa.cgf.cx> On Mon, Jul 17, 2006 at 10:20:09AM -0400, Kenneth Nellis wrote: >Apologies for the long lines in my previous message. >Haven't figured out yet how to control Outlook. >(Suggestions welcome.) But suggestions do not go here. cgf -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From goulet@ll.mit.edu Mon Jul 17 18:40:00 2006 From: goulet@ll.mit.edu (Stephen A.Goulet) Date: Mon, 17 Jul 2006 18:40:00 -0000 Subject: Problem with starting X server In-Reply-To: <7731110b0607161723j246e6578t45c24c94319b224e@mail.gmail.com> References: <7731110b0607161707k475b7c3buada2491b1b27b449@mail.gmail.com> <7731110b0607161723j246e6578t45c24c94319b224e@mail.gmail.com> Message-ID: <44BBD9A1.9060805@ll.mit.edu> Jim, It this is the root of your problem: > Fatal server error: >> could not open default font 'fixed' >> winDeinitMultiWindowWM - Noting shutdown in progress This is what finally worked for me. Start cygwin and do a df, if this show the mount points, /usr, /usr/bin/, and /usr/lib. Then umount /usr and close the cygwin window. Now do the reinstall of the fonts as documented in the FAQ. The mount point mentioned in the FAQ doesn't exist, so this took care of my problem. I wished they where a little clearer in what has the wrong infomation that unumounting and reinstalling resolves. Hopes this helps. Steve Craig Smith wrote: > I am getting the following text in XWin.log: > > (WW) /tmp mounted int textmode > _XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root > (II) XF86Config is not supported > (II) See x.cygwin.com/docs/faq/cygwin-x-faq.html for more information > winAdjustVideoModeShadowGDI - Using Windows display depth of 32 bits per > pixel > winAllocateFBShadowGDI - Creating DIB with width: 1680 height: 1050 > depth: 32 > winInitVisualsShadowGDI - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 > bpp 32 > null screen fn ReparentWindow > null screen fn RestackWindow > InitQueue - Calling pthread_mutex_init > InitQueue - pthread_mutex_init returned > InitQueue - Calling pthread_cond_init > InitQueue - pthread_cond_init returned > winInitMultiWindowWM - Hello > winMultiWindowXMsgProc - Hello > winInitMultiWindowWM - Calling pthread_mutex_lock () > winMultiWindowXMsgProc - Calling pthread_mutex_lock () > MIT-SHM extension disabled due to lack of kernel support > XFree86-Bigfont extension local-client optimization disabled due to > lack of shar > ed memory support in the kernel > (--) Setting autorepeat to delay=500, rate=31 > (--) winConfigKeyboard - Layout: "00000409" (00000409) > (--) Using preset keyboard for "English (USA)" (409), type "4" > (--) 3 mouse buttons found > Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, > removing from li > st! > > Fatal server error: > could not open default font 'fixed' > winDeinitMultiWindowWM - Noting shutdown in progress > > I have tried the remedy noted at > x.cygwin.com/docs/faq/cygwin-x-faq.html#q-error-font-eof to no avail. > In fact the umount command noted returns no mount found. I have tried > reinstalling X, completely uninstalling cygwin and reinstalling it, to > no avail. Googling the problem only points me to the FAQ over and over > again. Any ideas on some other things I could try? > > Thanks, > Craig Smith > -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From quergle-cygwin@yahoo.co.uk Mon Jul 17 21:07:00 2006 From: quergle-cygwin@yahoo.co.uk (Andy Rushton) Date: Mon, 17 Jul 2006 21:07:00 -0000 Subject: Problem with starting X server In-Reply-To: <44BBD9A1.9060805@ll.mit.edu> References: <7731110b0607161707k475b7c3buada2491b1b27b449@mail.gmail.com> <7731110b0607161723j246e6578t45c24c94319b224e@mail.gmail.com> <44BBD9A1.9060805@ll.mit.edu> Message-ID: <44BBFBF4.2000607@yahoo.co.uk> Stephen A.Goulet wrote: > This is what finally worked for me. Start cygwin and do a df, if > this show the mount points, /usr, /usr/bin/, and /usr/lib. Then > umount /usr and close the cygwin window. Now do the reinstall of the > fonts as documented in the FAQ. I agree, but wanted to add to this feedback. I have found that you need to mount the fonts in binary mode. You see, I go against the recommended practice and install Cygwin in Text mode - i.e. text files have DOS line-endings. I find that this allows better inter-operation between Cygwin apps and Windows apps. However, this seems to break X11's fonts (I *suspect* that somewhere in X the fonts are being opened in text mode when they are binary files but I haven't been able to confirm this). If this is your problem, the solution is to separately mount the font directory in binary mode - for example, my mount table contains the following: e:\cygwin\usr\X11R6\lib\X11\fonts on /usr/X11R6/lib/X11/fonts type system (binmode) E:\cygwin\bin on /usr/bin type system (textmode) E:\cygwin\lib on /usr/lib type system (textmode) E:\cygwin on / type system (textmode) c: on /cygdrive/c type system (textmode,noumount) d: on /cygdrive/d type system (textmode,noumount) e: on /cygdrive/e type system (textmode,noumount) Note the first entry. Once I have this extra mount point for the X11 fonts, I reinstalled all the fonts using the Cygwin installer - which has a 'reinstall' option for each package. The reinstall means that the font indexes get regenerated. FYI the command for generating extra mount points is called 'mount'. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From M.Janczak@adbglobal.com Tue Jul 18 10:05:00 2006 From: M.Janczak@adbglobal.com (Mariusz Janczak) Date: Tue, 18 Jul 2006 10:05:00 -0000 Subject: Problem with starting X server References: <7731110b0607161707k475b7c3buada2491b1b27b449@mail.gmail.com> <7731110b0607161723j246e6578t45c24c94319b224e@mail.gmail.com> <44BBD9A1.9060805@ll.mit.edu> Message-ID: For me the problem is still opened. I do not have the /usr point in my mount point list. I have tried to follow all steps suggested at x.cygwin.com/docs/faq/cygwin-x-faq.html#q-error-font-eof but it still doesn't work. I have also reinstalled all X components. All those doesn't work. I'm using cygwin under the Windows OS. -- Mariusz Janczak -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From quetschke@scytek.de Tue Jul 18 14:26:00 2006 From: quetschke@scytek.de (Volker Quetschke) Date: Tue, 18 Jul 2006 14:26:00 -0000 Subject: xmgrace fails to start In-Reply-To: <44BC9C4B.1020508@gamma-rs.ch> References: <44BC9C4B.1020508@gamma-rs.ch> Message-ID: <44BCEF84.2010207@scytek.de> This is an X problem, redirecting to the correct ml. Charles L. Werner wrote: > H > Hi all, > > Recently I attempted to run the xmgrace application (installed from the > xmgrace cygwin package) and > it fails to start. After typing the command and after a 1 or 2 second > delay, it simply returns with > no statement or anything. Yes, reproducible. But not cygwin1.dll is the culprit but xorg 6.8.99.901-1. I updated the cygwin installation to the latest and greatest except the xorg packages and xmgrace still ran. After updating xorg-x11-* from 6.8.2.0-1 to 6.8.99.901-1 I get exactly the behavior you describe. Any hints to solve this are appreciated. Volker (cygwin xmgrace maintainer) -- PGP/GPG key (ID: 0x9F8A785D) available from wwwkeys.de.pgp.net key-fingerprint 550D F17E B082 A3E9 F913 9E53 3D35 C9BA 9F8A 785D -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 254 bytes Desc: OpenPGP digital signature URL: From cw@gamma-rs.ch Tue Jul 18 15:12:00 2006 From: cw@gamma-rs.ch (Charles L. Werner) Date: Tue, 18 Jul 2006 15:12:00 -0000 Subject: xmgrace fails to start In-Reply-To: <44BCEF84.2010207@scytek.de> References: <44BC9C4B.1020508@gamma-rs.ch> <44BCEF84.2010207@scytek.de> Message-ID: <44BCFA56.30407@gamma-rs.ch> Thanks! I just sent (before your email) another message to the cygwin list showing the result of running strace on xmgrace. Cheers, Charles Volker Quetschke wrote: > This is an X problem, redirecting to the correct ml. > > Charles L. Werner wrote: >> H >> Hi all, >> >> Recently I attempted to run the xmgrace application (installed from >> the xmgrace cygwin package) and >> it fails to start. After typing the command and after a 1 or 2 second >> delay, it simply returns with >> no statement or anything. > > Yes, reproducible. But not cygwin1.dll is the culprit but xorg > 6.8.99.901-1. > > I updated the cygwin installation to the latest and greatest except > the xorg packages and xmgrace still ran. > > After updating xorg-x11-* from 6.8.2.0-1 to 6.8.99.901-1 I get exactly > the behavior you describe. > > Any hints to solve this are appreciated. > > Volker > > (cygwin xmgrace maintainer) > -- Dr. Charles L. Werner Gamma Remote Sensing AG Worbstr. 225 CH-3073 G??mligen, Switzerland Tel: +41 31 951 70 05 FAX: +41 31 951 70 08 http://www.gamma-rs.ch -------------- next part -------------- An embedded message was scrubbed... From: "Charles L. Werner" Subject: Re: xmgrace fails to start Date: Tue, 18 Jul 2006 17:10:18 +0200 Size: 959 URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From bbarcenas@gmail.com Tue Jul 18 16:13:00 2006 From: bbarcenas@gmail.com (bobby barcenas) Date: Tue, 18 Jul 2006 16:13:00 -0000 Subject: xwin problem Message-ID: hello, I have been using cygwin and the x server very well for a couple of years now, thank you, but recently I tried to update some of my files because i was unable to run and opengl dependent file on xwin. so i looked online and ran setup.exe and installed the appropate files. however, when that setup was compete i could no longer run xwin. whenever i type startx into cygwin, i get an error message because it cant find a font in a directory that does not exist on my computer: /usr/x11r6/lib/x11/fonts/Cid I then tried to reinstall my entire cygwin and it still doesnt work. could you help me out? i have included the tmp log file. thanks -- bbarcenas@gmail.com Bobby Barcenas -------------- next part -------------- A non-text attachment was scrubbed... Name: XWin.log Type: application/octet-stream Size: 1406 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Randy.Brown@noaa.gov Tue Jul 18 16:51:00 2006 From: Randy.Brown@noaa.gov (Randy Brown) Date: Tue, 18 Jul 2006 16:51:00 -0000 Subject: -silent-dup-error for XWin.exe not working Message-ID: <44BD1198.8090809@noaa.gov> The latest version of XWin.exe that I got today is not recognizing the -silent-dup-error switch. The version I am running is 6.8.99.901-4 The previous version, 6.8.2.0-4 did not have this issue. Is this a known issue? Is there a fix in the works? Thanks, Randy -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pechtcha@cs.nyu.edu Tue Jul 18 17:11:00 2006 From: pechtcha@cs.nyu.edu (Igor Peshansky) Date: Tue, 18 Jul 2006 17:11:00 -0000 Subject: Problem with starting X server In-Reply-To: <44BBFBF4.2000607@yahoo.co.uk> References: <7731110b0607161707k475b7c3buada2491b1b27b449@mail.gmail.com> <7731110b0607161723j246e6578t45c24c94319b224e@mail.gmail.com> <44BBD9A1.9060805@ll.mit.edu> <44BBFBF4.2000607@yahoo.co.uk> Message-ID: On Mon, 17 Jul 2006, Andy Rushton wrote: > Stephen A.Goulet wrote: > > This is what finally worked for me. Start cygwin