Unable to install X on 64-bit Windows 7 Premium

[Bob Kline]

On 8/10/2010 8:12 AM, Jon TURNEY wrote:

> gcc4-core.sh exit code 126
>
> This one is already reported at [1], and the workaround given 
> there,i.e. ....

Thanks for your reply.  I had seen that report, but was dismayed to see 
that the poster had received no response to his questions about whether 
the workaround really solved the problem or had just suppressed a 
symptom, leaving his system in a state which was causing subsequent 
installation actions (and other programs) to fail.

> ....
> Hmm... it seems that the output from these failing commands is only 
> captured in setup.log.full, not setup.log, so I think that messagebox 
> needs fixing.
>
> You can look there, or run these scripts manually (they can be found 
> in /etc/postinstall) and post the errors reported by those scripts so 
> we can fix the problems.
>

I will (may take a few days, as we're about to take our daughter down to 
college).  Thanks again.

-- 
Bob Kline
http://www.rksystems.com
mailto:bkline@rksystems.com


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://x.cygwin.com/docs/
FAQ:                   http://x.cygwin.com/docs/faq/