and do a df, if > > this show the mount points, /usr, /usr/bin/, and /usr/lib. Then > > umount /usr and close the cygwin window. Now do the reinstall of the > > fonts as documented in the FAQ. > > I agree, but wanted to add to this feedback. > > I have found that you need to mount the fonts in binary mode. You see, I > go against the recommended practice and install Cygwin in Text mode - > i.e. text files have DOS line-endings. I find that this allows better > inter-operation between Cygwin apps and Windows apps. However, this > seems to break X11's fonts (I *suspect* that somewhere in X the fonts > are being opened in text mode when they are binary files but I haven't > been able to confirm this). If this is your problem, the solution is to > separately mount the font directory in binary mode - for example, my > mount table contains the following: > > e:\cygwin\usr\X11R6\lib\X11\fonts on /usr/X11R6/lib/X11/fonts type system (binmode) > E:\cygwin\bin on /usr/bin type system (textmode) > E:\cygwin\lib on /usr/lib type system (textmode) > E:\cygwin on / type system (textmode) > c: on /cygdrive/c type system (textmode,noumount) > d: on /cygdrive/d type system (textmode,noumount) > e: on /cygdrive/e type system (textmode,noumount) This mount used to be routinely added by the X postinstall script. IIRC, this has been fixed in X so that such a mount is no longer required. Searching the list archives may unearth the relevant thread. However, the bug may have crept back, or may not have been propagated to the latest Cygwin/X release. > Note the first entry. Once I have this extra mount point for the X11 > fonts, I reinstalled all the fonts using the Cygwin installer - which > has a 'reinstall' option for each package. The reinstall means that the > font indexes get regenerated. The regeneration of indexes is done by the postinstall script, which you could have re-run without reinstalling the font packages. Simply run each of /etc/postinstall/xorg-x11-f*.sh.done. > FYI the command for generating extra mount points is called 'mount'. HTH, Igor -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From alexander.gottwald@s1999.tu-chemnitz.de Tue Jul 18 21:55:00 2006 From: alexander.gottwald@s1999.tu-chemnitz.de (Alexander Gottwald) Date: Tue, 18 Jul 2006 21:55:00 -0000 Subject: Problem with starting X server In-Reply-To: References: <7731110b0607161707k475b7c3buada2491b1b27b449@mail.gmail.com> <7731110b0607161723j246e6578t45c24c94319b224e@mail.gmail.com> <44BBD9A1.9060805@ll.mit.edu> <44BBFBF4.2000607@yahoo.co.uk> Message-ID: <44BD58BB.4010904@s1999.tu-chemnitz.de> Igor Peshansky wrote: > This mount used to be routinely added by the X postinstall script. IIRC, > this has been fixed in X so that such a mount is no longer required. > Searching the list archives may unearth the relevant thread. However, the > bug may have crept back, or may not have been propagated to the latest > Cygwin/X release. I suspect that some bugfixes which were present in the CYGWIN branch on freedesktop are missing in the branch which was the source for the latest release. Most likely fonts.dir is not written in binmode. Patching mkfontscale might help or forcing mkfontscale to work in binmode when started from font-update. bye ago -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From paulwang@uiuc.edu Tue Jul 18 23:55:00 2006 From: paulwang@uiuc.edu (Paul Wang) Date: Tue, 18 Jul 2006 23:55:00 -0000 Subject: Getting an older version of cygwin Message-ID: <8c10f3c6.d9ff7d5c.878e500@expms3.cites.uiuc.edu> Christopher, How do I obtain an older version of cygwin? I want to get cygwin-1.5.18 Thanks Best Regards Paul -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From quergle-cygwin@yahoo.co.uk Tue Jul 18 23:55:00 2006 From: quergle-cygwin@yahoo.co.uk (Andy Rushton) Date: Tue, 18 Jul 2006 23:55:00 -0000 Subject: Problem with starting X server In-Reply-To: <44BD58BB.4010904@s1999.tu-chemnitz.de> References: <7731110b0607161707k475b7c3buada2491b1b27b449@mail.gmail.com> <7731110b0607161723j246e6578t45c24c94319b224e@mail.gmail.com> <44BBD9A1.9060805@ll.mit.edu> <44BBFBF4.2000607@yahoo.co.uk> <44BD58BB.4010904@s1999.tu-chemnitz.de> Message-ID: <44BD74CF.5070508@yahoo.co.uk> Alexander Gottwald wrote: > I suspect that some bugfixes which were present in the CYGWIN branch > on freedesktop are missing in the branch which was the source for the > latest release. Just to confirm that the bug indeed *seems* to have crept back. I updated to the latest release and then the server would not start due to the "cannot find font 'fixed'" problem. Re-mounted the fonts directory in binmode, reinstalled just the fonts and it all works. Fortunately I remembered this work-around from some time back when I last had this problem. Sorry, I have no recollection when or what version. I guess most people won't have any problems because they install Cygwin with Unix newlines, thus making textmode and binmode identical. Thus no cacophony of complaints. -- Andy Rushton, Southampton, UK Fortune and love befriend the bold. -- Ovid -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From quergle-cygwin@yahoo.co.uk Wed Jul 19 00:01:00 2006 From: quergle-cygwin@yahoo.co.uk (Andy Rushton) Date: Wed, 19 Jul 2006 00:01:00 -0000 Subject: xwin problem In-Reply-To: References: Message-ID: <44BD765A.9090603@yahoo.co.uk> bobby barcenas wrote: > hello, > I have been using cygwin and the x server very well for a couple of > years now, thank you, but recently I tried to update some of my files > because i was unable to run and opengl dependent file on xwin. so i > looked online and ran setup.exe and installed the appropate files. > however, when that setup was compete i could no longer run xwin. > whenever i type startx into cygwin, i get an error message because it > cant find a font in a directory that does not exist on my computer: > /usr/x11r6/lib/x11/fonts/Cid Actually the log shows: ------------- Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! Fatal server error: could not open default font 'fixed' ------------- The first bit about dah/dit/dah/CID is just a warning. The other message is the error. This issue has just been resolved in the thread "Problem with starting X server". -- Andy Rushton, Southampton, UK Fortune and love befriend the bold. -- Ovid -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Wed Jul 19 00:13:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Wed, 19 Jul 2006 00:13:00 -0000 Subject: Getting an older version of cygwin In-Reply-To: <8c10f3c6.d9ff7d5c.878e500@expms3.cites.uiuc.edu> References: <8c10f3c6.d9ff7d5c.878e500@expms3.cites.uiuc.edu> Message-ID: <44BD7922.3010808@cygwin.com> Paul Wang wrote: > Christopher, > > How do I obtain an older version of cygwin? I want to get > cygwin-1.5.18 This isn't a personal email list. If you want to address someone specifically, you should probably contact them off-list or at least narrow down which of multiple Christophers you're addressing. The cygwin-1.5.18 package is out-dated and not offered by cygwin.com anymore. That also means it's not supported by the Cygwin mailing lists. If you absolutely must have 1.5.18 for some arcane reason, you can Google for the Cygwin Time Machine and be on your own for any future problems you may have as a result of using this version. A better approach is to report problems so that they can be addressed in a future version of the cygwin package. That way you are not forever stuck in the past. Also, this inquiry is notably not Cygwin-X specific. As such, it would be better to address questions like this to the main Cygwin list. I've reset the reply-to appropriately. If you need to follow-up for some reason, please heed that setting. -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From cgf-no-personal-reply-please@cygwin.com Wed Jul 19 03:15:00 2006 From: cgf-no-personal-reply-please@cygwin.com (Christopher Faylor) Date: Wed, 19 Jul 2006 03:15:00 -0000 Subject: Getting an older version of cygwin In-Reply-To: <44BD7922.3010808@cygwin.com> References: <8c10f3c6.d9ff7d5c.878e500@expms3.cites.uiuc.edu> <44BD7922.3010808@cygwin.com> Message-ID: <20060719031553.GA13810@trixie.casa.cgf.cx> On Tue, Jul 18, 2006 at 08:13:22PM -0400, Larry Hall (Cygwin X) wrote: >Paul Wang wrote: >>Christopher, >> >>How do I obtain an older version of cygwin? I want to get >>cygwin-1.5.18 > >This isn't a personal email list. If you want to address someone >specifically, you should probably contact them off-list or at least >narrow down which of multiple Christophers you're addressing. And, if I am the Christopher in question, please note that I don't want to be contacted personally about cygwin issues at all. cgf -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pechtcha@cs.nyu.edu Wed Jul 19 04:03:00 2006 From: pechtcha@cs.nyu.edu (Igor Peshansky) Date: Wed, 19 Jul 2006 04:03:00 -0000 Subject: Problem with starting X server In-Reply-To: <44BD74CF.5070508@yahoo.co.uk> References: <7731110b0607161707k475b7c3buada2491b1b27b449@mail.gmail.com> <7731110b0607161723j246e6578t45c24c94319b224e@mail.gmail.com> <44BBD9A1.9060805@ll.mit.edu> <44BBFBF4.2000607@yahoo.co.uk> <44BD58BB.4010904@s1999.tu-chemnitz.de> <44BD74CF.5070508@yahoo.co.uk> Message-ID: On Wed, 19 Jul 2006, Andy Rushton wrote: > Alexander Gottwald wrote: > > I suspect that some bugfixes which were present in the CYGWIN branch on > > freedesktop are missing in the branch which was the source for the latest > > release. > > Just to confirm that the bug indeed *seems* to have crept back. I > updated to the latest release and then the server would not start due to > the "cannot find font 'fixed'" problem. Re-mounted the fonts directory > in binmode, reinstalled just the fonts and it all works. Fortunately I > remembered this work-around from some time back when I last had this > problem. Sorry, I have no recollection when or what version. > > I guess most people won't have any problems because they install Cygwin > with Unix newlines, thus making textmode and binmode identical. Thus no > cacophony of complaints. As a short-term solution, perhaps we could reinstate the mounting of the fonts directory in binmode in the postinstall script (using something like ) until the fixes from the CYGWIN branch can be released. Igor -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From alanh@fairlite.demon.co.uk Wed Jul 19 08:46:00 2006 From: alanh@fairlite.demon.co.uk (Alan Hourihane) Date: Wed, 19 Jul 2006 08:46:00 -0000 Subject: Problem with starting X server In-Reply-To: <44BD58BB.4010904@s1999.tu-chemnitz.de> References: <7731110b0607161707k475b7c3buada2491b1b27b449@mail.gmail.com> <7731110b0607161723j246e6578t45c24c94319b224e@mail.gmail.com> <44BBD9A1.9060805@ll.mit.edu> <44BBFBF4.2000607@yahoo.co.uk> <44BD58BB.4010904@s1999.tu-chemnitz.de> Message-ID: <1153298772.10793.2.camel@jetpack.demon.co.uk> On Tue, 2006-07-18 at 23:55 +0200, Alexander Gottwald wrote: > Igor Peshansky wrote: > > This mount used to be routinely added by the X postinstall script. IIRC, > > this has been fixed in X so that such a mount is no longer required. > > Searching the list archives may unearth the relevant thread. However, the > > bug may have crept back, or may not have been propagated to the latest > > Cygwin/X release. > > I suspect that some bugfixes which were present in the CYGWIN branch on > freedesktop are missing in the branch which was the source for the > latest release. > > Most likely fonts.dir is not written in binmode. Patching mkfontscale > might help or forcing mkfontscale to work in binmode when started from > font-update. I see that the fix on the CYGWIN branch is to do this. So I'll make the change in the X.org repos. Alan. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From clw2@freesurf.ch Wed Jul 19 20:16:00 2006 From: clw2@freesurf.ch (Charles Werner) Date: Wed, 19 Jul 2006 20:16:00 -0000 Subject: REe: xmgrace fails to start Message-ID: <44BE9306.60005@freesurf.ch> I attempted to downgrade to the previous X-server version, but experienced the same errors as before with starting xmgrace. What is the approved way to downgrade cleanly? Charles -- Charles and Margat Werner Grossmatt 4m CH-3111 T??gertschi Switzerland Tel: +41 (0)31 721 55 53 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Bengt-Arne.Fjellner@ltu.se Thu Jul 20 20:52:00 2006 From: Bengt-Arne.Fjellner@ltu.se (Bengt-Arne Fjellner) Date: Thu, 20 Jul 2006 20:52:00 -0000 Subject: bug in XWin or xemacs Message-ID: <3328.130.240.136.130.1153428723.squirrel@pinus.tt.luth.se> Xemacs (at least) does not "completely lose focus" even when covered with another application. To reproduce start xemacs. Cover it with another window (i.e. notepad) and let your mouse hover where a button with a tooltip would be( it has to be the textarea). And suddenly a tooltip appears even though notepad has the focus. Textinput and mousclick goes to notepad. Also happens with internet explorer and others. cygcheck -svr attached. -- Bengt-Arne Fjellner -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: cygcheck.out URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From owen.rees@hp.com Fri Jul 21 10:08:00 2006 From: owen.rees@hp.com (Owen Rees) Date: Fri, 21 Jul 2006 10:08:00 -0000 Subject: bug in XWin or xemacs In-Reply-To: <3328.130.240.136.130.1153428723.squirrel@pinus.tt.luth.se> References: <3328.130.240.136.130.1153428723.squirrel@pinus.tt.luth.se> Message-ID: <843A025AB10DC082C8C137F5@orees.hpl.hp.com> See the thread "Popups popping through windows using built-in rootless WM" which can be found in the archive starting at . I suspect that this problem will require fairly deep understanding of how Cygwin/X works, plus a fair bit of time to investigate it. According to the Cygwin/X web site we still do not have a maintainer so I don't expect to see progress on this bug soon. -- Owen Rees Hewlett Packard Laboratories, Bristol, UK -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Bengt-Arne.Fjellner@ltu.se Fri Jul 21 11:56:00 2006 From: Bengt-Arne.Fjellner@ltu.se (Bengt-Arne Fjellner) Date: Fri, 21 Jul 2006 11:56:00 -0000 Subject: bug in XWin or xemacs In-Reply-To: <843A025AB10DC082C8C137F5@orees.hpl.hp.com> References: <3328.130.240.136.130.1153428723.squirrel@pinus.tt.luth.se> <843A025AB10DC082C8C137F5@orees.hpl.hp.com> Message-ID: <3853.130.240.136.130.1153482978.squirrel@pinus.tt.luth.se> Owen Rees skrev: > See the thread "Popups popping through windows using built-in rootless WM" > which can be found in the archive starting at > . > > I suspect that this problem will require fairly deep understanding of how > Cygwin/X works, plus a fair bit of time to investigate it. According to the > Cygwin/X web site we still do not have a maintainer > so I don't expect to see progress on this bug soon. > Yes propably the same problem. -- Bengt-Arne Fjellner -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From quetschke@scytek.de Fri Jul 21 21:30:00 2006 From: quetschke@scytek.de (Volker Quetschke) Date: Fri, 21 Jul 2006 21:30:00 -0000 Subject: xmgrace fails to start In-Reply-To: <44BCEF84.2010207@scytek.de> References: <44BC9C4B.1020508@gamma-rs.ch> <44BCEF84.2010207@scytek.de> Message-ID: <44C1476A.5090707@scytek.de> Volker Quetschke wrote: > This is an X problem, redirecting to the correct ml. > > Charles L. Werner wrote: >> (snip) > Yes, reproducible. But not cygwin1.dll is the culprit but xorg > 6.8.99.901-1. > > I updated the cygwin installation to the latest and greatest except > the xorg packages and xmgrace still ran. > > After updating xorg-x11-* from 6.8.2.0-1 to 6.8.99.901-1 I get exactly > the behavior you describe. As Charles L. Werner wrote in a different thread even after downgrading X again to 6.8.2 the problem remains. :( And the "The NTVDM CPU has encountered an illegal instruction" or similar popup has nothing to do with symbolic links. Try this: $ cd /usr/grace/bin/ $ strace ./xmgrace.exe and you'll get a popup. I tried gdb, but: $ gdb ./xmgrace.exe GNU gdb 6.5.50.20060706-cvs (cygwin-special) (snip) This GDB was configured as "i686-pc-cygwin"...(no debugging symbols found) (gdb) run Starting program: /usr/grace/bin/xmgrace.exe Program received signal SIGSEGV, Segmentation fault. Error: dll starting at 0x771000 not found. Program received signal SIGSEGV, Segmentation fault. ---Type to continue, or q to quit--- Program received signal SIGSEGV, Segmentation fault. Program exited with code 030000000005. You can't do that without a process to debug. that doesn't help much either. Over the weekend I'll build a xmgrace version with debug information. Maybe that helps. Volker -- PGP/GPG key (ID: 0x9F8A785D) available from wwwkeys.de.pgp.net key-fingerprint 550D F17E B082 A3E9 F913 9E53 3D35 C9BA 9F8A 785D -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 254 bytes Desc: OpenPGP digital signature URL: From quetschke@scytek.de Fri Jul 21 23:12:00 2006 From: quetschke@scytek.de (Volker Quetschke) Date: Fri, 21 Jul 2006 23:12:00 -0000 Subject: xmgrace fails to start - solved In-Reply-To: <44C1476A.5090707@scytek.de> References: <44BC9C4B.1020508@gamma-rs.ch> <44BCEF84.2010207@scytek.de> <44C1476A.5090707@scytek.de> Message-ID: <44C15F50.6090205@scytek.de> ARGH!!! Volker Quetschke wrote: > Volker Quetschke wrote: > >> This is an X problem, redirecting to the correct ml. >> >> Charles L. Werner wrote: >> >>> (snip) >> >> Yes, reproducible. But not cygwin1.dll is the culprit but xorg >> 6.8.99.901-1. >> >> I updated the cygwin installation to the latest and greatest except >> the xorg packages and xmgrace still ran. >> >> After updating xorg-x11-* from 6.8.2.0-1 to 6.8.99.901-1 I get exactly >> the behavior you describe. > > As Charles L. Werner wrote in a different thread even after downgrading > X again to 6.8.2 the problem remains. :( Yes, because it was a rebase problem! After running rebaseall everything is fine again. Volker -- PGP/GPG key (ID: 0x9F8A785D) available from wwwkeys.de.pgp.net key-fingerprint 550D F17E B082 A3E9 F913 9E53 3D35 C9BA 9F8A 785D -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 254 bytes Desc: OpenPGP digital signature URL: From reservations@ambassadorwaikiki.com Sun Jul 23 09:20:00 2006 From: reservations@ambassadorwaikiki.com (reservations@ambassadorwaikiki.com) Date: Sun, 23 Jul 2006 09:20:00 -0000 Subject: Mahalo for your Request Message-ID: <200607230920.k6N9KRrt029048@ambassadorwaikiki.com> Aloha from the Ambassador Hotel of Waikiki! Thank you for your reservation request. We will contact you within 24 hours regarding your request. Should you have any questions, our Front Desk is always open. Call us anytime at 808-941-7777. Or call our Reservations Department toll-free at 800-923-2620 (from the U.S. & Canada ) during our business hours. We look forward to seeing you here! Mahalo, Ambassador Hotel Reservations Department Ambassador Hotel of Waikiki 2040 Kuhio Avenue, Honolulu, Hawaii 96815 Phone: (808) 941-7777 ?? Fax: (808) 951-3939 Call our reservations department toll free: (800) 923-2620 (from the U.S. & Canada) E-mail: reservations@ambassadorwaikiki.com -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From mam-cygxfr@mythi.cx Sun Jul 23 21:00:00 2006 From: mam-cygxfr@mythi.cx (Marco Amrein) Date: Sun, 23 Jul 2006 21:00:00 -0000 Subject: Bugreport: Swiss German Keylayout no more autodetected Message-ID: <44C3E386.2070505@mythi.cx> Hi Today I updated Cygwin again after quite a while and after starting the X Server I found out that due to some mayor update, autodetection of my keyboard layout fails. While in /tmp/XWin.log the follwing lines appear: (--) winConfigKeyboard - Layout: "00000807" (00000807) (--) Using preset keyboard for "German (Switzerland)" (807), type "4" I'm effectively off with a default US english keyboard. I guess it's because the name of the keyboard layouts changed in this new X.org based release of X, AFAIK in older XFree releases it was de_CH and fr_CH. From a newer Ubuntu related howto ( :-) ) I finally derived the command that makes my layout work if I put it into a suitable startup script: setxkbmap ch -model 105 #(for Swiss German) or setxkbmap ch -model 105 -variant fr #(for Swiss French) Though it works for me this way I'm pretty sure, I can help giving Cygwin a better X server by submitting this bug report as someone here knows how to fix the autodetection routines. best regards Marco -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From cstrauss@cea.inpe.br Mon Jul 24 00:45:00 2006 From: cstrauss@cea.inpe.br (Cesar Strauss) Date: Mon, 24 Jul 2006 00:45:00 -0000 Subject: gvim fontconfig issue from clean install In-Reply-To: <168519350606130209r16f03279gcffe02b26cde46c2@mail.gmail.com> References: <168519350606130209r16f03279gcffe02b26cde46c2@mail.gmail.com> Message-ID: simon godden wrote: > I installed cygwin from scratch and selected gvim. > > When I try to run it, I get the message: > > No fonts found; this probably means that the fontconfig > library is not correctly configured. You may need to > edit the fonts.conf configuration file. More information > about fontconfig can be found in the fontconfig(3) manual > page and on http://fontconfig.org > > Other basic x applications are working fine, as is emacs. > > Any ideas? > You are probably missing the scaleable fonts, which are not installed by default. Try installing the xorg-x11-fscl package. HTH, Cesar -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From rchan@nvidia.com Mon Jul 24 09:35:00 2006 From: rchan@nvidia.com (Ryan Chan) Date: Mon, 24 Jul 2006 09:35:00 -0000 Subject: X visual References: <40B5471A.6030506@ddd.co.jp> Message-ID: Hi Cedric, We would like to invite you to explore our job opportunities at Nvidia, pls email me rchan@nvidia.com for further discussion -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From cgf-no-personal-reply-please@cygwin.com Mon Jul 24 14:56:00 2006 From: cgf-no-personal-reply-please@cygwin.com (Christopher Faylor) Date: Mon, 24 Jul 2006 14:56:00 -0000 Subject: X visual In-Reply-To: References: <40B5471A.6030506@ddd.co.jp> Message-ID: <20060724145641.GE15537@trixie.casa.cgf.cx> On Mon, Jul 24, 2006 at 09:30:36AM +0000, Ryan Chan wrote: >Hi Cedric, > >We would like to invite you to explore our job opportunities at Nvidia, pls >email me rchan@nvidia.com for further discussion This is not a recruiting mailing list. Please do not send any further email here. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dirk.schleicher@gmx.de Mon Jul 24 17:25:00 2006 From: dirk.schleicher@gmx.de (Dirk Schleicher) Date: Mon, 24 Jul 2006 17:25:00 -0000 Subject: modification of startx.bat not work Message-ID: <20060724192515.5344e30a@omnibookxe4500> Hello, I try to modify the startx.bat. I remove %RUN% xterm -e /usr/bin/bash -l and put %RUN% sylpheed-claws in. Now I was able to start SC by a window icon. But in this way I am not able to get my mails because there is no connection or let me say network. Thanks and best regards Dirk -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From cgf-no-personal-reply-please@cygwin.com Mon Jul 24 18:57:00 2006 From: cgf-no-personal-reply-please@cygwin.com (Christopher Faylor) Date: Mon, 24 Jul 2006 18:57:00 -0000 Subject: modification of startx.bat not work In-Reply-To: <20060724192515.5344e30a@omnibookxe4500> References: <20060724192515.5344e30a@omnibookxe4500> Message-ID: <20060724185746.GB21744@trixie.casa.cgf.cx> On Mon, Jul 24, 2006 at 07:25:15PM +0200, Dirk Schleicher wrote: >Hello, > > >I try to modify the startx.bat. >I remove >%RUN% xterm -e /usr/bin/bash -l >and put >%RUN% sylpheed-claws >in. > >Now I was able to start SC by a window icon. But in this way I am not >able to get my mails because there is no connection or let me say >network. Why not just have one icon which is the unmodified startx.bat and one icon which runs sylpheed-claws -display :0 ? You could double click on the sylpheed-claws icon after X had been started. cgf -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dirk.schleicher@gmx.de Mon Jul 24 19:49:00 2006 From: dirk.schleicher@gmx.de (Dirk Schleicher) Date: Mon, 24 Jul 2006 19:49:00 -0000 Subject: modification of startx.bat not work In-Reply-To: <20060724185746.GB21744@trixie.casa.cgf.cx> References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> Message-ID: <20060724214917.164085c0@omnibookxe4500> Am Mon, 24 Jul 2006 14:57:46 -0400 schrieb Christopher Faylor : > You could double click on the sylpheed-claws icon after X had been > started. Hello, I like to have no terminal open. I like to start SC without terminal. Only SC Dirk -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From knellis@syntek-usa.com Mon Jul 24 19:52:00 2006 From: knellis@syntek-usa.com (Kenneth Nellis) Date: Mon, 24 Jul 2006 19:52:00 -0000 Subject: XWin -silent-dup-error not so silent Message-ID: <000301c6af5a$6536de90$be32000a@idirect.net> I find it convenient to have a single icon in my Windows task bar that, when clicked, opens an xterm window without me having to know or care about whether or not Xserver is already running. My icon is associated with Cygwin's X11's standard startxwin.bat script that essentially runs the following two commands (edited here for clarity): \cygwin\bin\run XWin -multiwindow -clipboard -silent-dup-error \cygwin\bin\run xterm -e /usr/bin/bash -l This script is designed to do what I want: The first command starts Xserver, which is smart enough to detect whether another instance is running and to die if it is. Its (undocumented) -silent-dup-error switch, no doubt, is supposed to cause Xserver to be silent about dying, which is what you want for this scenario. The second command, then, starts xterm in the presence of a single Xserver. This script has worked fine until I upgraded Xserver from 6.8.2.0-4 to 6.8.99.901-1. Now Xserver is rather unsilent in the presence of another instance, displaying a Windows alert box ("A fatal error has occurred and Cygwin/X will now exit..."; see attached) and creating a /tmp/XWin.log file. I was hoping to learn whether this behavior is considered a bug or not and, if it is, whether it's under consideration for a fix. BTW, this change was mentioned in two previous posts--by Chuck on 7/12 ("Xwin.log error") and by me on 7/17 ("fatal error with X Server 6.8.99.901-1")--but neither post illicited a satisfactory response. Please forgive me for making one additional attempt. --Ken Nellis Attached: cygcheck.out, XWinAlert.bmp -------------- next part -------------- A non-text attachment was scrubbed... Name: cygcheck.out Type: application/octet-stream Size: 29266 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: XWinAlert.bmp Type: image/bmp Size: 232422 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From cgf-no-personal-reply-please@cygwin.com Mon Jul 24 19:55:00 2006 From: cgf-no-personal-reply-please@cygwin.com (Christopher Faylor) Date: Mon, 24 Jul 2006 19:55:00 -0000 Subject: modification of startx.bat not work In-Reply-To: <20060724214917.164085c0@omnibookxe4500> References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> Message-ID: <20060724195510.GA23671@trixie.casa.cgf.cx> On Mon, Jul 24, 2006 at 09:49:17PM +0200, Dirk Schleicher wrote: >Am Mon, 24 Jul 2006 14:57:46 -0400 >schrieb Christopher Faylor : >>You could double click on the sylpheed-claws icon after X had been >>started. > >Hello, > >I like to have no terminal open. I like to start SC without terminal. >Only SC I guess I don't understand what you're trying to do then. Sorry. cgf -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dirk.schleicher@gmx.de Tue Jul 25 06:22:00 2006 From: dirk.schleicher@gmx.de (Dirk Schleicher) Date: Tue, 25 Jul 2006 06:22:00 -0000 Subject: modification of startx.bat not work In-Reply-To: <20060724195510.GA23671@trixie.casa.cgf.cx> References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> Message-ID: <20060725082210.52c94fff@omnibookxe4500> Am Mon, 24 Jul 2006 15:55:10 -0400 schrieb Christopher Faylor : > I guess I don't understand what you're trying to do then. Sorry. Hi, let me try to explain it once more. At the moment I start cygwin by startx.bat. Then I have a open xterm "window" where I start SC. This means that I have two "icons" or two programs (SC and Xterm) in the taskbar (hope taskbar is the right word) of my W2k. If I close the Xterm SC will be closed too. What I try to get is one script where I can start a Xserver without any bash "window" and SC. More to explain I am not able with my English. Thanks for your help Best Regards Dirk -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Tue Jul 25 08:17:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Tue, 25 Jul 2006 08:17:00 -0000 Subject: modification of startx.bat not work In-Reply-To: <20060725082210.52c94fff@omnibookxe4500> References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> <20060725082210.52c94fff@omnibookxe4500> Message-ID: Dirk Schleicher wrote: [snip] > let me try to explain it once more. At the moment I start cygwin by > startx.bat. Then I have a open xterm "window" where I start SC. > This means that I have two "icons" or two programs (SC and Xterm) in the > taskbar (hope taskbar is the right word) of my W2k. If I close the > Xterm SC will be closed too. Correct, the way XWin is started using startxwin.bat does make the whole server execution depend on the xterm, so when the xterm is closed XWin terminates. That can be changed easily by using startx (instead of startxwin.bat) and creating a file in your home directory named .xsession like this: #!/bin/sh # # FILE: $HOME/.xsession # exec SylpheedClaws /usr/bin/sylpheed-claws & scpid=$! # Now wait for program to terminate wait $scpid exit 0 You can also do the same at the end of your .xinitrc (that's what I use); in that case you don't even need the wait, when SC terminates XWin terminates. The reason I use startx is because it doesn't open an xterm, but if you copied the global xinitrc (in /etc/X11/xinit/xinitrc) to your home .xinitrc it also has execute xterm at the end... you'll have to comment that one too. > What I try to get is one script where I can start a Xserver without > any bash "window" and SC. > > More to explain I am not able with my English. Your original post says that you had a network problem, can you show the actual message? -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From sofa77@gmx.de Tue Jul 25 08:40:00 2006 From: sofa77@gmx.de (andi b) Date: Tue, 25 Jul 2006 08:40:00 -0000 Subject: Xwin.log error References: <20060712220322.77582.qmail@web30210.mail.mud.yahoo.com> Message-ID: hey chuck, > I'll give that a try but I am still wondering what changed. XWin.exe > used to be able to determine that another instance was running and just > quietly exit. i had the same problem as you and i totally understand why toi run the .bat file each because there are lots of conf settings i would not try to pack in the xterm-link. since i also found no solution for that problem with version 6.?.99, i just downgraded to my previous version 6.?.2. you can do this by running setup and click on the 'Keep' word until there appears version 6.?.2. best, andi -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dirk.schleicher@gmx.de Tue Jul 25 08:48:00 2006 From: dirk.schleicher@gmx.de (Dirk Schleicher) Date: Tue, 25 Jul 2006 08:48:00 -0000 Subject: modification of startx.bat not work In-Reply-To: References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> <20060725082210.52c94fff@omnibookxe4500> Message-ID: <20060725104804.4a527011@omnibookxe4500> Am Tue, 25 Jul 2006 03:16:51 -0500 schrieb Ren? Berber : [snip] > Correct, the way XWin is started using startxwin.bat does make the > whole server execution depend on the xterm, so when the xterm is > closed XWin terminates. > > That can be changed easily by using startx (instead of startxwin.bat) > and creating a file in your home directory named .xsession like this: > > #!/bin/sh > # > # FILE: $HOME/.xsession > > # exec SylpheedClaws > > /usr/bin/sylpheed-claws & scpid=$! > > # Now wait for program to terminate > > wait $scpid > exit 0 I try it. The only thing is that if SC is close the Xserver close too. > > What I try to get is one script where I can start a Xserver without > > any bash "window" and SC. Again to start this I have to start a cygwin bash shell. I like to start SC without a shell > Your original post says that you had a network problem, can you show > the actual message? no connection with POP3-Server: pop.gmx.de:110 It is not possible to start a xsever without having a shell window and to start SC? I was thinking that this is easy... Thanks for help Dirk -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From caucasatron@yahoo.ca Tue Jul 25 14:14:00 2006 From: caucasatron@yahoo.ca (Steve Freeland) Date: Tue, 25 Jul 2006 14:14:00 -0000 Subject: Problem with starting X server (alternate solution) Message-ID: <20060725141355.69005.qmail@web34203.mail.mud.yahoo.com> Apologies for not attaching this to the correct thread; I'm not subscribed to the list and don't really know how I should go about that. But anyways. Regarding the "Could not open default font 'fixed'" message: Stephen A. Goulet mentioned that he was able to fix the problem by following the instructions in the FAQ, substituting /usr for the non-existant /usr/X11R6/lib/X11 mount point. Mariusz Janczak then replied that he didn't have a /usr mount point either. I was in the same situation. The solution I found was to just umount *everything*: First /usr/lib, then /, and /usr/bin last because that's where the umount exe is located. *Then* reinstall the font packages. That fixed it for me. I suspect I only really needed to umount /, but I haven't tested that hypothesis. I'd sure like to know what the underlying problem is, though, it seems odd for this issue to appear out of nowhere in a working system. - Steve -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Tue Jul 25 15:05:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Tue, 25 Jul 2006 15:05:00 -0000 Subject: Problem with starting X server (alternate solution) In-Reply-To: <20060725141355.69005.qmail@web34203.mail.mud.yahoo.com> References: <20060725141355.69005.qmail@web34203.mail.mud.yahoo.com> Message-ID: <44C63342.8000508@cygwin.com> Steve Freeland wrote: > Apologies for not attaching this to the correct thread; I'm not subscribed > to the list and don't really know how I should go about that. But anyways. > > > Regarding the "Could not open default font 'fixed'" message: Stephen A. > Goulet mentioned that he was able to fix the problem by following the > instructions in the FAQ, substituting /usr for the non-existant > /usr/X11R6/lib/X11 mount point. Mariusz Janczak then replied that he > didn't have a /usr mount point either. I was in the same situation. > > The solution I found was to just umount *everything*: First /usr/lib, then > /, and /usr/bin last because that's where the umount exe is located. > *Then* reinstall the font packages. That fixed it for me. I suspect I > only really needed to umount /, but I haven't tested that hypothesis. > > I'd sure like to know what the underlying problem is, though, it seems odd > for this issue to appear out of nowhere in a working system. You really need to subscribe to the list or keep an eye on it if you have problems. There's lots of information, current and historical, that you can get from it which can help you but won't come to your email box without your request. Case in point, you would know what the underlying problem was if you had been following at least this thread. It's spelled out here: You can't rely on someone else providing this insight to you personally. If you're not on the list and/or don't read it, you will miss out on answers to allot of your questions (even to some you haven't yet formulated yourself). -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From amiller@connext.net Tue Jul 25 16:18:00 2006 From: amiller@connext.net (Aaron Miller) Date: Tue, 25 Jul 2006 16:18:00 -0000 Subject: 1.5.21-1(?): XWin.exe runs at 50-100% processor usage Message-ID: <44C644A6.5020407@connext.net> Hi. I don't know whether I've found a bug or whether there's some conflict between XWin and some other package I have installed or what, and my skill at programming doesn't extend as far as figuring it out for myself, so I'm asking. Please slap my hands if I'm being an idiot. I hadn't updated my cygwin installation for a while, so when I installed some random package (syslog-ng 1.6.11-1 or so, IIRC), setup took the opportunity to download and install all the newest fun, including the latest versions of the various installed xorg packages. Other than the cygwin update, nothing has recently changed on the machine. After the restart, I noticed that XWin.exe was using a surprisingly high percentage of my processor: instead of the '00' percentage usually reported in Windows task manager when I'm not doing anything involving X, it ran at about 93%, and continued to do so for several minutes -- I gave it plenty of time to initialize and settle down, and it didn't settle down. My system is configured to start c:\cygwin\X11R6\bin\startxwin.bat at login time, so I popped into a command shell, went there, and tried running the batch file by hand, with the same high-processor-usage result. I killed that and looked into the batch file; the command it uses to start XWin.exe is %RUN% XWin -multiwindow -silent-dup-error -clipboard, which I tried by hand. Doing it that way yielded an XWin instance which ran at only about 46-48% sustained processor usage. I have no idea how to interpret strace output, especially when it's just dumping everything it can to the terminal. Nonetheless, I tried 'strace XWin -multiwindow -silent-dup-error -clipboard', just to see. Some XWin instances I start this way behave normally, at least in terms of processor usage; others go right up to 46-48% or 90-93% and stay there. xterm won't start under any XWin that's run by strace. For whatever it's worth, the strace output shows a lot of this: --- Process 1080, exception C0000005 at 610B41FB 2324 181975455 [main] XWin 1080 _cygtls::handle_exceptions: In cygwin_except_handler exc 0xC0000005 at 0x610B41FB sp 0x228400 --- Process 1080, exception C0000005 at 610AC3FA 2405 181980399 [main] XWin 1080 _cygtls::handle_exceptions: In cygwin_except_handler exc 0xC0000005 at 0x610AC3FA sp 0x2283F0 These two exception reports repeat at a rate too high for me to eyeball, but which appears to be at least a hundred or so per second -- I'll happily provide strace output on request, as well as anything else that'll help. Unfortunately, I'm not sure what to do to reproduce this problem; I have no difficulty doing so on my machine, of course, but without updating my other Cygwin installs, which I'm understandably not sprinting to do, I have no way of knowing whether this problem will occur anywhere else. The best clue I've got for a test case is to download and install the latest xorg packages, try starting XWin, and see what happens. I've STFW, with little result; I found a thread from May regarding what looked like it might be a similar problem ('XWin 100% CPU Usage (Remote Desktop)'). In that thread, Larry Hall suggested trying the latest cygwin-1.dll snapshot. I haven't tried that yet; it's possible it might help, but I tend slightly to doubt it, as nothing else which uses cygwin-1.dll is giving me any trouble. If someone with a clue tells me to try it, I'll try it; until then I'd rather leave well enough alone. Please find attached output of cygcheck -s -v -r from the machine that's having the trouble. Apologies for the slight disjointedness of my report, too; if there's any other information which might be of use, please let me know, and I'll provide it. Thank you for your time and attention. -- Aaron -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: cygcheck.out URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Tue Jul 25 18:28:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Tue, 25 Jul 2006 18:28:00 -0000 Subject: modification of startx.bat not work In-Reply-To: <20060725104804.4a527011@omnibookxe4500> References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> <20060725082210.52c94fff@omnibookxe4500> <20060725104804.4a527011@omnibookxe4500> Message-ID: Dirk Schleicher wrote: [snip] > I try it. The only thing is that if SC is close the Xserver close too. Yes, that's the way it works. I mean, that's the way that the steps I showed work. [snip] > Again to start this I have to start a cygwin bash shell. I like to > start SC without a shell You mean "start SC using an icon"? like an icon to the bat file you showed... because startx is a shell script (just like startxwin.bat is a command.com script) and it does more than just start XWin. You probably can just run a Windows shortcut to XWin with all the parameters, and use .xinitrc or .xsession to start up SC. If you want XWin to stay after SC is closed then just change the "wait $scpid" with "sleep 1d" or something similar. >> Your original post says that you had a network problem, can you show >> the actual message? > > no connection with POP3-Server: pop.gmx.de:110 That error has nothing to do with XWindows. So, SC was running with your modified .bat file, it just could not connect to that pop server; try regular network troubleshooting, like "ping pop.gmx.de" if that server responds to ping, traceroute, etc. > It is not possible to start a xsever without having a shell window and > to start SC? > I was thinking that this is easy... It probably is, I just don't use it that way, but what you describe seems possible with CygwinX. -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Wed Jul 26 01:05:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Wed, 26 Jul 2006 01:05:00 -0000 Subject: modification of startx.bat not work In-Reply-To: References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> <20060725082210.52c94fff@omnibookxe4500> <20060725104804.4a527011@omnibookxe4500> Message-ID: Ren? Berber wrote: [snip] > You probably can just run a Windows shortcut to XWin with all the parameters, > and use .xinitrc or .xsession to start up SC. [snip] I made a little experiment and the above sentence is not true: if I start XWindows from an icon/shortcut (using "C:\cygwin\bin\run.exe -p /usr/X11R6/bin XWin -multiwindow -clipboard -silent-dup-error -dpi 100") XWin starts fine but my .xinitrc (and .xsession) is not used... XWin does not know what user started it. So to run the application I would also need an icon/shortcut for the application. -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From M.Janczak@adbglobal.com Wed Jul 26 07:10:00 2006 From: M.Janczak@adbglobal.com (Mariusz Janczak) Date: Wed, 26 Jul 2006 07:10:00 -0000 Subject: Problem with starting X server (alternate solution) References: <20060725141355.69005.qmail@web34203.mail.mud.yahoo.com> Message-ID: I followed your steps I found that this solution doesn't work for me. I also tried to reinstall whole cygwin packege and also without effect. The only one solution that works for me is install previous version of X package. -- Mariusz Janczak "Steve Freeland" wrote in message news:20060725141355.69005.qmail@web34203.mail.mud.yahoo.com... > Apologies for not attaching this to the correct thread; I'm not subscribed > to the list and don't really know how I should go about that. But > anyways. > > Regarding the "Could not open default font 'fixed'" message: Stephen A. > Goulet mentioned that he was able to fix the problem by following the > instructions in the FAQ, substituting /usr for the non-existant > /usr/X11R6/lib/X11 mount point. Mariusz Janczak then replied that he > didn't have a /usr mount point either. I was in the same situation. > > The solution I found was to just umount *everything*: First /usr/lib, then > /, and /usr/bin last because that's where the umount exe is located. > *Then* reinstall the font packages. That fixed it for me. I suspect I > only really needed to umount /, but I haven't tested that hypothesis. > > I'd sure like to know what the underlying problem is, though, it seems odd > for this issue to appear out of nowhere in a working system. > > - Steve > > > > > -- > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > Problem reports: http://cygwin.com/problems.html > Documentation: http://x.cygwin.com/docs/ > FAQ: http://x.cygwin.com/docs/faq/ > > -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dirk.schleicher@gmx.de Wed Jul 26 07:16:00 2006 From: dirk.schleicher@gmx.de (Dirk Schleicher) Date: Wed, 26 Jul 2006 07:16:00 -0000 Subject: modification of startx.bat not work In-Reply-To: References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> <20060725082210.52c94fff@omnibookxe4500> <20060725104804.4a527011@omnibookxe4500> Message-ID: <20060726091550.3eabed0f@omnibookxe4500> Am Tue, 25 Jul 2006 13:27:14 -0500 schrieb Ren? Berber : [snip] > >> Your original post says that you had a network problem, can you > >> show the actual message? > > > > no connection with POP3-Server: pop.gmx.de:110 > > That error has nothing to do with XWindows. So, SC was running with > your modified .bat file, it just could not connect to that pop > server; try regular network troubleshooting, like "ping pop.gmx.de" > if that server responds to ping, traceroute, etc. If I start SC with the modified startx.bat there is no network. It seams that this "%RUN% xterm -e /usr/bin/bash -l" and then call SC make the network working. It is not easy to explain it in German but in English... This what you wrote "pintg etc." is not possible to test because there is no bash. If I start a new bash ping and all work but not SC. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dirk.schleicher@gmx.de Wed Jul 26 08:10:00 2006 From: dirk.schleicher@gmx.de (Dirk Schleicher) Date: Wed, 26 Jul 2006 08:10:00 -0000 Subject: modification of startx.bat not work In-Reply-To: References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> <20060725082210.52c94fff@omnibookxe4500> <20060725104804.4a527011@omnibookxe4500> Message-ID: <20060726101027.77e5dd24@omnibookxe4500> Am Tue, 25 Jul 2006 20:04:53 -0500 schrieb Ren? Berber : > Ren? Berber wrote: > [snip] > > You probably can just run a Windows shortcut to XWin with all the > > parameters, and use .xinitrc or .xsession to start up SC. > [snip] > > I made a little experiment and the above sentence is not true: if I > start XWindows from an icon/shortcut (using "C:\cygwin\bin\run.exe > -p /usr/X11R6/bin XWin -multiwindow -clipboard -silent-dup-error -dpi > 100") XWin starts fine but my .xinitrc (and .xsession) is not used... > XWin does not know what user started it. > > So to run the application I would also need an icon/shortcut for the > application. I found out that the .xinitrc parameters are used with startx. I start the normal bash and type in startx. This start Xserver and SC. And SC works fine. C:\cygwin\bin\run.exe -p /usr/X11R6/bin/ startx -display 127.0.0.1:0.0 do not work because startx is a script not an .exe C:\cygwin\bin\run.exe -p /usr/local/bin/ sylpheed-claws.exe -display 127.0.0.1:0.0 start SC for a second. I can see this in the task-manager. I think it is not possible to start SC from one icon without typing something Dirk -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dirk.schleicher@gmx.de Wed Jul 26 08:28:00 2006 From: dirk.schleicher@gmx.de (Dirk Schleicher) Date: Wed, 26 Jul 2006 08:28:00 -0000 Subject: modification of startx.bat not work In-Reply-To: <20060726101027.77e5dd24@omnibookxe4500> References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> <20060725082210.52c94fff@omnibookxe4500> <20060725104804.4a527011@omnibookxe4500> <20060726101027.77e5dd24@omnibookxe4500> Message-ID: <20060726102825.6fe801b0@omnibookxe4500> Am Wed, 26 Jul 2006 10:10:27 +0200 schrieb Dirk Schleicher : > I think it is not possible to start SC from one icon without typing > something It work. I copy startx.bat to sc.bat and modify it " %RUN% XWin -multiwindow -clipboard -silent-dup-error REM Startup an xterm, using bash as the shell. rem %RUN% xterm -e /usr/bin/bash -l %RUN% C:\cygwin\usr\local\bin\sylpheed-claws.exe " then I make an icon with a link C:\cygwin\bin\run.exe -p /usr/X11R6/bin sc.bat and it works. Thanks for the help Dirk -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Wed Jul 26 08:29:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Wed, 26 Jul 2006 08:29:00 -0000 Subject: modification of startx.bat not work In-Reply-To: <20060726101027.77e5dd24@omnibookxe4500> References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> <20060725082210.52c94fff@omnibookxe4500> <20060725104804.4a527011@omnibookxe4500> <20060726101027.77e5dd24@omnibookxe4500> Message-ID: Dirk Schleicher wrote: [snip] >> So to run the application I would also need an icon/shortcut for the >> application. > > I found out that the .xinitrc parameters are used with startx. I start > the normal bash and type in startx. This start Xserver and SC. And SC > works fine. Yes that's what I meant in my message. XWin seems to get the user's home directory (perhaps only the user name) from the shell environment, so it can run the user's .xinitrc . An option that I have not tested is to change the global xinitrc and see if that works. Of course being the global one means that all users on that computer will get the same application, but if you are the only user of X then that's no problem. The global script is in /etc/X11/xinit/xinitrc . > C:\cygwin\bin\run.exe -p /usr/X11R6/bin/ startx -display 127.0.0.1:0.0 > do not work because startx is a script not an .exe Yeah, I tried that too. > C:\cygwin\bin\run.exe -p /usr/local/bin/ sylpheed-claws.exe -display > 127.0.0.1:0.0 start SC for a second. I can see this in the > task-manager. The message must be: "no DISPLAY found" since X windows is not running and by default all applications try display :0.0 . > I think it is not possible to start SC from one icon without typing > something Like I said: it can be done with 2 icons, one to start X and another to start SC. In fact you can start all the X applications you want after starting X. Now for the network problem, that is really strange, I saw your other message and understand that you can't troubleshoot the network. I really was thinking of troubleshooting in the regular way, on a terminal window, but if only SC has problems then perhaps is a timeout or some option that can be set inside SC. -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dirk.schleicher@gmx.de Wed Jul 26 09:04:00 2006 From: dirk.schleicher@gmx.de (Dirk Schleicher) Date: Wed, 26 Jul 2006 09:04:00 -0000 Subject: modification of startx.bat not work In-Reply-To: References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> <20060725082210.52c94fff@omnibookxe4500> <20060725104804.4a527011@omnibookxe4500> <20060726101027.77e5dd24@omnibookxe4500> Message-ID: <20060726110437.0277b98e@omnibookxe4500> Am Wed, 26 Jul 2006 03:28:43 -0500 schrieb Ren? Berber : > Now for the network problem, that is really strange, I saw your other > message and understand that you can't troubleshoot the network. I > really was thinking of troubleshooting in the regular way, on a > terminal window, but if only SC has problems then perhaps is a > timeout or some option that can be set inside SC. I found it. If you have a Window icon with link in property there are two "lines" Line on "Target" C:\cygwin\bin\run.exe -p /usr/X11R6/bin sc.bat Line two "execute in" C:\cygwin\bin (sorry I can not describe it better) If line two the path show where SC is it dit not work with path to C:\cygwin\bin\ SC work -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Phil.Betts@heis.co.uk Wed Jul 26 11:16:00 2006 From: Phil.Betts@heis.co.uk (Phil Betts) Date: Wed, 26 Jul 2006 11:16:00 -0000 Subject: modification of startx.bat not work Message-ID: Dirk Schleicher wrote on Tuesday, July 25, 2006 9:48 AM:: > Am Tue, 25 Jul 2006 03:16:51 -0500 > schrieb Ren? Berber : > > [snip] >> Correct, the way XWin is started using startxwin.bat does make the >> whole server execution depend on the xterm, so when the xterm is >> closed XWin terminates. This is not true. It's startx (or rather, xinit) that closes the server on exit. You can safely remove the xterm line from startxwin.bat (or startxwin.sh) and the server just keeps going. >> That can be changed easily by using startx (instead of startxwin.bat) >> and creating a file in your home directory named .xsession like this: >> >> #!/bin/sh >> # >> # FILE: $HOME/.xsession >> >> # exec SylpheedClaws >> >> /usr/bin/sylpheed-claws & scpid=$! >> >> # Now wait for program to terminate >> >> wait $scpid >> exit 0 > > I try it. The only thing is that if SC is close the Xserver close too. That's to be expected. >>> What I try to get is one script where I can start a Xserver without >>> any bash "window" and SC. > > Again to start this I have to start a cygwin bash shell. I like to > start SC without a shell Your problem is that you're using xinit via startx. The last command executed is intended to be a window manager. It is designed so that when the window manager dies, X is shut down. This is (usually) what one wants. Unfortunately for users of startx, XWin by default uses its built-in window manager, so in order to keep X alive some other process must be started. An xterm was chosen IIRC because most users will want a shell at some point in their session. If you use startxwin.* to start X instead, you'll find it doesn't require any process to hang around. The distributed files start an xterm, but you can safely remove that line. Please don't be tempted to try hacking startxwin.* to start sylpheed. It's bad practice to use a server initialisation script to start client programs. I would guess that at least half of the "fault reports" on this list are from people who try to use startx* to run xterm, then complain that they get a duplicate invocation error. It's much better to use startxwin.bat to start XWin once (you can put a shortcut to startxwin.bat in your Windows startup folder), then have a shortcut to start your client programs such as sylpheed. If you want to start sylpheed without explicitly starting XWin, you can write a small script to use checkx to see if the server is running and if it isn't, start it. E.g. --------------- /tmp/xdemo.sh ----------------- #!/bin/bash export DISPLAY=:0 /usr/bin/checkx || /usr/X11R6/bin/startxwin.sh exec /usr/X11R6/bin/xeyes ---------------------------------------------- You can then run this script from a shortcut where the target is: C:\cygwin\bin\run.exe /bin/bash -c /tmp/xdemo.sh You would need to remove the line from startxwin.sh that starts xterm, which means you should really use a copy of it, otherwise the next time you update X, you'd be likely to lose your change. HTH Phil -- ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the H.E Information Systems Ltd. Tel: 0161 866 9066 Web: www.heis.co.uk This footnote also confirms that this email message has been swept by MIMEsweeper for the presence of computer viruses. www.clearswift.com ********************************************************************** -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pechtcha@cs.nyu.edu Thu Jul 27 01:40:00 2006 From: pechtcha@cs.nyu.edu (Igor Peshansky) Date: Thu, 27 Jul 2006 01:40:00 -0000 Subject: modification of startx.bat not work In-Reply-To: <20060726101027.77e5dd24@omnibookxe4500> References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> <20060725082210.52c94fff@omnibookxe4500> <20060725104804.4a527011@omnibookxe4500> <20060726101027.77e5dd24@omnibookxe4500> Message-ID: I know this is a fixed issue, but some comments below nonetheless, to tie up loose ends. On Wed, 26 Jul 2006, Dirk Schleicher wrote: > Am Tue, 25 Jul 2006 20:04:53 -0500 > schrieb Ren?? Berber : . Thanks. > > Ren?? Berber wrote: > > [snip] > > > You probably can just run a Windows shortcut to XWin with all the > > > parameters, and use .xinitrc or .xsession to start up SC. > > [snip] > > > > I made a little experiment and the above sentence is not true: if I > > start XWindows from an icon/shortcut (using "C:\cygwin\bin\run.exe > > -p /usr/X11R6/bin XWin -multiwindow -clipboard -silent-dup-error -dpi > > 100") XWin starts fine but my .xinitrc (and .xsession) is not used... > > XWin does not know what user started it. Naturally -- .xinitrc and .xsession are artifacts of xinit (and startx), not XWin. > > So to run the application I would also need an icon/shortcut for the > > application. > > I found out that the .xinitrc parameters are used with startx. I start > the normal bash and type in startx. This start Xserver and SC. And SC > works fine. > C:\cygwin\bin\run.exe -p /usr/X11R6/bin/ startx -display 127.0.0.1:0.0 > do not work because startx is a script not an .exe Right, but C:\cygwin\bin\run.exe -p /usr/X11R6/bin/ bash --login -c startx -display 127.0.0.1:0.0 will, because bash will know how to interpret the shebang (#!) in startx and invoke the script appropriately. People often overlook this solution and declare that it's impossible to start a script from a shortcut. Or you could've used xinit, which *is* a .exe. HTH, Igor -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From siegfried@heintze.com Thu Jul 27 04:26:00 2006 From: siegfried@heintze.com (siegfried) Date: Thu, 27 Jul 2006 04:26:00 -0000 Subject: XWindows version of Java? In-Reply-To: <61f6f4390606290731w6e3478f8rd9370c8807e2ea40@mail.gmail.com> Message-ID: I notice the cygwin version of emacs runs in XWindows and is one of the few XWindows programs I run frequently on windows. I assume (I have not tried it yet) I can run the cygwin version of emacs on my home windows machine from a remote machine with the xhost and "ssh -X" commands. Is this correct? Sun's javaw runs native windows, not xwindows. Is there a way I can run GUI java programs on windows using xwindows so they are compatible with xhost and "ssh -X"? I've been reading about gcj and that might work but it looks like I'd have to recompile everything myself. I want to run eclipse on windows from a remote machine and I see in fedora core 4 they have recompiled eclipse with gcj. But I was hoping I would not have to recompile eclipse from the source. Does cygwin have a javax program that runs GUI java programs under xwindows? Thanks, Siegfried -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Admin@hexabyte.tn Thu Jul 27 09:16:00 2006 From: Admin@hexabyte.tn (Admin@hexabyte.tn) Date: Thu, 27 Jul 2006 09:16:00 -0000 Subject: Virus intercepted Message-ID: <200607270916.k6R9G19V010131@hexabyte.tn> Cher client, Notre filtre antiviral a decouvert que cet email contient le virus [Worm.Mydoom.M] _______________________________________________________________________ [Received: by tounes-21 with ESMTP id k6R9G06I007013 for ; Thu, 27 Jul 2006 11:16:00 +0200 Received: from cygwin.com ([220.94.238.83]) by telecom (8.12.9/8.12.9) with ESMTP id k6R95Fec005651 for ; Thu, 27 Jul 2006 10:05:18 +0100 (CET) Message-Id: <200607270905.k6R95Fec005651@telecom> From: cygwin-xfree@cygwin.com To: itechtunisia@hexabyte.tn Subject: Delivery reports about your e-mail Date: Thu, 27 Jul 2006 18:15:44 +0900 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0006_0C0574EF.2F2082D8" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 ] _______________________________________________________________________ Afin de proteger votre ordinateur, le message a ete efface. Vous pouvez contacter notre service Hotline au 71 28 07 30 pour tout complement d'information. Cordialement.???? Hexabyte Internet Group | www.hexabyte.tn 11, rue du Niger, Centre Hanen, Bloc A, Appartement 1, 1002 Tunis Tel : 71-288682 71-286988 71-280730 78-456666 Fax : 71-287754 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dirk.schleicher@gmx.de Thu Jul 27 17:09:00 2006 From: dirk.schleicher@gmx.de (Dirk Schleicher) Date: Thu, 27 Jul 2006 17:09:00 -0000 Subject: modification of startx.bat not work In-Reply-To: References: <20060724192515.5344e30a@omnibookxe4500> <20060724185746.GB21744@trixie.casa.cgf.cx> <20060724214917.164085c0@omnibookxe4500> <20060724195510.GA23671@trixie.casa.cgf.cx> <20060725082210.52c94fff@omnibookxe4500> <20060725104804.4a527011@omnibookxe4500> <20060726101027.77e5dd24@omnibookxe4500> Message-ID: <20060727190947.2d62eda0@omnibookxe4500> Am Wed, 26 Jul 2006 21:40:51 -0400 (EDT) schrieb Igor Peshansky: > On Wed, 26 Jul 2006, Dirk Schleicher wrote: > > > Am Tue, 25 Jul 2006 20:04:53 -0500 > > schrieb Ren? Berber : > > . Thanks. Sorry, I didn't saw it. Hope its better now. Thanks for the rest. Dirk -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Thu Jul 27 18:54:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Thu, 27 Jul 2006 18:54:00 -0000 Subject: XWindows version of Java? In-Reply-To: <200607270426.k6R4Q6x0006780@mail.prospeed.net> References: <200607270426.k6R4Q6x0006780@mail.prospeed.net> Message-ID: <44C90BC1.1070006@cygwin.com> siegfried wrote: > I notice the cygwin version of emacs runs in XWindows and is one of the few > XWindows programs I run frequently on windows. > > I assume (I have not tried it yet) I can run the cygwin version of emacs on > my home windows machine from a remote machine with the xhost and "ssh -X" > commands. Is this correct? Should be. I haven't tried it either. Give it a shot if you're interested. > Sun's javaw runs native windows, not xwindows. Is there a way I can run GUI > java programs on windows using xwindows so they are compatible with xhost > and "ssh -X"? Not without a java built to use Cygwin-X, no. > I've been reading about gcj and that might work but it looks like I'd have > to recompile everything myself. I want to run eclipse on windows from a > remote machine and I see in fedora core 4 they have recompiled eclipse with > gcj. But I was hoping I would not have to recompile eclipse from the source. > > Does cygwin have a javax program that runs GUI java programs under xwindows? Generic answer: Specific answer: -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From kevin.benton@amd.com Thu Jul 27 20:18:00 2006 From: kevin.benton@amd.com (Benton, Kevin) Date: Thu, 27 Jul 2006 20:18:00 -0000 Subject: XWindows version of Java? Message-ID: Remote X-Windows from Cygwin apps has worked fine for me including Emacs. I haven't tried it with javaw, but I don't see any reason why it shouldn't. --- Kevin Benton Perl/Bugzilla Developer/Administrator, Perforce SCM Administrator AMD - ECSD Software Validation and Tools The opinions stated in this communication do not necessarily reflect the view of Advanced Micro Devices and have not been reviewed by management. This communication may contain sensitive and/or confidential and/or proprietary information. Distribution of such information is strictly prohibited without prior consent of Advanced Micro Devices. This communication is for the intended recipient(s) only. If you have received this communication in error, please notify the sender, then destroy any remaining copies of this communication. > -----Original Message----- > From: cygwin-xfree-owner@cygwin.com [mailto:cygwin-xfree-owner@cygwin.com] > On Behalf Of Larry Hall (Cygwin X) > Sent: Thursday, July 27, 2006 12:54 PM > To: cygwin-xfree@cygwin.com > Subject: Re: XWindows version of Java? > > siegfried wrote: > > I notice the cygwin version of emacs runs in XWindows and is one of the > few > > XWindows programs I run frequently on windows. > > > > I assume (I have not tried it yet) I can run the cygwin version of emacs > on > > my home windows machine from a remote machine with the xhost and "ssh - > X" > > commands. Is this correct? > > > Should be. I haven't tried it either. Give it a shot if you're > interested. > > > > Sun's javaw runs native windows, not xwindows. Is there a way I can run > GUI > > java programs on windows using xwindows so they are compatible with > xhost > > and "ssh -X"? > > > Not without a java built to use Cygwin-X, no. > > > > I've been reading about gcj and that might work but it looks like I'd > have > > to recompile everything myself. I want to run eclipse on windows from a > > remote machine and I see in fedora core 4 they have recompiled eclipse > with > > gcj. But I was hoping I would not have to recompile eclipse from the > source. > > > > Does cygwin have a javax program that runs GUI java programs under > xwindows? > > Generic answer: > > > Specific answer: > 3.4.4-2&grep=javax> > > > -- > Larry Hall http://www.rfk.com > RFK Partners, Inc. (508) 893-9779 - RFK Office > 216 Dalton Rd. (508) 893-9889 - FAX > Holliston, MA 01746 > > -- > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > Problem reports: http://cygwin.com/problems.html > Documentation: http://x.cygwin.com/docs/ > FAQ: http://x.cygwin.com/docs/faq/ > > -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pechtcha@cs.nyu.edu Thu Jul 27 20:43:00 2006 From: pechtcha@cs.nyu.edu (Igor Peshansky) Date: Thu, 27 Jul 2006 20:43:00 -0000 Subject: XWindows version of Java? Message-ID: On Wed, 26 Jul 2006, siegfried wrote: > I notice the cygwin version of emacs runs in XWindows and is one of the > few XWindows programs I run frequently on windows. > > I assume (I have not tried it yet) I can run the cygwin version of emacs > on my home windows machine from a remote machine with the xhost and "ssh > -X" commands. Is this correct? If it's X-capable, which I believe the Cygwin emacs executable isn't. And the Cygwin xemacs package uses Win32 instead of X. > Sun's javaw runs native windows, not xwindows. Is there a way I can run > GUI java programs on windows using xwindows so they are compatible with > xhost and "ssh -X"? Only via remote desktop (Google for rdesktop). > I've been reading about gcj and that might work but it looks like I'd > have to recompile everything myself. I want to run eclipse on windows > from a remote machine and I see in fedora core 4 they have recompiled > eclipse with gcj. But I was hoping I would not have to recompile eclipse > from the source. You may have to (or use rdesktop). > Does cygwin have a javax program that runs GUI java programs under > xwindows? Unfortunately, no. When and if Sun open-sources its Java VM, it may or may not be buildable on Cygwin. But until then, you won't have Java over X from Windows. Igor -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From jasonkaruza@gmail.com Thu Jul 27 21:15:00 2006 From: jasonkaruza@gmail.com (Jason) Date: Thu, 27 Jul 2006 21:15:00 -0000 Subject: ImageMagick 6.0.4 no longer executes with package xorg-x11-bin-dlls 6.8.99.901-1 References: <44BB8A1E.7010303@yahoo.co.uk> Message-ID: > /usr/X11R6/bin/cygdpstk-1.dll. > > I also discovered that this DLL itself relies on another missing DLL: > /usr/X11R6/bin/cygdps-1.dll which I found in the same package. > > Work-around: > > I've fixed the problem for myself by grabbing these DLLs from the > previous version of this package (xorg-x11-bin-dlls-6.8.2.0) and > hand-installing them by copying them into the relevant directory. > Fortunately they are still compatible with the other DLLs they depend on. > I am trying to find the DLLs. Can you link me to them through my email? I did a good amount of googling without finding an actual link to the downloads (including on cygwin's site itself). Thanks. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From m.hadfield@niwa.co.nz Thu Jul 27 22:33:00 2006 From: m.hadfield@niwa.co.nz (Mark Hadfield) Date: Thu, 27 Jul 2006 22:33:00 -0000 Subject: ImageMagick 6.0.4 no longer executes with package xorg-x11-bin-dlls 6.8.99.901-1 In-Reply-To: References: <44BB8A1E.7010303@yahoo.co.uk> Message-ID: Jason wrote: >> I've fixed the problem for myself by grabbing these DLLs from the >> previous version of this package (xorg-x11-bin-dlls-6.8.2.0) and >> hand-installing them by copying them into the relevant directory. >> Fortunately they are still compatible with the other DLLs they depend on. > > I am trying to find the DLLs. Can you link me to them through my email? I did > a good amount of googling without finding an actual link to the downloads > (including on cygwin's site itself). I found them at http://mirrors.kernel.org/sources.redhat.com/cygwin/release/X11/xorg-x11-bin-dlls/xorg-x11-bin-dlls-6.8.2.0-1.tar.bz2 -- Mark Hadfield "Kei puwaha te tai nei, Hoea tahi tatou" m.hadfield@niwa.co.nz National Institute for Water and Atmospheric Research (NIWA) -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Thu Jul 27 22:44:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Thu, 27 Jul 2006 22:44:00 -0000 Subject: XWindows version of Java? In-Reply-To: References: Message-ID: Igor Peshansky wrote: > On Wed, 26 Jul 2006, siegfried wrote: > >> I notice the cygwin version of emacs runs in XWindows and is one of the >> few XWindows programs I run frequently on windows. >> >> I assume (I have not tried it yet) I can run the cygwin version of emacs >> on my home windows machine from a remote machine with the xhost and "ssh >> -X" commands. Is this correct? > > If it's X-capable, which I believe the Cygwin emacs executable isn't. > And the Cygwin xemacs package uses Win32 instead of X. Wrong, the xemacs shipped as Cygwin package can use both. And the answer to the OP is yes. >> Sun's javaw runs native windows, not xwindows. Is there a way I can run >> GUI java programs on windows using xwindows so they are compatible with >> xhost and "ssh -X"? > > Only via remote desktop (Google for rdesktop). Uh? Of course any Xwindows application can display on Cygwin's X server, java applications are just that, except many have an ugly default setting on window size and position (they use size 0x0 for instance) but that seems to be corrected in newer applications. >> I've been reading about gcj and that might work but it looks like I'd >> have to recompile everything myself. I want to run eclipse on windows >> from a remote machine and I see in fedora core 4 they have recompiled >> eclipse with gcj. But I was hoping I would not have to recompile eclipse >> from the source. > > You may have to (or use rdesktop). Eclipse running in a remote Linux machine can be shown fine on a local X server. Yes, Eclipse is being compiled with gcj (version 4.1.x not available currently under Cygwin) but that has nothing to do with showing Eclipse running on Linux. >> Does cygwin have a javax program that runs GUI java programs under >> xwindows? > > Unfortunately, no. When and if Sun open-sources its Java VM, it may or > may not be buildable on Cygwin. But until then, you won't have Java over > X from Windows. Sort of a cross-compiler but instead of code the cross targets display manager... sounds doable with gcj, even the old versions. But AFAIK no body has done it, all the development of gcj for Windows has been done under MingW, which by the way also has its own X server, but even there the AWT and Swing stuff has been replaced with SwingWT. -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pechtcha@cs.nyu.edu Thu Jul 27 23:35:00 2006 From: pechtcha@cs.nyu.edu (Igor Peshansky) Date: Thu, 27 Jul 2006 23:35:00 -0000 Subject: XWindows version of Java? In-Reply-To: References: Message-ID: On Thu, 27 Jul 2006, Ren?? Berber wrote: > Igor Peshansky wrote: > > On Wed, 26 Jul 2006, siegfried wrote: > > > >> I notice the cygwin version of emacs runs in XWindows and is one of > >> the few XWindows programs I run frequently on windows. > >> > >> I assume (I have not tried it yet) I can run the cygwin version of > >> emacs on my home windows machine from a remote machine with the xhost > >> and "ssh -X" commands. Is this correct? > > > > If it's X-capable, which I believe the Cygwin emacs executable isn't. > > And the Cygwin xemacs package uses Win32 instead of X. > > Wrong, the xemacs shipped as Cygwin package can use both. > > And the answer to the OP is yes. Fair enough. I'm not an emacs user, no wonder I missed that. > >> Sun's javaw runs native windows, not xwindows. Is there a way I can run > >> GUI java programs on windows using xwindows so they are compatible with > >> xhost and "ssh -X"? > > > > Only via remote desktop (Google for rdesktop). > > Uh? Of course any Xwindows application can display on Cygwin's X > server, java applications are just that, except many have an ugly > default setting on window size and position (they use size 0x0 for > instance) but that seems to be corrected in newer applications. I believe you've misread the OP's question. He's asking whether he can run Java on *Windows* and display the resulting GUI on a remote machine via "ssh -X". > >> I've been reading about gcj and that might work but it looks like I'd > >> have to recompile everything myself. I want to run eclipse on windows > >> from a remote machine and I see in fedora core 4 they have recompiled > >> eclipse with gcj. But I was hoping I would not have to recompile > >> eclipse from the source. > > > > You may have to (or use rdesktop). > > Eclipse running in a remote Linux machine can be shown fine on a local X > server. Yes, Eclipse is being compiled with gcj (version 4.1.x not > available currently under Cygwin) but that has nothing to do with > showing Eclipse running on Linux. If the OP wants to run Eclipse on Windows and display it on Linux via X, he'll have to rebuild using gcj. However, it would most likely not perform as well as the native Windows version does (which isn't much to begin with). Igor -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Shane.Hill@dsto.defence.gov.au Fri Jul 28 05:09:00 2006 From: Shane.Hill@dsto.defence.gov.au (Hill, Shane) Date: Fri, 28 Jul 2006 05:09:00 -0000 Subject: Keyboard and Mouse Input delay/pausing using 6.8.99.901 Message-ID: G'day All, I just updated to 6.8.99.901 from 6.8.2.0 for Xorg under Cygwin. Logging in via XDMCP to a remote hosts is causing me some issues now. I connect okay, but as soon as I enter some text into a Konsole or the like, a variable keyboard delay of 0.5-1.0 seconds seems to start. It also seems to be affecting mouse inputs as well. You click on a button and it ma react 0.5-1.0 seconds later. If I start the session and interact only with the mouse all is fine. As soon as I enter any text anywhere, this random delay/pausing starts to happen. It is strange that at the initial XDMCP login window, entering text does not seem to have any problems. The problem only starts after getting to the desktop stage. I get the effect with either KDE or Gnome desktops. It also effects Fedora5 and Ubuntu 6.06 systems. If I run version 6.8.2.0 the problem is resolved. If I use another X server like X-Win32 the problem is also resolved. I'd rather use the Cygwin X server because it seems much more compliant than other X servers for X11 and OpenGL work. Is anyone else getting this problem? Have Fun !! Shane Hill -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From colin.harrison@virgin.net Sun Jul 30 07:50:00 2006 From: colin.harrison@virgin.net (Colin Harrison) Date: Sun, 30 Jul 2006 07:50:00 -0000 Subject: Keyboard and Mouse Input delay/pausing using 6.8.99.901 Message-ID: <200607300750.k6U7oLEd026468@StraightRunning.com> Hi, Try logging in via XDMCP as a different user, and see if you get the same effect? Colin Harrison -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From colin.harrison@virgin.net Sun Jul 30 13:35:00 2006 From: colin.harrison@virgin.net (Colin Harrison) Date: Sun, 30 Jul 2006 13:35:00 -0000 Subject: Keyboard and Mouse Input delay/pausing using 6.8.99.901 Message-ID: <200607301335.k6UDZaBV000700@StraightRunning.com> Hi, More clues... This patch (hack!) fixes the latency you describe..but leaves a no-keypress repeat problem, for some users (not as bad a fault!) --- ./programs/Xserver/os/save_xdmcp.c 2006-07-30 11:56:30.000000000 +0100 +++ ./programs/Xserver/os/xdmcp.c 2006-07-30 13:49:09.000000000 +0100 @@ -721,7 +721,7 @@ keepaliveDormancy = defaultKeepaliveDormancy; } if (XFD_ANYSET(&AllClients) && state == XDM_RUN_SESSION) - timeOutTime = GetTimeInMillis() + keepaliveDormancy * 1000; + timeOutTime = 1; } else if (timeOutTime && (int) (GetTimeInMillis() - timeOutTime) >= 0) { Any explanation as to why the XDMCP state machine has gone wrong, with heavyweight display managers, is welcome. All my testing was done using XP SP2 fully patched up-to-date. Colin Harrison -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From craig.talbert@gmail.com Sun Jul 30 16:28:00 2006 From: craig.talbert@gmail.com (Craig Talbert) Date: Sun, 30 Jul 2006 16:28:00 -0000 Subject: 1.5.21-1: rxvt crashes when using -e In-Reply-To: <8e2fd6d70607300227x130ed183n7e7ba8450e6da6cd@mail.gmail.com> References: <8e2fd6d70607300227x130ed183n7e7ba8450e6da6cd@mail.gmail.com> Message-ID: <8e2fd6d70607300927o60968a22j452fc4eb97ee6e17@mail.gmail.com> After running setup to get the most recent version of rxvt, it seems that anything passed with the -e option will cause rxvt to crash (a window will open and immediately close). Example (causes crash): rxvt -sl -tn -cr red -sr -sl 10000 -e bash --login vs (won't cause crash). rxvt -sl -tn -cr red -sr -sl 10000 - Craig -------------- next part -------------- A non-text attachment was scrubbed... Name: cygcheck.out Type: application/octet-stream Size: 21184 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/